On Sun, Dec 19, 2010 at 3:22 AM, Alexander Holler <hol...@ahsoftware.de> wrote: > side effects here. Reading NAND now fails on my BeagleBoard. Regardless > if I use gcc 4.3.5 or gcc 4.5.1, after applying that patch the wrong ID > of the NAND is read. In nand_get_flash_type() > (drivers/mtd/nand/nand_base.c) without that patch I will get the following: > > *maf_id: 44, dev_id: 186 > > with the patch the following is read: > > *maf_id: 128, dev_id: 85 The nand_get_flash_type routine reads these id's twice and compares them. Do your see an error message like this?
second ID read did not match > > Which just is wrong. > > I haven't looked further up to now, maybe thats just a side effect of > some wrong clock settings because of different timings through those > barrieres or whatever. > > Regards, > > Alexander > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
