On Sun, Dec 19, 2010 at 9:18 PM, John Rigby <john.ri...@linaro.org> wrote:
> On Sun, Dec 19, 2010 at 5:56 PM, Alexander Holler <hol...@ahsoftware.de>
> wrote:
>> Am 20.12.2010 01:39, schrieb John Rigby:
>>>
>>> On Sun, Dec 19, 2010 at 12:59 PM, Alexander Holler<hol...@ahsoftware.de>
>>> wrote:
>>> ...
>>>>
>>>> No EEPROM on expansion board
>>>> Die ID #062a000400000000040365fa16019019
>>>> Hit any key to stop autoboot: 0
>>>> OMAP3 beagleboard.org # nand info
>>>>
>>>> Device 0: nand0, sector size 16 KiB
>>>> --------------------------------
>>>>
>>> I get the same output without your change. My gcc is linaro 4.4.5.
>>> I'll do some bisecting and try to find out what is going on.
>>
>> Bisecting won't help you here. Not if the problem was always there (which is
>> what I assume
> Sorry, I was confused about my results.
>
> If I replace include <asm/io.h> in drivers/mtd/nand/omap_gpmc.c with a
> copy of the original called orig_io.h:
> #include "orig_io.h"
>
> Nand starts working again. So the problem seems to be isolated to this file.
>>
>> Regards,
>>
>> Alexander
>>
>
With your patch and the following hack nand works:
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 99b9cef..5e94155 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -29,6 +29,8 @@
#include <linux/mtd/nand_ecc.h>
#include <nand.h>
+#define origwriteb(v,a) __arch_putb(v,a)
+
static uint8_t cs;
static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT;
@@ -58,7 +60,7 @@ static void omap_nand_hwcontrol(struct mtd_info
*mtd, int32_t cmd,
}
if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
+ origwriteb(cmd, this->IO_ADDR_W);
}
/*
The working assembly looks like this:
if (cmd != NAND_CMD_NONE)
80024d28: e3710001 cmn r1, #1
origwriteb(cmd, this->IO_ADDR_W);
80024d2c: 15933004 ldrne r3, [r3, #4]
80024d30: 120110ff andne r1, r1, #255 ; 0xff
80024d34: 15c31000 strbne r1, [r3]
80024d38: e8bd8010 pop {r4, pc}
The broken assembly looks like this:
if (cmd != NAND_CMD_NONE)
80024d28: e3710001 cmn r1, #1
80024d2c: 08bd8010 popeq {r4, pc}
writeb(cmd, this->IO_ADDR_W);
80024d30: e5933004 ldr r3, [r3, #4]
80024d34: e20110ff and r1, r1, #255 ; 0xff
80024d38: e5c31000 strb r1, [r3]
80024d3c: e5d33000 ldrb r3, [r3]
80024d40: e8bd8010 pop {r4, pc}
This is with gcc version "(Ubuntu/Linaro 4.4.4-14ubuntu4) 4.4.5".
I'll try a 4.5.2 version next and see what happens.
br,
John
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
