Similar to Clearfog rev 2.1, GPIO 19 also used to reset onboard ethernet
PHY.
Signed-off-by: Aditya Prayoga <adi...@kobol.io>
---
v2:
* Use generic gpio_* API (Baruch Siach)
---
board/kobol/helios4/helios4.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/board/kobol/helios4/helios4.c b/board/kobol/helios4/helios4.c
index 37c46a5..e535d7b 100644
--- a/board/kobol/helios4/helios4.c
+++ b/board/kobol/helios4/helios4.c
@@ -8,6 +8,7 @@
#include <i2c.h>
#include <miiphy.h>
#include <netdev.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
@@ -111,9 +112,39 @@ int board_early_init_f(void)
int board_init(void)
{
+ struct udevice *gpio0;
+ struct gpio_desc phy_reset;
+ int ret;
+
/* Address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+ ret = uclass_get_device_by_name(UCLASS_GPIO,
+ "gpio@18100",
+ &gpio0);
+ if (ret < 0) {
+ printf("Failed to find gpio@18100 node.\n");
+ return ret;
+ }
+
+ phy_reset.dev = gpio0;
+
+ /* MPP19 controls the uSOM onboard phy reset */
+ phy_reset.offset = 19;
+
+ ret = dm_gpio_request(&phy_reset, "phy-reset");
+ if (ret)
+ return ret;
+
+ dm_gpio_set_dir_flags(&phy_reset,
+ GPIOD_IS_OUT |
+ GPIOD_ACTIVE_LOW |
+ GPIOD_IS_OUT_ACTIVE);
+
+ mdelay(10);
+ dm_gpio_set_value(&phy_reset, 0);
+ mdelay(10);
+
return 0;
}
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
