On 1/2/21 5:44 PM, Marek Vasut wrote:
The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT.Signed-off-by: Marek Vasut <ma...@denx.de> Cc: Patrice Chotard <patrice.chot...@st.com> Cc: Patrick Delaunay <patrick.delau...@st.com> --- arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts index e8508aa4d5a..4948ccd4014 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts @@ -37,7 +37,7 @@ */ usb-hub { gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; + gpios = <8 0>; output-high; line-name = "rs485-rx-en"; }; @@ -65,7 +65,7 @@ */ usb-hub { gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; + gpios = <2 0>; output-high; line-name = "usb-hub-reset"; };
Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com> Thanks Patrick
