Hi Peng, Have you managed to boot a mainline kernel with mainline U-Boot on a imx8qxp mek?
Here is what I get: U-Boot SPL 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800 U-Boot 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 32C Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF 70fa7bc Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Failed to enable ipg clk Warning: ethernet@5b040000 (eth0) using random MAC address - e2:9c:db:94:fc:d5 eth0: ethernet@5b040000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device 26221056 bytes read in 1134 ms (22.1 MiB/s) Booting from mmc ... 13953 bytes read in 14 ms (972.7 KiB/s) ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 0000000083000000, end 0000000083006680 Starting kernel ... [It hangs here] Booting a NXP kernel also did not work. Any ideas? Regards, Fabio Estevam
