On Fri, Oct 21, 2022 at 12:29:19PM +0530, Padmarao Begari wrote:
> In the v2022.10 Icicle reference design, the seg registers are going to be
Hey Padmarao,
Since the release was done the other day I think that this should be
s/are going to be/have been
> changed, resulting in a required change to the memory map.
> A small 4MB reservation is made at the end of 32-bit DDR to provide some
> memory for the HSS to use, so that it can cache its payload between
> reboots of a specific context.
>
> Co-developed-by: Conor Dooley <conor.doo...@microchip.com>
> Signed-off-by: Conor Dooley <conor.doo...@microchip.com>
> Signed-off-by: Padmarao Begari <padmarao.beg...@microchip.com>
> Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
> ---
> arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 70 ++++----------------
> 1 file changed, 14 insertions(+), 56 deletions(-)
>
> diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> index 287ef3d23b..876c475069 100644
> --- a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> +++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> - * Copyright (C) 2021 Microchip Technology Inc.
> + * Copyright (C) 2021-2022 Microchip Technology Inc.
> * Padmarao Begari <padmarao.beg...@microchip.com>
> */
>
> @@ -28,70 +28,28 @@
> timebase-frequency = <RTCCLK_FREQ>;
> };
FWIW I think we should add the compatible that the linux dt has,
signifying that this memory layout is compatible with the v2022.10
release and later (w/ appropriate line-wrapping ofc):
compatible = "microchip,mpfs-icicle-reference-rtlv2210",
"microchip,mpfs-icicle-kit", "microchip,mpfs";
Other than that:
Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
>
> - reserved-memory {
> - ranges;
> - #size-cells = <2>;
> - #address-cells = <2>;
> -
> - fabricbuf0: fabricbuf@0 {
> - compatible = "shared-dma-pool";
> - reg = <0x0 0xae000000 0x0 0x2000000>;
> - label = "fabricbuf0-ddr-c";
> - };
> -
> - fabricbuf1: fabricbuf@1 {
> - compatible = "shared-dma-pool";
> - reg = <0x0 0xc0000000 0x0 0x8000000>;
> - label = "fabricbuf1-ddr-nc";
> - };
> -
> - fabricbuf2: fabricbuf@2 {
> - compatible = "shared-dma-pool";
> - reg = <0x0 0xd8000000 0x0 0x8000000>;
> - label = "fabricbuf2-ddr-nc-wcb";
> - };
> - };
> -
> - udmabuf0 {
> - compatible = "ikwzm,u-dma-buf";
> - device-name = "udmabuf-ddr-c0";
> - minor-number = <0>;
> - size = <0x0 0x2000000>;
> - memory-region = <&fabricbuf0>;
> - sync-mode = <3>;
> - };
> -
> - udmabuf1 {
> - compatible = "ikwzm,u-dma-buf";
> - device-name = "udmabuf-ddr-nc0";
> - minor-number = <1>;
> - size = <0x0 0x8000000>;
> - memory-region = <&fabricbuf1>;
> - sync-mode = <3>;
> - };
> -
> - udmabuf2 {
> - compatible = "ikwzm,u-dma-buf";
> - device-name = "udmabuf-ddr-nc-wcb0";
> - minor-number = <2>;
> - size = <0x0 0x8000000>;
> - memory-region = <&fabricbuf2>;
> - sync-mode = <3>;
> - };
> -
> ddrc_cache_lo: memory@80000000 {
> device_type = "memory";
> - reg = <0x0 0x80000000 0x0 0x2e000000>;
> - clocks = <&clkcfg CLK_DDRC>;
> + reg = <0x0 0x80000000 0x0 0x40000000>;
> status = "okay";
> };
>
> ddrc_cache_hi: memory@1000000000 {
> device_type = "memory";
> - reg = <0x10 0x0 0x0 0x40000000>;
> - clocks = <&clkcfg CLK_DDRC>;
> + reg = <0x10 0x40000000 0x0 0x40000000>;
> status = "okay";
> };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hss_payload: region@BFC00000 {
> + reg = <0x0 0xBFC00000 0x0 0x400000>;
> + no-map;
> + };
> + };
> };
>
> &uart1 {
> --
> 2.25.1
>
