Hi Fabio,

I am trying to enable LDO in an imx7ulp based board but somehow the
board locks up as soon I  write to PMC1_RUN (using the init_ldo_mode
sequence).

I think it is interesting that bit PMC0_CTRL_PMC1ON is already set so
I am wondering if you think it is possible - in your experience- that
ROM might have already configured LDO? or was this also the case -
this bit already set- when you tested the feature?

I also noticed that if I dont execute the init_ldo_mode sequence and
just check for the LODEN bit [see snipet below], this is already set
which too seems strange.

any suggestions or thoughts?

thanks in advance!

Jorge


#define PMC0_BASE_ADDR          0x410a1000
#define PMC0_CTRL               0x28
#define PMC0_CTRL_LDOEN         BIT(31)

static bool ldo_mode_is_enabled(void)
{
        unsigned int reg;

        reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
        if (reg & PMC0_CTRL_LDOEN)
                return true;
        else
                return false;
}

Reply via email to