Wire reset-controller and use macros from reset header.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index dea918a0419a..a498ff9af623 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -12,6 +12,8 @@
* the License, or (at your option) any later version.
*/
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
@@ -154,6 +156,11 @@
mboxes = <&ipi_mailbox_pmu1 0>,
<&ipi_mailbox_pmu1 1>;
mbox-names = "tx", "rx";
};
+
+ zynqmp_reset: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
};
};
@@ -700,10 +707,18 @@
reg-names = "serdes", "siou", "lpd";
nvmem-cells = <&soc_revision>;
nvmem-cell-names = "soc_revision";
- resets = <&rst 16>, <&rst 59>, <&rst 60>,
- <&rst 61>, <&rst 62>, <&rst 63>,
- <&rst 64>, <&rst 3>, <&rst 29>,
- <&rst 30>, <&rst 31>, <&rst 32>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_SATA>,
+ <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+ <&zynqmp_reset ZYNQMP_RESET_USB0_APB>,
+ <&zynqmp_reset ZYNQMP_RESET_USB1_APB>,
+ <&zynqmp_reset ZYNQMP_RESET_DP>,
+ <&zynqmp_reset ZYNQMP_RESET_GEM0>,
+ <&zynqmp_reset ZYNQMP_RESET_GEM1>,
+ <&zynqmp_reset ZYNQMP_RESET_GEM2>,
+ <&zynqmp_reset ZYNQMP_RESET_GEM3>;
reset-names = "sata_rst", "usb0_crst", "usb1_crst",
"usb0_hibrst", "usb1_hibrst",
"usb0_apbrst",
"usb1_apbrst", "dp_rst", "gem0_rst",
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
