On 4/19/19 3:18 PM, Parthiban Nallathambi wrote: Hi,
[...] >>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig >>> index d29f1ca0b5..9336439340 100644 >>> --- a/arch/arm/mach-omap2/Kconfig >>> +++ b/arch/arm/mach-omap2/Kconfig >>> @@ -186,6 +186,7 @@ source "board/ti/am43xx/Kconfig" >>> source "board/ti/am335x/Kconfig" >>> source "board/compulab/cm_t335/Kconfig" >>> source "board/compulab/cm_t43/Kconfig" >>> +source "board/phytec/phycore_pcl060/Kconfig" >> >> Here [1] it says the name of the SoM is PCM-060 , what is PCL-060 ? >> >> [1] >> https://www.phytec.eu/product-eu/system-on-modules/phycore-am335x-download/ >> [...] > > This differs only by the connector. PCM variants are pluggable and PCL > variants > are direct soliderable to the carrier board. > > Copied from [1]: > The PCL-060 System On Module is a connector-less, BGA style variant of the > PCM-060/phyCORE-AM335x R2 SOM. Unlike traditional Phytec SOM products that > support > high density connectors, the PCL-060 SOM is directly soldered down to the > phyBOARD-Wega AM335x using Phytec's Direct Solder Connect technology (DSC). > This > solution offers an ultra-low cost Single Board Computer for the AM335x > processor, while > maintaining most of the advantages of the SOM concept. > > [1] https://www.phytec.de/fileadmin/user_upload/downloads/Manuals/L-845e_1.pdf Ah damn, this looks like a consistency problem is coming up. We have multiple PCM* SoMs in U-Boot, one PCL* SoM and now another PCL/PCM SoM. But the PCL063 isn't even manufactured in variant with connectors, so I guess we can ignore that one. I wonder whether we should stick to PCM* for all of the Phytec SoMs for consistency sake and document that PCL060 is also supported or maybe there's a better way ? [...] -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
