> Subject: imx8qxp mek: Booting mainline kernel with mainline U-Boot > > Hi Peng, > > Have you managed to boot a mainline kernel with mainline U-Boot on a > imx8qxp mek?
I have not try that. Aisheng has some Linux patches pending which are restructuring the Linux side SCU 8QXP/QM code, so I not put efforts on booting mainline kernel. Regards, Peng. > > Here is what I get: > > U-Boot SPL 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) > Normal Boot > WDT: Not found! > Trying to boot from MMC2_2 > Load image from MMC/SD 0x46800 > > > U-Boot 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) > > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 32C > > Model: Freescale i.MX8QXP MEK > Board: iMX8QXP MEK > Build: SCFW 550f3079, SECO-FW d7523fe8, ATF 70fa7bc > Boot: SD1 > DRAM: 3 GiB > Failed to enable ipg clk > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > Loading Environment from MMC... OK > In: serial@5a060000 > Out: serial@5a060000 > Err: serial@5a060000 > Net: Failed to enable ipg clk > > Warning: ethernet@5b040000 (eth0) using random MAC address - > e2:9c:db:94:fc:d5 > eth0: ethernet@5b040000 > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc1 is current device > 26221056 bytes read in 1134 ms (22.1 MiB/s) Booting from mmc ... > 13953 bytes read in 14 ms (972.7 KiB/s) > ## Flattened Device Tree blob at 83000000 > Booting using the fdt blob at 0x83000000 > Using Device Tree in place at 0000000083000000, end > 0000000083006680 > > Starting kernel ... > [It hangs here] > > Booting a NXP kernel also did not work. > > Any ideas? > > Regards, > > Fabio Estevam