There is now multiple copies of CONFIG_MXC_USB_PORTSC in configs set to
PORT_PTS_UTMI | PORT_PTS_PTW, which is in fact the default register value
for MX6, MX7 and MX7ULP. Define the default value of CONFIG_MXC_USB_PORTSC
in the driver and use it in case CONFIG_MXC_USB_PORTSC is not defined in
config, to reduce the duplication.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Ye Li <ye...@nxp.com>
Cc: uboot-imx <uboot-...@nxp.com>
---
V2: New patch
---
drivers/usb/host/ehci-mx6.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 8e20941855..d3308c60ee 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -68,6 +68,11 @@ DECLARE_GLOBAL_DATA_PTR;
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
#define UCMD_RESET (1 << 1) /* controller reset */
+/* If this is not defined, assume MX6/MX7/MX8M SoC default */
+#ifndef CONFIG_MXC_USB_PORTSC
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#endif
+
/* Base address for this IP block is 0x02184800 */
struct usbnc_regs {
u32 ctrl[4]; /* otg/host1-3 */
--
2.30.2
