Hi Stefano
On Wed, 2019-03-13 at 08:28 +0000, sba...@denx.de wrote:
> > The phy_connect_dev(...) function from phy.c does all the handling
> > (inclusive catching fixed-link).
> > So we drop here the single steps and call just
> > phy_connect_dev(...).
> > Signed-off-by: Hannes Schmelzer <hannes.schmel...@br-automation.com
> > >
> > Acked-by: Joe Hershberger <joe.hershber...@ni.com>
>
> Applied to u-boot-imx, master, thanks !
>
> Best regards,
> Stefano Babic
Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing
my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device
tree enablement and driver model conversion") I noticed that Ethernet
no longer works giving the following error messages:
Net: Could not get PHY for FEC0: addr -19
eth-1: fec@400d1000
Colibri VFxx # dhcp
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
No ethernet found.
Could not get PHY for FEC0: addr -19
Colibri VFxx #
Bisecting points to this commit and reverting it indeed makes it work
again.
Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)?
Cheers
Marcel
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
