On 5/7/19 5:11 PM, Neil Armstrong wrote: > Hi Marek, > > On 07/05/2019 15:05, Marek Vasut wrote: >> On 5/7/19 10:43 AM, Neil Armstrong wrote: >>> This patchset adds support for USB on Amlogic G12A SoCs. >>> >>> This patchset is composed with : >>> - PHY Drivers >>> - USB Control Glue driver >>> - G12A board setup for Device mode >>> >>> Device Tree nodes will be added in a separate patchset when applied >>> on a tagged Linux tree. >>> >>> The Amlogic G12A USB Complex is composed of : >>> - 2 USB Controllers : >>> * DWC3 for USB2 and USB3 Host functionality >>> * DWC2 for USB2 Peripheral functionality >>> - 2 USB2 OTG PHYs, only a single one will be routed to either DWC2 to DWC3 >>> - 1 USB3 PHY shared with PCIE funcionnality >>> - A Glue to control PHY routing, setup and OTG detection >>> >>> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including >>> routing of the OTG PHY between the DWC3 and DWC2 controllers, and >>> setups the on-chip OTG mode selection for this PHY. >>> >>> This drivers supports the on-probe setup of the OTG mode, and manually >>> via a setup function in the G12A common board code. >>> >>> Changes since v2: >>> - rebased on u-boot master >>> >>> Changes since v1: >>> - switch printf() to debug() in patch 1 >>> >>> Neil Armstrong (3): >>> usb: dwc3: Add Meson G12A USB Glue >>> phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers >>> mach-meson: g12a: add DWC2 peripheral mode support >>> >>> arch/arm/include/asm/arch-meson/usb.h | 12 + >>> arch/arm/mach-meson/board-g12a.c | 126 +++++++ >>> drivers/phy/Kconfig | 8 + >>> drivers/phy/Makefile | 1 + >>> drivers/phy/meson-g12a-usb2.c | 216 ++++++++++++ >>> drivers/phy/meson-g12a-usb3-pcie.c | 345 +++++++++++++++++++ >>> drivers/usb/dwc3/Kconfig | 8 + >>> drivers/usb/dwc3/Makefile | 1 + >>> drivers/usb/dwc3/dwc3-meson-g12a.c | 456 ++++++++++++++++++++++++++ >>> 9 files changed, 1173 insertions(+) >>> create mode 100644 arch/arm/include/asm/arch-meson/usb.h >>> create mode 100644 drivers/phy/meson-g12a-usb2.c >>> create mode 100644 drivers/phy/meson-g12a-usb3-pcie.c >>> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c >>> >> Looks good to me, pick this via the meson tree please. >> > > No problem, but Lukasz wanted to pick it up. > > Lukasz, I can push it through u-boot-amlogic tree, is it ok for you ?
I don't care either way, whatever is comfortable for you two. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
