Hi Marcel, > Hi Stefano > > On Wed, 2019-03-13 at 08:28 +0000, [email protected] wrote: > > > The phy_connect_dev(...) function from phy.c does all the handling > > > (inclusive catching fixed-link). > > > So we drop here the single steps and call just > > > phy_connect_dev(...). > > > Signed-off-by: Hannes Schmelzer > > > <[email protected] > > > > > > > Acked-by: Joe Hershberger <[email protected]> > > > > Applied to u-boot-imx, master, thanks ! > > > > Best regards, > > Stefano Babic > > Unfortunately, this commit broke Ethernet on the Vybrid. When > re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid > fixes, device tree enablement and driver model conversion") I noticed > that Ethernet no longer works giving the following error messages: > > Net: Could not get PHY for FEC0: addr -19 > eth-1: fec@400d1000 > Colibri VFxx # dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > Colibri VFxx # > > Bisecting points to this commit and reverting it indeed makes it work > again. > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)?
I did not checked yet - as I was waiting for the code to settle down to mainline (after the v2019.04 u-boot release). I will check it on bk4. > > Cheers > > Marcel Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
pgpi1RIxBv8us.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
