Magnus Lilja wrote: > Hi all, > Hi Magnus,
> > Has anyone tried the latest release on the i.MX31 PDK board? I > downloaded it on my board, using U-boot v2010.03-rc1 to download and > update U-boot, and after a reset it doesn't start. Since I don't have > a debugger right now I don't know more than that. I'll get my hands > on one and re-flash the board. > > As I mentioned, v2010.03-rc1 worked. I haven't tried any versions > after that. v2010.06 seems to work on the i.MX31 Litekit board > (Litekit boots from NOR, PDK boots from NAND). I do not have a MX.31 board booting from NAND, I could only test on another board (qong) booting from NOR and I can at least confirm you there are no problems. It seems you cannot avoit to use the debugger to get some more info... Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot