From: Stefan Agner <stefan.ag...@toradex.com>
Set fdtfile to represent the current board. This allows distribution
to load the correct device tree, which in the module case often
deviates from the common fallback ${soc}-${board}${boardver}.dtb...
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Acked-by: Max Krummenacher <max.krummenac...@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
Changes in v2: None
include/configs/colibri_vf.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 83a33ff786..0bbeeb902e 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -86,7 +86,8 @@
"ubi read ${fdt_addr_r} dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-#define CONFIG_BOOTCOMMAND "run ubiboot; run distro_bootcmd;"
+#define CONFIG_BOOTCOMMAND "run ubiboot; " \
+ "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
@@ -108,7 +109,6 @@
"defargs=\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
"fdt_board=eval-v3\0" \
- "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
"fdt_fixup=;\0" \
"kernel_file=zImage\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
