Hi Conor,
> On Tue, 2022-10-25 at 19:50 +0000, Conor Dooley - M52691 wrote:
> On 22/10/2022 12:21, Conor Dooley wrote:
> >
> > On Fri, Oct 21, 2022 at 12:29:19PM +0530, Padmarao Begari wrote:
> > > In the v2022.10 Icicle reference design, the seg registers are
> > > going to be
> >
> > Hey Padmarao,
> > Since the release was done the other day I think that this should
> > be
> > s/are going to be/have been
> >
> > > changed, resulting in a required change to the memory map.
> > > A small 4MB reservation is made at the end of 32-bit DDR to
> > > provide some
> > > memory for the HSS to use, so that it can cache its payload
> > > between
> > > reboots of a specific context.
> > >
> > > Co-developed-by: Conor Dooley <conor.doo...@microchip.com>
> > > Signed-off-by: Conor Dooley <conor.doo...@microchip.com>
> > > Signed-off-by: Padmarao Begari <padmarao.beg...@microchip.com>
> > > Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
> > > ---
> > > arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 70 ++++--------
> > > --------
> > > 1 file changed, 14 insertions(+), 56 deletions(-)
> > >
> > > diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > index 287ef3d23b..876c475069 100644
> > > --- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > +++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> > > @@ -1,6 +1,6 @@
> > > // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > /*
> > > - * Copyright (C) 2021 Microchip Technology Inc.
> > > + * Copyright (C) 2021-2022 Microchip Technology Inc.
> > > * Padmarao Begari <padmarao.beg...@microchip.com>
> > > */
> > >
> > > @@ -28,70 +28,28 @@
> > > timebase-frequency = <RTCCLK_FREQ>;
> > > };
> >
> > FWIW I think we should add the compatible that the linux dt has,
> > signifying that this memory layout is compatible with the v2022.10
> > release and later (w/ appropriate line-wrapping ofc):
> > compatible = "microchip,mpfs-icicle-reference-rtlv2210",
> > "microchip,mpfs-icicle-kit", "microchip,mpfs";
> >
> > Other than that:
> > Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
> >
> > > - reserved-memory {
> > > - ranges;
> > > - #size-cells = <2>;
> > > - #address-cells = <2>;
> > > -
> > > - fabricbuf0: fabricbuf@0 {
> > > - compatible = "shared-dma-pool";
> > > - reg = <0x0 0xae000000 0x0 0x2000000>;
> > > - label = "fabricbuf0-ddr-c";
> > > - };
> > > -
> > > - fabricbuf1: fabricbuf@1 {
> > > - compatible = "shared-dma-pool";
> > > - reg = <0x0 0xc0000000 0x0 0x8000000>;
> > > - label = "fabricbuf1-ddr-nc";
> > > - };
> > > -
> > > - fabricbuf2: fabricbuf@2 {
> > > - compatible = "shared-dma-pool";
> > > - reg = <0x0 0xd8000000 0x0 0x8000000>;
> > > - label = "fabricbuf2-ddr-nc-wcb";
> > > - };
> > > - };
> > > -
> > > - udmabuf0 {
> > > - compatible = "ikwzm,u-dma-buf";
> > > - device-name = "udmabuf-ddr-c0";
> > > - minor-number = <0>;
> > > - size = <0x0 0x2000000>;
> > > - memory-region = <&fabricbuf0>;
> > > - sync-mode = <3>;
> > > - };
> > > -
> > > - udmabuf1 {
> > > - compatible = "ikwzm,u-dma-buf";
> > > - device-name = "udmabuf-ddr-nc0";
> > > - minor-number = <1>;
> > > - size = <0x0 0x8000000>;
> > > - memory-region = <&fabricbuf1>;
> > > - sync-mode = <3>;
> > > - };
> > > -
> > > - udmabuf2 {
> > > - compatible = "ikwzm,u-dma-buf";
> > > - device-name = "udmabuf-ddr-nc-wcb0";
> > > - minor-number = <2>;
> > > - size = <0x0 0x8000000>;
> > > - memory-region = <&fabricbuf2>;
> > > - sync-mode = <3>;
> > > - };
> > > -
> > > ddrc_cache_lo: memory@80000000 {
> > > device_type = "memory";
> > > - reg = <0x0 0x80000000 0x0 0x2e000000>;
> > > - clocks = <&clkcfg CLK_DDRC>;
> > > + reg = <0x0 0x80000000 0x0 0x40000000>;
> > > status = "okay";
> > > };
> > >
> > > ddrc_cache_hi: memory@1000000000 {
>
> Sorry for not noticing prior, but this should bee changed too to
> match
> the reg property shouldn't it..
>
Yes, will update same.
Regards
Padmarao
> > > device_type = "memory";
> > > - reg = <0x10 0x0 0x0 0x40000000>;
> > > - clocks = <&clkcfg CLK_DDRC>;
> > > + reg = <0x10 0x40000000 0x0 0x40000000>;
> > > status = "okay";
> > > };
> > > +
> > > + reserved-memory {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + ranges;
> > > +
> > > + hss_payload: region@BFC00000 {
> > > + reg = <0x0 0xBFC00000 0x0 0x400000>;
> > > + no-map;
> > > + };
> > > + };
> > > };
> > >
> > > &uart1 {
> > > --
> > > 2.25.1
> > >
