Lukasz, Marek, On 07/05/2019 17:54, Lukasz Majewski wrote: > On Tue, 7 May 2019 17:16:52 +0200 > Marek Vasut <ma...@denx.de> wrote: > >> On 5/7/19 5:11 PM, Neil Armstrong wrote: >>> Hi Marek, >>> >>> On 07/05/2019 15:05, Marek Vasut wrote: >>>> On 5/7/19 10:43 AM, Neil Armstrong wrote: >>>>> This patchset adds support for USB on Amlogic G12A SoCs. >>>>> >>>>> This patchset is composed with : >>>>> - PHY Drivers >>>>> - USB Control Glue driver >>>>> - G12A board setup for Device mode >>>>> >>>>> Device Tree nodes will be added in a separate patchset when >>>>> applied on a tagged Linux tree. >>>>> >>>>> The Amlogic G12A USB Complex is composed of : >>>>> - 2 USB Controllers : >>>>> * DWC3 for USB2 and USB3 Host functionality >>>>> * DWC2 for USB2 Peripheral functionality >>>>> - 2 USB2 OTG PHYs, only a single one will be routed to either >>>>> DWC2 to DWC3 >>>>> - 1 USB3 PHY shared with PCIE funcionnality >>>>> - A Glue to control PHY routing, setup and OTG detection >>>>> >>>>> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, >>>>> including routing of the OTG PHY between the DWC3 and DWC2 >>>>> controllers, and setups the on-chip OTG mode selection for this >>>>> PHY. >>>>> >>>>> This drivers supports the on-probe setup of the OTG mode, and >>>>> manually via a setup function in the G12A common board code. >>>>> >>>>> Changes since v2: >>>>> - rebased on u-boot master >>>>> >>>>> Changes since v1: >>>>> - switch printf() to debug() in patch 1 >>>>> >>>>> Neil Armstrong (3): >>>>> usb: dwc3: Add Meson G12A USB Glue >>>>> phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers >>>>> mach-meson: g12a: add DWC2 peripheral mode support >>>>> >>>>> arch/arm/include/asm/arch-meson/usb.h | 12 + >>>>> arch/arm/mach-meson/board-g12a.c | 126 +++++++ >>>>> drivers/phy/Kconfig | 8 + >>>>> drivers/phy/Makefile | 1 + >>>>> drivers/phy/meson-g12a-usb2.c | 216 ++++++++++++ >>>>> drivers/phy/meson-g12a-usb3-pcie.c | 345 +++++++++++++++++++ >>>>> drivers/usb/dwc3/Kconfig | 8 + >>>>> drivers/usb/dwc3/Makefile | 1 + >>>>> drivers/usb/dwc3/dwc3-meson-g12a.c | 456 >>>>> ++++++++++++++++++++++++++ 9 files changed, 1173 insertions(+) >>>>> create mode 100644 arch/arm/include/asm/arch-meson/usb.h >>>>> create mode 100644 drivers/phy/meson-g12a-usb2.c >>>>> create mode 100644 drivers/phy/meson-g12a-usb3-pcie.c >>>>> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c >>>>> >>>> Looks good to me, pick this via the meson tree please. >>>> >>> >>> No problem, but Lukasz wanted to pick it up. >>> >>> Lukasz, I can push it through u-boot-amlogic tree, is it ok for >>> you ? >> >> I don't care either way, whatever is comfortable for you two. >> > > Yes, please - use the u-boot-amlogic tree. Thanks in advance.
Done, thanks. Neil > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
