Use power header and add power-domains property.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
arch/arm/dts/zynqmp.dtsi | 43 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index a498ff9af623..6f81909043aa 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -12,6 +12,7 @@
* the License, or (at your option) any later version.
*/
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
/ {
@@ -286,6 +287,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_0>;
};
can1: can@ff070000 {
@@ -297,6 +299,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_1>;
};
cci: cci@fd6e0000 {
@@ -329,6 +332,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14e8>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -341,6 +345,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14e9>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -353,6 +358,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14ea>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -365,6 +371,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14eb>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -377,6 +384,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14ec>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -389,6 +397,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14ed>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -401,6 +410,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14ee>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -413,6 +423,7 @@
xlnx,bus-width = <128>;
#stream-id-cells = <1>;
iommus = <&smmu 0x14ef>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
gpu: gpu@fd4b0000 {
@@ -423,6 +434,7 @@
interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132
4>, <0 132 4>, <0 132 4>;
interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0",
"IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
clock-names = "gpu", "gpu_pp0", "gpu_pp1";
+ power-domains = <&zynqmp_firmware PD_GPU>;
};
/* LPDDMA default allows only secured access. inorder to enable
@@ -439,6 +451,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x868>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -451,6 +464,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x869>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -463,6 +477,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86a>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -475,6 +490,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86b>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -487,6 +503,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86c>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -499,6 +516,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86d>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -511,6 +529,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86e>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -523,6 +542,7 @@
xlnx,bus-width = <64>;
#stream-id-cells = <1>;
iommus = <&smmu 0x86f>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
mc: memory-controller@fd070000 {
@@ -543,6 +563,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x872>;
+ power-domains = <&zynqmp_firmware PD_NAND>;
};
gem0: ethernet@ff0b0000 {
@@ -556,6 +577,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x874>;
+ power-domains = <&zynqmp_firmware PD_ETH_0>;
};
gem1: ethernet@ff0c0000 {
@@ -569,6 +591,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x875>;
+ power-domains = <&zynqmp_firmware PD_ETH_1>;
};
gem2: ethernet@ff0d0000 {
@@ -582,6 +605,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x876>;
+ power-domains = <&zynqmp_firmware PD_ETH_2>;
};
gem3: ethernet@ff0e0000 {
@@ -595,6 +619,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x877>;
+ power-domains = <&zynqmp_firmware PD_ETH_3>;
};
gpio: gpio@ff0a0000 {
@@ -607,6 +632,7 @@
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
gpio-controller;
+ power-domains = <&zynqmp_firmware PD_GPIO>;
};
i2c0: i2c@ff020000 {
@@ -617,6 +643,7 @@
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_0>;
};
i2c1: i2c@ff030000 {
@@ -627,6 +654,7 @@
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_1>;
};
ocm: memory-controller@ff960000 {
@@ -665,6 +693,7 @@
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -686,6 +715,7 @@
#size-cells = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x873>;
+ power-domains = <&zynqmp_firmware PD_QSPI>;
};
rtc: rtc@ffa60000 {
@@ -743,6 +773,7 @@
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&zynqmp_firmware PD_SATA>;
#stream-id-cells = <4>;
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
<&smmu 0x4c2>, <&smmu 0x4c3>;
@@ -760,6 +791,7 @@
xlnx,device_id = <0>;
#stream-id-cells = <1>;
iommus = <&smmu 0x870>;
+ power-domains = <&zynqmp_firmware PD_SD_0>;
nvmem-cells = <&soc_revision>;
nvmem-cell-names = "soc_revision";
};
@@ -808,6 +840,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_0>;
};
spi1: spi@ff050000 {
@@ -819,6 +852,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_1>;
};
ttc0: timer@ff110000 {
@@ -828,6 +862,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_0>;
};
ttc1: timer@ff120000 {
@@ -837,6 +872,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_1>;
};
ttc2: timer@ff130000 {
@@ -846,6 +882,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_2>;
};
ttc3: timer@ff140000 {
@@ -855,6 +892,7 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_3>;
};
uart0: serial@ff000000 {
@@ -865,6 +903,7 @@
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_0>;
};
uart1: serial@ff010000 {
@@ -875,6 +914,7 @@
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_1>;
};
usb0: usb0@ff9d0000 {
@@ -884,6 +924,7 @@
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
+ power-domains = <&zynqmp_firmware PD_USB_0>;
ranges;
nvmem-cells = <&soc_revision>;
nvmem-cell-names = "soc_revision";
@@ -909,6 +950,7 @@
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9e0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
+ power-domains = <&zynqmp_firmware PD_USB_1>;
ranges;
nvmem-cells = <&soc_revision>;
nvmem-cell-names = "soc_revision";
@@ -1001,6 +1043,7 @@
interrupts = <0 122 4>;
interrupt-parent = <&gic>;
clock-names = "axi_clk";
+ power-domains = <&zynqmp_firmware PD_DP>;
dma-channels = <6>;
#dma-cells = <1>;
dma-video0channel {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
