Hi Stefano,

>> Has anyone tried the latest release on the i.MX31 PDK board? I
>> downloaded it on my board, using U-boot v2010.03-rc1 to download and
>> update U-boot, and after a reset it doesn't start. Since I don't have
>> a debugger right now I don't know more than that. I'll get my hands
>> on one and re-flash the board.
>>
>> As I mentioned, v2010.03-rc1 worked. I haven't tried any versions
>> after that. v2010.06 seems to work on the i.MX31 Litekit board
>> (Litekit boots from NOR, PDK boots from NAND).
> 
> I do not have a MX.31 board booting from NAND, I could only test on
> another board (qong) booting from NOR and I can at least confirm you
> there are no problems. It seems you cannot avoit to use the debugger to
> get some more info...

I have some updated info now, it might have been a problem with the 
v2010.03-rc1 that I use to reprogram the flash to 2010.06. After using the 
debugger to program 2010.06 the board boots nicely from NAND and I can also use 
2010.06 to reprogram the flash and board boots also after this reprogramming.


However, I have access to a board that boots from a small page NAND flash and 
v2010.06 does not boot on that board (2009.11 boots). After reverting 
f3bb63a304c4e76010a2a4e99da61f7b6ffffc77 (Add MX25 support to nand_spl fsl nfc 
driver) the board boots fine so I guess that commit broke i.MX31 small page 
NAND booting.

Haven't investigated why that commit breaks small page booting and I doubt I 
will spend time on it before mid August.

Regards, Magnus Lilja
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to