[PATCH V2 17/24] usb: ehci-mx6: Pass MISC address to usb_oc_config()

[Marek Vasut]

Instead of passing ad-hoc sequence number to usb_oc_config(), pass in
the USB MISC address itself. The USB MISC address comes from DT in DM
case, and from the old method using controller index in non-DM case.

Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number")
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Ye Li <ye...@nxp.com>
Cc: uboot-imx <uboot-...@nxp.com>
---
V2: No change
---
 drivers/usb/host/ehci-mx6.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index d022df04ab..99fd0e7183 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -260,15 +260,8 @@ int usb_phy_mode(int port)
 }
 #endif
 
-static void usb_oc_config(int index)
+static void usb_oc_config(struct usbnc_regs *usbnc, int index)
 {
-#if defined(CONFIG_MX6)
-       struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
-                       USB_OTHERREGS_OFFSET);
-#elif defined(CONFIG_MX7) || defined(CONFIG_MX7ULP)
-       struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
-                       (0x10000 * index) + USBNC_OFFSET);
-#endif
        void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]);
 
 #if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2
@@ -343,6 +336,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
        u32 controller_spacing = 0x200;
        struct anatop_regs __iomem *anatop =
                (struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
+       struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
+                       USB_OTHERREGS_OFFSET);
 #elif defined(CONFIG_MX7)
        u32 controller_spacing = 0x10000;
        struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
@@ -351,6 +346,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
        u32 controller_spacing = 0x10000;
        struct usbphy_regs __iomem *usbphy =
                (struct usbphy_regs __iomem *)USB_PHY0_BASE_ADDR;
+       struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
+                       (0x10000 * index) + USBNC_OFFSET);
 #endif
        struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
                (controller_spacing * index));
@@ -385,7 +382,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
        usb_power_config_mx7ulp(usbphy);
 #endif
 
-       usb_oc_config(index);
+       usb_oc_config(usbnc, index);
 
 #if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP)
        if (index < ARRAY_SIZE(phy_bases)) {
@@ -447,7 +444,7 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
        usb_power_config_mx7ulp(priv->phy_addr);
 #endif
 
-       usb_oc_config(priv->portnr);
+       usb_oc_config(priv->misc_addr, priv->portnr);
 
 #if !defined(CONFIG_PHY) && (defined(CONFIG_MX6) || defined(CONFIG_MX7ULP))
        usb_internal_phy_clock_gate(priv->phy_addr, 1);
@@ -697,7 +694,7 @@ static int ehci_usb_probe(struct udevice *dev)
        usb_power_config_mx7ulp(priv->phy_addr);
 #endif
 
-       usb_oc_config(priv->portnr);
+       usb_oc_config(priv->misc_addr, priv->portnr);
 
 #if !defined(CONFIG_PHY) && (defined(CONFIG_MX6) || defined(CONFIG_MX7ULP))
        usb_internal_phy_clock_gate(priv->phy_addr, 1);
-- 
2.30.2