Add Allwinner sun6i SPI driver for A31, H3/H5 an A64.
Cc: Fahad Sadah <fa...@sadah.uk>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
drivers/spi/sun6i_spi.c | 398 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 405 insertions(+)
create mode 100644 drivers/spi/sun6i_spi.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a7bb5b35c2..a7d5f70bc3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -223,6 +223,12 @@ config SUN4I_SPI
help
SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+config SUN6I_SPI
+ bool "Allwinner A31 SPI controller"
+ depends on ARCH_SUNXI
+ help
+ This enables using the SPI controller on the Allwinner A31 SoCs.
+
config TEGRA114_SPI
bool "nVidia Tegra114 SPI driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 392a925795..54826171b5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_SH_SPI) += sh_spi.o
obj-$(CONFIG_SH_QSPI) += sh_qspi.o
obj-$(CONFIG_STM32_QSPI) += stm32_qspi.o
obj-$(CONFIG_SUN4I_SPI) += sun4i_spi.o
+obj-$(CONFIG_SUN6I_SPI) += sun6i_spi.o
obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
diff --git a/drivers/spi/sun6i_spi.c b/drivers/spi/sun6i_spi.c
new file mode 100644
index 0000000000..957a154528
--- /dev/null
+++ b/drivers/spi/sun6i_spi.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <ja...@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset.h>
+#include <spi.h>
+
+#include <asm/bitops.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SUN8I_FIFO_DEPTH 64
+
+#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
+#define SUN6I_GBL_CTL_MASTER BIT(1)
+#define SUN6I_GBL_CTL_TP BIT(7)
+#define SUN6I_GBL_CTL_RST BIT(31)
+
+#define SUN6I_TFR_CTL_CPHA BIT(0)
+#define SUN6I_TFR_CTL_CPOL BIT(1)
+#define SUN6I_TFR_CTL_SPOL BIT(2)
+#define SUN6I_TFR_CTL_CS_MASK 0x30
+#define SUN6I_TFR_CTL_CS(cs) (((cs) << 4) &
SUN6I_TFR_CTL_CS_MASK)
+#define SUN6I_TFR_CTL_CS_MANUAL BIT(6)
+#define SUN6I_TFR_CTL_CS_LEVEL BIT(7)
+#define SUN6I_TFR_CTL_DHB BIT(8)
+#define SUN6I_TFR_CTL_FBS BIT(12)
+#define SUN6I_TFR_CTL_XCH_MASK 0x80000000
+#define SUN6I_TFR_CTL_XCH BIT(31)
+
+#define SUN6I_FIFO_CTL_RF_RST BIT(15)
+#define SUN6I_FIFO_CTL_TF_RST BIT(31)
+
+#define SUN6I_FIFO_STA_RF_CNT_MASK 0xff
+#define SUN6I_FIFO_STA_RF_CNT_BITS 0
+
+#define SUN6I_CLK_CTL_CDR2_MASK 0xff
+#define SUN6I_CLK_CTL_CDR2(div) (((div) &
SUN6I_CLK_CTL_CDR2_MASK) << 0)
+#define SUN6I_CLK_CTL_CDR1_MASK 0xf
+#define SUN6I_CLK_CTL_CDR1(div) (((div) &
SUN6I_CLK_CTL_CDR1_MASK) << 8)
+#define SUN6I_CLK_CTL_DRS BIT(12)
+
+#define SUN6I_MAX_XFER_SIZE 0xffffff
+#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+
+#define SUNXI_SPI_FIFO_RF_CNT_MASK 0xff
+#define SUNXI_SPI_FIFO_RF_CNT_BITS 0
+#define SUNXI_SPI_FIFO_TF_CNT_MASK 0xff
+#define SUNXI_SPI_FIFO_TF_CNT_BITS 16
+
+#define SUN6I_SPI_MAX_RATE (24 * 1000 * 1000)
+#define SUN6I_SPI_MIN_RATE (3 * 1000)
+
+struct sun6i_spi_regs {
+ u32 res0;
+ u32 gblctl; /* 0x04 */
+ u32 tfrctl; /* 0x08 */
+ u32 res1;
+ u32 intctl; /* 0x10 */
+ u32 intsta; /* 0x14 */
+ u32 fifoctl; /* 0x18 */
+ u32 fifosta; /* 0x1c */
+ u32 res2; /* 0x20 */
+ u32 clkctl; /* 0x24 */
+ u32 res3[2];
+ u32 burstcnt; /* 0x30 */
+ u32 xmitcnt; /* 0x34 */
+ u32 burstctl; /* 0x38 */
+ u32 res4[113];
+ u32 txdata; /* 0x200 */
+ u32 res5[63];
+ u32 rxdata; /* 0x300 */
+};
+
+struct sun6i_spi_priv {
+ struct sun6i_spi_regs *regs;
+ u32 fifo_depth;
+ struct clk clk_ahb;
+ struct clk clk_mod;
+ struct reset_ctl reset;
+
+ const u8 *tx_buf;
+ u8 *rx_buf;
+};
+
+struct sun6i_spi_platdata {
+ u32 base;
+};
+
+static void sun6i_spi_drain_fifo(struct sun6i_spi_priv *priv, int len)
+{
+ u8 byte;
+
+ while (len--) {
+ byte = readb(&priv->regs->rxdata);
+ if (priv->rx_buf)
+ *priv->rx_buf++ = byte;
+ }
+}
+
+static void sun6i_spi_fill_fifo(struct sun6i_spi_priv *priv, int len)
+{
+ u8 byte;
+
+ while (len--) {
+ byte = priv->tx_buf ? *priv->tx_buf++ : 0;
+ writeb(byte, &priv->regs->txdata);
+ }
+}
+
+static inline u32 sun6i_spi_get_rx_fifo_count(struct sun6i_spi_priv *priv)
+{
+ u32 reg = readl(&priv->regs->fifosta);
+
+ reg >>= SUN6I_FIFO_STA_RF_CNT_BITS;
+
+ return reg & SUN6I_FIFO_STA_RF_CNT_MASK;
+}
+
+static void sun6i_spi_set_cs(struct udevice *dev, u8 cs, bool enable)
+{
+ struct udevice *bus = dev->parent;
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ u32 reg;
+
+ reg = readl(&priv->regs->tfrctl);
+ reg &= ~SUN6I_TFR_CTL_CS_MASK;
+
+ if (enable)
+ reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
+
+ if (enable)
+ reg |= SUN6I_TFR_CTL_CS(cs);
+ else
+ reg |= SUN6I_TFR_CTL_CS_LEVEL;
+
+ writel(reg, &priv->regs->tfrctl);
+}
+
+static int sun6i_spi_claim_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev->parent;
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ int ret;
+
+ ret = clk_enable(&priv->clk_ahb);
+ if (ret) {
+ dev_err(dev, "failed to enable ahb clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(&priv->clk_mod);
+ if (ret) {
+ dev_err(dev, "failed to enable mod clock\n");
+ goto err_ahb;
+ }
+
+ ret = reset_deassert(&priv->reset);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset\n");
+ goto err_mod;
+ }
+
+ setbits_le32(&priv->regs->gblctl, SUN6I_GBL_CTL_MASTER |
+ SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_TP |
+ SUN6I_GBL_CTL_RST);
+ setbits_le32(&priv->regs->tfrctl, SUN6I_TFR_CTL_CS_MANUAL |
+ SUN6I_TFR_CTL_CS_LEVEL);
+
+ return 0;
+
+err_mod:
+ clk_disable(&priv->clk_mod);
+err_ahb:
+ clk_disable(&priv->clk_ahb);
+ return ret;
+}
+
+static int sun6i_spi_release_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev->parent;
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+
+ clrbits_le32(&priv->regs->gblctl, SUN6I_GBL_CTL_BUS_ENABLE);
+ clk_disable(&priv->clk_ahb);
+ clk_disable(&priv->clk_mod);
+ reset_assert(&priv->reset);
+
+ return 0;
+}
+
+static int sun6i_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev->parent;
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ u32 len = bitlen / 8;
+ u32 rx_fifocnt;
+ u8 nbytes;
+
+ priv->tx_buf = dout;
+ priv->rx_buf = din;
+
+ if (bitlen % 8) {
+ debug("%s: non byte-aligned SPI transfer.\n", __func__);
+ return -EINVAL;
+ }
+
+ if (flags & SPI_XFER_BEGIN)
+ sun6i_spi_set_cs(dev, slave_plat->cs, true);
+
+ /* Reset FIFOs */
+ setbits_le32(&priv->regs->fifoctl, SUN6I_FIFO_CTL_RF_RST |
+ SUN6I_FIFO_CTL_TF_RST);
+
+ while (len) {
+ /* Setup the transfer now... */
+ nbytes = min(len, priv->fifo_depth - 1);
+
+ /* Setup the counters */
+ writel(SUN6I_BURST_CNT(nbytes), &priv->regs->burstcnt);
+ writel(SUN6I_XMIT_CNT(nbytes), &priv->regs->xmitcnt);
+ writel(SUN6I_BURST_CTL_CNT_STC(nbytes), &priv->regs->burstctl);
+
+ /* Fill the TX FIFO */
+ sun6i_spi_fill_fifo(priv, nbytes);
+
+ /* Start the transfer */
+ setbits_le32(&priv->regs->tfrctl, SUN6I_TFR_CTL_XCH);
+
+ /**
+ * Wait transfer to complete
+ *
+ * readl_poll_timeout cannot work since it require
+ * an extra delay between reads.
+ */
+ do {
+ rx_fifocnt = sun6i_spi_get_rx_fifo_count(priv);
+ } while (rx_fifocnt < nbytes);
+
+ /* Drain the RX FIFO */
+ sun6i_spi_drain_fifo(priv, nbytes);
+
+ len -= nbytes;
+ }
+
+ if (flags & SPI_XFER_END)
+ sun6i_spi_set_cs(dev, slave_plat->cs, false);
+
+ return 0;
+}
+
+static int sun6i_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ unsigned int div;
+ u32 reg;
+
+ speed = min(speed, (unsigned int)SUN6I_SPI_MAX_RATE);
+ speed = max((unsigned int)SUN6I_SPI_MIN_RATE, speed);
+
+ /*
+ * Setup clock divider.
+ *
+ * We have two choices there. Either we can use the clock
+ * divide rate 1, which is calculated thanks to this formula:
+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
+ * Or we can use CDR2, which is calculated with the formula:
+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
+ * Whether we use the former or the latter is set through the
+ * DRS bit.
+ *
+ * First try CDR2, and if we can't reach the expected
+ * frequency, fall back to CDR1.
+ */
+ reg = readl(&priv->regs->clkctl);
+ div = SUN6I_SPI_MAX_RATE / (2 * speed);
+ if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
+ if (div > 0)
+ div--;
+
+ reg |= SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
+ } else {
+ div = __ilog2(SUN6I_SPI_MAX_RATE) - __ilog2(speed);
+ reg |= SUN6I_CLK_CTL_CDR1(div);
+ }
+
+ writel(reg, &priv->regs->clkctl);
+
+ return 0;
+}
+
+static int sun6i_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ u32 reg;
+
+ reg = readl(&priv->regs->tfrctl);
+ reg &= ~(SUN6I_TFR_CTL_CPOL | SUN6I_TFR_CTL_CPHA |
+ SUN6I_TFR_CTL_FBS);
+
+ if (mode & SPI_CPOL)
+ reg |= SUN6I_TFR_CTL_CPOL;
+
+ if (mode & SPI_CPHA)
+ reg |= SUN6I_TFR_CTL_CPHA;
+
+ if (mode & SPI_LSB_FIRST)
+ reg |= SUN6I_TFR_CTL_FBS;
+
+ writel(reg, &priv->regs->tfrctl);
+
+ return 0;
+}
+
+static int sun6i_spi_probe(struct udevice *bus)
+{
+ struct sun6i_spi_platdata *plat = dev_get_platdata(bus);
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ unsigned int pin_function = SUNXI_GPC_SPI0;
+ int pin, ret;
+
+ priv->regs = (struct sun6i_spi_regs *)(uintptr_t)plat->base;
+ priv->fifo_depth = dev_get_driver_data(bus);
+
+ /* TODO This pin functions will drop, once sunxi pinctrl in Mainline */
+ if (IS_ENABLED(CONFIG_MACH_SUN50I))
+ pin_function = SUN50I_GPC_SPI0;
+
+ for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(3); pin++)
+ sunxi_gpio_set_cfgpin(pin, pin_function);
+
+ ret = clk_get_by_name(bus, "ahb", &priv->clk_ahb);
+ if (ret) {
+ dev_err(dev, "failed to get ahb clock\n");
+ return ret;
+ }
+
+ ret = clk_get_by_name(bus, "mod", &priv->clk_mod);
+ if (ret) {
+ dev_err(dev, "failed to get mod clock\n");
+ return ret;
+ }
+
+ ret = reset_get_by_index(bus, 0, &priv->reset);
+ if (ret) {
+ dev_err(dev, "failed to get reset\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sun6i_spi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct sun6i_spi_platdata *plat = dev_get_platdata(bus);
+
+ plat->base = devfdt_get_addr(bus);
+
+ return 0;
+}
+
+static const struct dm_spi_ops sun6i_spi_ops = {
+ .claim_bus = sun6i_spi_claim_bus,
+ .release_bus = sun6i_spi_release_bus,
+ .xfer = sun6i_spi_xfer,
+ .set_speed = sun6i_spi_set_speed,
+ .set_mode = sun6i_spi_set_mode,
+};
+
+static const struct udevice_id sun6i_spi_ids[] = {
+ { .compatible = "allwinner,sun8i-h3-spi", .data = SUN8I_FIFO_DEPTH },
+ { }
+};
+
+U_BOOT_DRIVER(sun6i_spi) = {
+ .name = "sun6i_spi",
+ .id = UCLASS_SPI,
+ .of_match = sun6i_spi_ids,
+ .ops = &sun6i_spi_ops,
+ .ofdata_to_platdata = sun6i_spi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct sun6i_spi_platdata),
+ .priv_auto_alloc_size = sizeof(struct sun6i_spi_priv),
+ .probe = sun6i_spi_probe,
+};
--
2.18.0.321.gffc6fa0e3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
