Hi Wolfgang,
On Thursday 02 September 2010 21:01:37 Wolfgang Denk wrote:
> Hm.., the whole CPU ID code in "arch/powerpc/cpu/ppc4xx/cpu.c" has
> become a mess.
>
> Stefan:
>
> is there any deeper logic for the repeated #ifdef's there, when we
> finally do a switch on the PVR anyway?
>
> Instead of painstakingly concatenating "AMCC PowerPC 4" with "05"
> and later "GP Rev. B" we could shrink this into a plain
>
> case PVR_405GP_RB:
> puts("AMCC PowerPC 405GP Rev. B");
> break;
>
> Or am I missing something?
IIRC, then the main reason for this is the code size reduction. Using your
version would increase the code size quite a bit. But I concur, it would be
much better readable. So just let me know, and I'll try to come up with a
patch cleaning this up a bit.
> Let's get rid of all these nested #ifdef's...
As described in some comments, the problem is that some SoC's have the same
PVR (for example 440EP rev C and 440GR rev B have same PVR). I have no idea
how this identification could be solved without such ifdef's.
But you are right. Some of the ifdef's can be removed. Again, this would also
result in a bigger image size though.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
