Hi Marek
On 1/2/21 5:44 PM, Marek Vasut wrote:
> The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
> Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
> correctness of the DT.
>
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Patrice Chotard <patrice.chot...@st.com>
> Cc: Patrick Delaunay <patrick.delau...@st.com>
> ---
> arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> index e8508aa4d5a..4948ccd4014 100644
> --- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> @@ -37,7 +37,7 @@
> */
> usb-hub {
> gpio-hog;
> - gpios = <8 GPIO_ACTIVE_HIGH>;
> + gpios = <8 0>;
> output-high;
> line-name = "rs485-rx-en";
> };
> @@ -65,7 +65,7 @@
> */
> usb-hub {
> gpio-hog;
> - gpios = <2 GPIO_ACTIVE_HIGH>;
> + gpios = <2 0>;
> output-high;
> line-name = "usb-hub-reset";
> };
Reviewed-by: Patrice Chotard <patrice.chot...@st.com>
Thanks
