Dear Tom, Marcel, Stefano
> Hi Marcel,
>
> > Hi Stefano
> >
> > On Wed, 2019-03-13 at 08:28 +0000, sba...@denx.de wrote:
> > > > The phy_connect_dev(...) function from phy.c does all the
> > > > handling (inclusive catching fixed-link).
> > > > So we drop here the single steps and call just
> > > > phy_connect_dev(...).
> > > > Signed-off-by: Hannes Schmelzer
> > > > <hannes.schmel...@br-automation.com
> > > > >
> > > > Acked-by: Joe Hershberger <joe.hershber...@ni.com>
> > >
> > > Applied to u-boot-imx, master, thanks !
> > >
> > > Best regards,
> > > Stefano Babic
> >
> > Unfortunately, this commit broke Ethernet on the Vybrid. When
> > re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid
> > fixes, device tree enablement and driver model conversion") I
> > noticed that Ethernet no longer works giving the following error
> > messages:
> >
> > Net: Could not get PHY for FEC0: addr -19
> > eth-1: fec@400d1000
> > Colibri VFxx # dhcp
> > Could not get PHY for FEC0: addr -19
> > Could not get PHY for FEC0: addr -19
> > Could not get PHY for FEC0: addr -19
> > Could not get PHY for FEC0: addr -19
> > No ethernet found.
> > Could not get PHY for FEC0: addr -19
> > Colibri VFxx #
> >
> > Bisecting points to this commit and reverting it indeed makes it
> > work again.
> >
> > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)?
>
> I did not checked yet - as I was waiting for the code to settle down
> to mainline (after the v2019.04 u-boot release).
>
> I will check it on bk4.Maybe not on BK4, but surely on (HSC): CPU: Freescale i.MX53 rev2.1 at 800 MHz => dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 I can confirm the error. So I do expect that we have some more IMX boards broken (imx53, vybrid). I think that it would be best to revert this patch before v2019.04 release and look for clean up opportunities afterwards. > > > > > Cheers > > > > Marcel > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lu...@denx.de Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpW2_JnjJ4E3.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
