[PATCH 2/2] ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02

[Marek Vasut]

The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Patrice Chotard <patrice.chot...@st.com>
Cc: Patrick Delaunay <patrick.delau...@st.com>
---
 arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts 
b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
index e8508aa4d5a..4948ccd4014 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
+++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
@@ -37,7 +37,7 @@
         */
        usb-hub {
                gpio-hog;
-               gpios = <8 GPIO_ACTIVE_HIGH>;
+               gpios = <8 0>;
                output-high;
                line-name = "rs485-rx-en";
        };
@@ -65,7 +65,7 @@
         */
        usb-hub {
                gpio-hog;
-               gpios = <2 GPIO_ACTIVE_HIGH>;
+               gpios = <2 0>;
                output-high;
                line-name = "usb-hub-reset";
        };
-- 
2.29.2