Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com>
On Mon, Mar 25, 2019 at 6:30 PM Marcel Ziswiler <mar...@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
>
> Migrate pinctrl and regulators to device tree resp. driver model: DDR,
> DSPI, ENET, ESDHC, I2C, NFC and UART.
>
> Enable CMD_DM, PINCTRL and DM_REGULATOR.
>
> While at it also update copyright period and sort include files.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
>
> ---
>
> Changes in v2: None
>
> board/toradex/colibri_vf/colibri_vf.c | 139 ++------------------------
> configs/colibri_vf_defconfig | 5 +
> 2 files changed, 16 insertions(+), 128 deletions(-)
>
> diff --git a/board/toradex/colibri_vf/colibri_vf.c
> b/board/toradex/colibri_vf/colibri_vf.c
> index 79f702f2bf..8e0dea2dc2 100644
> --- a/board/toradex/colibri_vf/colibri_vf.c
> +++ b/board/toradex/colibri_vf/colibri_vf.c
> @@ -1,43 +1,36 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * Copyright 2015 Toradex, Inc.
> + * Copyright 2015-2019 Toradex, Inc.
> *
> * Based on vf610twr.c:
> * Copyright 2013 Freescale Semiconductor, Inc.
> */
>
> #include <common.h>
> -#include <asm/io.h>
> +
> +#include <asm/arch/clock.h>
> +#include <asm/arch/crm_regs.h>
> +#include <asm/arch/ddrmc-vf610.h>
> #include <asm/arch/imx-regs.h>
> #include <asm/arch/iomux-vf610.h>
> -#include <asm/arch/ddrmc-vf610.h>
> -#include <asm/arch/crm_regs.h>
> -#include <asm/arch/clock.h>
> -#include <mmc.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> #include <fdt_support.h>
> #include <fsl_esdhc.h>
> #include <fsl_dcu_fb.h>
> +#include <g_dnl.h>
> +#include <i2c.h>
> #include <jffs2/load_kernel.h>
> #include <miiphy.h>
> +#include <mmc.h>
> #include <mtd_node.h>
> #include <netdev.h>
> -#include <i2c.h>
> -#include <g_dnl.h>
> -#include <asm/gpio.h>
> #include <usb.h>
> +
> #include "../common/tdx-common.h"
>
> DECLARE_GLOBAL_DATA_PTR;
>
> -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
> - PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
> -
> -#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
> - PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
> -
> -#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
> - PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
> -
> #define USB_PEN_GPIO 83
> #define USB_CDET_GPIO 102
> #define PTC0_GPIO_45 45
> @@ -89,11 +82,6 @@ static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
> { 0, -1 }
> };
>
> -static const iomux_v3_cfg_t usb_pads[] = {
> - VF610_PAD_PTD4__GPIO_83,
> - VF610_PAD_PTC29__GPIO_102,
> -};
> -
> int dram_init(void)
> {
> static const struct ddr3_jedec_timings timings = {
> @@ -147,92 +135,12 @@ int dram_init(void)
> .wldqsen = 25,
> };
>
> - ddrmc_setup_iomux(NULL, 0);
> -
> ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2);
> gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
>
> return 0;
> }
>
> -static void setup_iomux_uart(void)
> -{
> - static const iomux_v3_cfg_t uart_pads[] = {
> - NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTB10__UART0_TX, UART_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTB11__UART0_RX, UART_PAD_CTRL),
> - };
> -
> - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
> -}
> -
> -static void setup_iomux_enet(void)
> -{
> - static const iomux_v3_cfg_t enet0_pads[] = {
> - NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKOUT, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC10__RMII1_MDIO, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC9__RMII1_MDC, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC11__RMII1_CRS_DV, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC12__RMII1_RD1, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC13__RMII1_RD0, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC14__RMII1_RXER, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC15__RMII1_TD1, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC16__RMII1_TD0, ENET_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTC17__RMII1_TXEN, ENET_PAD_CTRL),
> - };
> -
> - imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
> -}
> -
> -static void setup_iomux_i2c(void)
> -{
> - static const iomux_v3_cfg_t i2c0_pads[] = {
> - VF610_PAD_PTB14__I2C0_SCL,
> - VF610_PAD_PTB15__I2C0_SDA,
> - };
> -
> - imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
> -}
> -
> -#ifdef CONFIG_NAND_VF610_NFC
> -static void setup_iomux_nfc(void)
> -{
> - static const iomux_v3_cfg_t nfc_pads[] = {
> - VF610_PAD_PTD23__NF_IO7,
> - VF610_PAD_PTD22__NF_IO6,
> - VF610_PAD_PTD21__NF_IO5,
> - VF610_PAD_PTD20__NF_IO4,
> - VF610_PAD_PTD19__NF_IO3,
> - VF610_PAD_PTD18__NF_IO2,
> - VF610_PAD_PTD17__NF_IO1,
> - VF610_PAD_PTD16__NF_IO0,
> - VF610_PAD_PTB24__NF_WE_B,
> - VF610_PAD_PTB25__NF_CE0_B,
> - VF610_PAD_PTB27__NF_RE_B,
> - VF610_PAD_PTC26__NF_RB_B,
> - VF610_PAD_PTC27__NF_ALE,
> - VF610_PAD_PTC28__NF_CLE
> - };
> -
> - imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
> -}
> -#endif
> -
> -#ifdef CONFIG_FSL_DSPI
> -static void setup_iomux_dspi(void)
> -{
> - static const iomux_v3_cfg_t dspi1_pads[] = {
> - VF610_PAD_PTD5__DSPI1_CS0,
> - VF610_PAD_PTD6__DSPI1_SIN,
> - VF610_PAD_PTD7__DSPI1_SOUT,
> - VF610_PAD_PTD8__DSPI1_SCK,
> - };
> -
> - imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
> -}
> -#endif
> -
> #ifdef CONFIG_VYBRID_GPIO
> static void setup_iomux_gpio(void)
> {
> @@ -344,20 +252,8 @@ int board_mmc_getcd(struct mmc *mmc)
>
> int board_mmc_init(bd_t *bis)
> {
> - static const iomux_v3_cfg_t esdhc1_pads[] = {
> - NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
> - NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
> - };
> -
> esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
>
> - imx_iomux_v3_setup_multiple_pads(
> - esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
> -
> return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> }
> #endif
> @@ -496,21 +392,10 @@ int board_early_init_f(void)
> clock_init();
> mscm_init();
>
> - setup_iomux_uart();
> - setup_iomux_enet();
> - setup_iomux_i2c();
> -#ifdef CONFIG_NAND_VF610_NFC
> - setup_iomux_nfc();
> -#endif
> -
> #ifdef CONFIG_VYBRID_GPIO
> setup_iomux_gpio();
> #endif
>
> -#ifdef CONFIG_FSL_DSPI
> - setup_iomux_dspi();
> -#endif
> -
> #ifdef CONFIG_VIDEO_FSL_DCU_FB
> setup_tcon();
> setup_iomux_fsl_dcu();
> @@ -594,8 +479,6 @@ int ft_board_setup(void *blob, bd_t *bd)
> #ifdef CONFIG_USB_EHCI_VF
> int board_ehci_hcd_init(int port)
> {
> - imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
> -
> switch (port) {
> case 0:
> /* USBC does not have PEN, also configured as USB client only
> */
> diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
> index 706d7ca634..9a91cb4b82 100644
> --- a/configs/colibri_vf_defconfig
> +++ b/configs/colibri_vf_defconfig
> @@ -27,6 +27,7 @@ CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_ASKENV=y
> CONFIG_CMD_MEMTEST=y
> CONFIG_CMD_DFU=y
> +CONFIG_CMD_DM=y
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_FUSE=y
> CONFIG_CMD_GPIO=y
> @@ -63,6 +64,10 @@ CONFIG_MTD_UBI_FASTMAP=y
> CONFIG_PHYLIB=y
> CONFIG_PHY_MICREL=y
> CONFIG_MII=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_VYBRID=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> # CONFIG_SPL_SERIAL_PRESENT is not set
> # CONFIG_TPL_SERIAL_PRESENT is not set
> CONFIG_DM_SERIAL=y
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
