Hi All, I think the current denx/matser is broken and is not building up for OMAP3 platforms except Beagle board.
The error message on build is - board.c: In function '__dram_init_banksize': board.c:468: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function) board.c:468: error: (Each undeclared identifier is reported only once board.c:468: error: for each function it appears in.) board.c: In function 'board_init_f': board.c:514: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in this function) board.c:547: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in this function) make[1]: *** [board.o] Error 1 make[1]: Leaving directory `/home/devel/git-work/denx-uboot/arch/arm/lib' make: *** [arch/arm/lib/libarm.a] Error 2 The root-cause is- +#undef CONFIG_SYS_ARM_WITHOUT_RELOC +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) The above definition is missing in all (zoom1, zoom2, evm, am3517evm, sdp3430, overo, Pandora) config files. Am I missing something here? Just wanted to cross-check before posting patch to the list. Thanks, Vaibhav _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
