Dear Sergei, In message <20100807101848.636cb...@mosly> you wrote: > > I have 250GB USB-HDD attached to sheevaplug and using u-boot > > U-Boot 2010.03-00176-g42f7128 (Aug 06 2010 - 22:24:34) > Marvell-Sheevaplug > > It's a tip of 'u-boot-marvell/testing' branch.
Did you try current mainline instead? It is usually not recommended to use any of the custodian trees and especially their testing branches unless you know _exactly_ what these contain and what you are looking after. > [ 23.015860] scsi0 : usb-storage 1-1:1.0 > [ 26.054268] scsi 0:0:0:0: Direct-Access StoreJet Transcend > PQ: 0 ANSI: 2 CCS > [ 28.774083] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/232 GiB) ... > Device 0: Vendor: StoreJet Rev: Prod: Transcend > Type: Hard Disk > Capacity: 28759.9 MB = 28.0 GB (488397168 x 512) > > Heh, capacity is reported incorrectly, but it works am I'm able > to load kernel from there. The reason for this is that the multiplication 488397168 x 512 will overflow a 32 bit integer as used in "disk/part.c"; this shouldbe fixed... > All these things are almost 100% reproducible. > > Vendor-shipped (Marvell's) u-boot has exactly the same disease: > ** MARVELL BOARD: SHEEVA PLUG LE > U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16 This can be anything - issues with the USB driver, missing or incorrect initializatioon of the SoC, or even hardware issues. Can you try to debug it? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Who is the oldest inhabitant of this village?" "We haven't got one; we had one, but he died three weeks ago." _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
