Adds coprocessor communication POST code.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
board/pdm360ng/Makefile | 1 +
board/pdm360ng/post.c | 75 ++++++++++++++++++++++++++++++++++++++++++++
include/configs/pdm360ng.h | 5 +++
include/post.h | 1 +
post/tests.c | 13 +++++++
5 files changed, 95 insertions(+), 0 deletions(-)
create mode 100644 board/pdm360ng/post.c
diff --git a/board/pdm360ng/Makefile b/board/pdm360ng/Makefile
index 8513242..113ac0a 100644
--- a/board/pdm360ng/Makefile
+++ b/board/pdm360ng/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o
+COBJS-$(CONFIG_HAS_POST) += post.o
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/pdm360ng/post.c b/board/pdm360ng/post.c
new file mode 100644
index 0000000..8e47c5e
--- /dev/null
+++ b/board/pdm360ng/post.c
@@ -0,0 +1,75 @@
+/*
+ * Co-Processor communication POST
+ */
+
+#include <common.h>
+#include <post.h>
+#include <serial.h>
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/*
+ * Actually the termination sequence of the coprocessor
+ * commands is "\r\n" (CR LF), but here we use a side effect of
+ * the putc() routine of the serial driver which checks for LF
+ * and sends CR before sending LF. Therefore the termination
+ * sequence in the command below is only "\n".
+ * "alive" string is the coprocessor response for ping command
+ * and not a command, therefore it is terminated with "\r\n".
+ */
+char alive[] = "$AL;38\r\n";
+char ping[] = "$PI;2C\n";
+
+int pdm360ng_coprocessor_post_test(int flags)
+{
+ struct stdio_dev *cop_port;
+ int ret;
+ char buf[10];
+
+ /* Test IO Coprocessor communication */
+ cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+ if (!cop_port)
+ return -1;
+
+ write_port(cop_port, ping);
+ udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+ memset(buf, 0, sizeof(buf));
+ ret = read_port(cop_port, buf, sizeof(buf));
+ close_port(4);
+ if (ret <= 0) {
+ post_log("Error: Can't read IO Coprocessor port.\n");
+ return -1;
+ }
+
+ if (strcmp(buf, alive)) {
+ post_log("Error: IO-Cop. resp.: %s\n", buf);
+ return -1;
+ }
+
+ /* Test WD Coprocessor communication */
+ cop_port = open_port(1, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+ if (!cop_port) {
+ post_log("Error: Can't open WD Coprocessor port.\n");
+ return -1;
+ }
+
+ write_port(cop_port, ping);
+ udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+ memset(buf, 0, sizeof(buf));
+ ret = read_port(cop_port, buf, sizeof(buf));
+ close_port(1);
+ if (ret <= 0) {
+ post_log("Error: Can't read WD Coprocessor port.\n");
+ return -1;
+ }
+
+ if (strcmp(buf, alive)) {
+ post_log("Error: WD-Cop. resp.: %s\n", buf);
+ return -1;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_SERIAL_MULTI */
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index b7d8221..8299e0c 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -456,6 +456,11 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+#ifdef CONFIG_SERIAL_MULTI
+/* POST support */
+#define CONFIG_POST (CONFIG_SYS_POST_COPROC)
+#endif
+
/*
* Environment Configuration
*/
diff --git a/include/post.h b/include/post.h
index ff83bce..3da959d 100644
--- a/include/post.h
+++ b/include/post.h
@@ -124,6 +124,7 @@ extern int post_hotkeys_pressed(void);
#define CONFIG_SYS_POST_BSPEC4 0x00080000
#define CONFIG_SYS_POST_BSPEC5 0x00100000
#define CONFIG_SYS_POST_CODEC 0x00200000
+#define CONFIG_SYS_POST_COPROC 0x00400000
#endif /* CONFIG_POST */
diff --git a/post/tests.c b/post/tests.c
index 3224f00..5c69157 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -53,6 +53,7 @@ extern int gdc_post_test (int flags);
extern int fpga_post_test (int flags);
extern int lwmon5_watchdog_post_test(int flags);
extern int sysmon1_post_test(int flags);
+extern int pdm360ng_coprocessor_post_test(int flags);
extern int sysmon_init_f (void);
@@ -286,6 +287,18 @@ struct post_test post_list[] =
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC5
CONFIG_POST_BSPEC5,
#endif
+#if CONFIG_POST & CONFIG_SYS_POST_COPROC
+ {
+ "Coprocessors communication test",
+ "coproc_com",
+ "This test checks communication with coprocessors.",
+ POST_RAM | POST_ALWAYS | POST_CRITICAL,
+ &pdm360ng_coprocessor_post_test,
+ NULL,
+ NULL,
+ CONFIG_SYS_POST_COPROC
+ }
+#endif
};
unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
