Hi Marek, On 07/05/2019 15:05, Marek Vasut wrote: > On 5/7/19 10:43 AM, Neil Armstrong wrote: >> This patchset adds support for USB on Amlogic G12A SoCs. >> >> This patchset is composed with : >> - PHY Drivers >> - USB Control Glue driver >> - G12A board setup for Device mode >> >> Device Tree nodes will be added in a separate patchset when applied >> on a tagged Linux tree. >> >> The Amlogic G12A USB Complex is composed of : >> - 2 USB Controllers : >> * DWC3 for USB2 and USB3 Host functionality >> * DWC2 for USB2 Peripheral functionality >> - 2 USB2 OTG PHYs, only a single one will be routed to either DWC2 to DWC3 >> - 1 USB3 PHY shared with PCIE funcionnality >> - A Glue to control PHY routing, setup and OTG detection >> >> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including >> routing of the OTG PHY between the DWC3 and DWC2 controllers, and >> setups the on-chip OTG mode selection for this PHY. >> >> This drivers supports the on-probe setup of the OTG mode, and manually >> via a setup function in the G12A common board code. >> >> Changes since v2: >> - rebased on u-boot master >> >> Changes since v1: >> - switch printf() to debug() in patch 1 >> >> Neil Armstrong (3): >> usb: dwc3: Add Meson G12A USB Glue >> phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers >> mach-meson: g12a: add DWC2 peripheral mode support >> >> arch/arm/include/asm/arch-meson/usb.h | 12 + >> arch/arm/mach-meson/board-g12a.c | 126 +++++++ >> drivers/phy/Kconfig | 8 + >> drivers/phy/Makefile | 1 + >> drivers/phy/meson-g12a-usb2.c | 216 ++++++++++++ >> drivers/phy/meson-g12a-usb3-pcie.c | 345 +++++++++++++++++++ >> drivers/usb/dwc3/Kconfig | 8 + >> drivers/usb/dwc3/Makefile | 1 + >> drivers/usb/dwc3/dwc3-meson-g12a.c | 456 ++++++++++++++++++++++++++ >> 9 files changed, 1173 insertions(+) >> create mode 100644 arch/arm/include/asm/arch-meson/usb.h >> create mode 100644 drivers/phy/meson-g12a-usb2.c >> create mode 100644 drivers/phy/meson-g12a-usb3-pcie.c >> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c >> > Looks good to me, pick this via the meson tree please. >
No problem, but Lukasz wanted to pick it up. Lukasz, I can push it through u-boot-amlogic tree, is it ok for you ? Thanks, Neil _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
