> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of Albert ARIBAUD > Sent: Sunday, October 03, 2010 4:37 PM > To: u-boot@lists.denx.de > Subject: Re: [U-Boot] denx/master is not building for OMAP3 platforms > except Beagle > > Le 03/10/2010 12:50, Hiremath, Vaibhav a écrit : > > Hi All, > > > > I think the current denx/matser is broken and is not building up for > OMAP3 platforms except Beagle board. > > > > The error message on build is - > > > > board.c: In function '__dram_init_banksize': > > board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in > this function) > > board.c:468: error: (Each undeclared identifier is reported only once > > board.c:468: error: for each function it appears in.) > > board.c: In function 'board_init_f': > > board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in > this function) > > board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in > this function) > > make[1]: *** [board.o] Error 1 > > make[1]: Leaving directory `/home/devel/git-work/denx- > uboot/arch/arm/lib' > > make: *** [arch/arm/lib/libarm.a] Error 2 > > > > > > The root-cause is- > > > > +#undef CONFIG_SYS_ARM_WITHOUT_RELOC > > +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > > +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - > CONFIG_SYS_GBL_DATA_SIZE) > > > > > > The above definition is missing in all (zoom1, zoom2, evm, am3517evm, > sdp3430, overo, Pandora) config files. > > > > Am I missing something here? Just wanted to cross-check before posting > patch to the list. > > This is due to the introduction of relocation on ARM platforms -- see > Wolfgang's recent release announcement. [Hiremath, Vaibhav] Yes that's correct. I am aware of that.
> > Note that adding the definition may not be sufficient to get relocation > working. > [Hiremath, Vaibhav] But atleast it will make code to compile cleanly. I feel, at any cost we should not add such patches which will break compilation, the code should build always. Thanks, Vaibhav > Amicalement, > -- > Albert. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
