This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.
Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
---
depends on:
- http://patchwork.ozlabs.org/project/uboot/list/?series=110856
- http://patchwork.ozlabs.org/project/uboot/list/?series=109459
Changes in v2:
- Delete unnecessary i2c slave nodes.
arch/arm/dts/fsl-ls1088a-rdb.dts | 23 +++++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
index 765d1e3..0fe3519 100644
--- a/arch/arm/dts/fsl-ls1088a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -17,6 +17,29 @@
};
};
+&i2c0 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ rtc@51 {
+ compatible = "pcf2127-rtc";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
&qspi {
bus-num = <0>;
status = "okay";
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
