Mike Rapoport wrote, on 11/23/2010 01:29 AM: minor comments follow: [...] > diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h > new file mode 100644 > index 0000000..514017d > --- /dev/null > +++ b/board/cm_t35/cm_t35.h [..] > + /*DSS*/\ > + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ > + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ > + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ > + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ > + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ > + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ > + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ > + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ > + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ > + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ > + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ > + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ > + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ > + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ > + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ > + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ > + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ > + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ > + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ > + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ > + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ > + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ > + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ > + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ > + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ > + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ > + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ > + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ Are you using bootlogo in CM-t35 u-boot?
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\ > + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\ might be better to state which GPIO than green led :) > + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ > + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ > + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ > + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ > + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ > + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\ this tiny set probably should go along with sdrc to reflect proper functional set I guess. > + > +#endif > diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk > new file mode 100644 > index 0000000..e81e283 > --- /dev/null > +++ b/board/cm_t35/config.mk > @@ -0,0 +1,30 @@ > +# > +# (C) Copyright 2009 > +# CompuLab, Ltd.,<www.compulab.co.il> > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, > +# MA 02111-1307 USA > +# > +# Physical Address: > +# 8000'0000 (bank0) > +# > +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 > +# (mem base + reserved) > + > +# For use with external or internal boots. > +CONFIG_SYS_TEXT_BASE = 0x80008000 > diff --git a/boards.cfg b/boards.cfg > index 6c2a667..e79b2d7 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee > omap3 > igep0030 arm armv7 igep0030 isee omap3 > am3517_evm arm armv7 am3517evm logicpd omap3 > devkit8000 arm armv7 devkit8000 timll omap3 > +cm_t35 arm armv7 cm_t35 - > omap3 > omap4_panda arm armv7 panda ti omap4 > omap4_sdp4430 arm armv7 sdp4430 ti > omap4 > s5p_goni arm armv7 goni samsung s5pc1xx > diff --git a/doc/README.omap3 b/doc/README.omap3 > index 6227151..460950d 100644 > --- a/doc/README.omap3 > +++ b/doc/README.omap3 > @@ -21,6 +21,8 @@ Currently the following boards are supported: > > * TI/Logic PD Zoom 2 [7] > > +* CompuLab Ltd. CM-T35 [8] > + > Toolchain > ========= > > @@ -61,6 +63,11 @@ make > make omap3_zoom2_config > make > > +* CM-T35: > + > +make cm_t35_config > +make > + > Custom commands > =============== > > @@ -119,7 +126,7 @@ To read a bit : > Acknowledgements > ================ > > -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by > +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by > several TI employees. > > Links > @@ -153,6 +160,11 @@ > http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit > [7] TI/Logic PD Zoom 2 > > > http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf > -[8] TI OMAP3 U-Boot: > + > +[8] CompuLab Ltd. CM-T35: > + > +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm > + > +[9] TI OMAP3 U-Boot: > > http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz > diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h > new file mode 100644 > index 0000000..63a4938 > --- /dev/null > +++ b/include/configs/cm_t35.h > @@ -0,0 +1,364 @@ > +/* > + * (C) Copyright 2006-2008 > + * Texas Instruments. > + * Richard Woodruff<r-woodru...@ti.com> > + * Syed Mohammed Khasim<x0kha...@ti.com> > + * 2010 copyright? > + * Configuration settings for the TI OMAP3530 Beagle board. ^^^^ need fixes.. > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +/* > + * High Level Configuration Options [...] -- Regards, Nishanth Menon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
