On Wed, 16 Sep 2020, Maxime Ripard wrote:
On Wed, Sep 16, 2020 at 04:10:52PM +0200, Martin Cerveny wrote:
Add PWM and dummy power regulator support.
Modify data timings for LCD displays.
Signed-off-by: Martin Cerveny <m.cerv...@computer.org>
---
configs/LicheePi_Zero_defconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index 04d7b64504..ba1c085ec3 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -3,5 +3,9 @@ CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
# CONFIG_NETDEVICES is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_SUNXI=y
The LicheePi Zero doesn't have any display by default. Also you're
mentionning in your commit log that you "modify data timings", but I
don't see any timings in there?
CONFIG_VIDEO_LCD_DCLK_PHASE is LCD data clock phase,
standard "1" corrupts output on display,
see
- register "TCON0_IO_POL_REG" in V3S manual
- arch/arm/mach-sunxi/Kconfig
Regards.
