Andre Schwarz <andre.schw...@matrix-vision.de> wrote on 2010/10/25 15:50:19: > > Jocke, > > [snip] > > > You still haven't reported weather the 4 nop's helped or not, yet you > > seek my help. I am just going to ignore you until you do test it. > > > > > > finally I got both some time and hardware : > > 4 nops after _start does the trick, i.e. the board is up and running fine. > > > Diffing both System.maps and U-Boot hexdump gives only trivial results : > > - "in_flash" and "_start_of_vectors" adress increment = 0x10. > - offset calculation for relative branch instruction also increases by 0x10. > > > Let me know if you need more information or something else tested.
I am not looking at this as I am busy but I have an idea or two - CPU bug in 83xx CPUs which uses 0x110 as cold start vector. - Misconfig of HRCW, don't know if you can change the reset vector that way but I guess you need to check. I think a Freescale guy needs to look at this unless you can find something wrong with HRCW Jocke _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
