Hi Fabio, On Mon, 13 Jan 2020 13:03:10 -0300 Fabio Estevam feste...@gmail.com wrote: ... > [ 1.039475] imx-scu scu: NXP i.MX SCU Initialized > [ 1.058681] imx8qxp-pinctrl scu:pinctrl: initialized IMX pinctrl driver > [ 1.087023] 5a060000.serial: ttyLP0 at MMIO 0x5a060000 (irq = 7, > base_baud = 5000000) is a FSL_LPUAR > > but then it hangs here when the serial driver is probed.
Currently I do not have an i.MX8QXP MEK board with RevB CPU and cannot test, but I have an i.MX8QXP based custom SoM with console on ttyLP2. Here I tested with NXP BSP kernel based on branch imx_4.14.98_2.0.0_ga and it boots successfully (with NFS rootfs or rootfs on eMMC). I cannot test NXP 4.19.35 kernel on this SoM yet, so not sure if it would boot. -- Anatolij
