If env is stored on SD card then U-Boot SPL automatically calls mmc_init()
before it is going to load proper U-Boot from SD card.
If env is not stored on SD card then U-Boot SPL fails to read proper U-Boot
from SD card due to missing mmc_init() call.
So add missing mmc_init() call into fsl_esdhc_spl's mmc_boot() function.
It fixes booting from SD card on P2020 boards without env support in SPL.
mmc_init() returns early if card was already initialized, so there is no
issue with calling this function more times.
Signed-off-by: Pali Rohár <p...@kernel.org>
---
drivers/mmc/fsl_esdhc_spl.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index b87597a88e1d..0146a231b221 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -77,6 +77,11 @@ void __noreturn mmc_boot(void)
hang();
}
+ if (mmc_init(mmc)) {
+ puts("spl: mmc device init failed!\n");
+ hang();
+ }
+
#ifdef CONFIG_FSL_CORENET
offset = CONFIG_SYS_MMC_U_BOOT_OFFS;
#else
--
2.20.1
