On 11/23/2018 10:51 AM, Chee, Tien Fong wrote:
> On Wed, 2018-11-21 at 15:19 +0100, Marek Vasut wrote:
>> On 11/21/2018 11:41 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee <tien.fong.c...@intel.com>
>>>
>>> Add support for loading FPGA bitstream to get DDR up running before
>>> U-Boot is loaded into DDR. Boot device initialization, generic
>>> firmware
>>> loader and SPL FAT support are required for this whole mechanism to
>>> work.
>>>
>>> Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
>>> ---
>>> arch/arm/mach-socfpga/spl_a10.c | 49
>>> ++++++++++++++++++++++++++++++++++++++-
>>> common/spl/spl_mmc.c | 2 +-
>>> include/mmc.h | 1 +
>>> 3 files changed, 50 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-
>>> socfpga/spl_a10.c
>>> index 3ea64f7..67a4fac 100644
>>> --- a/arch/arm/mach-socfpga/spl_a10.c
>>> +++ b/arch/arm/mach-socfpga/spl_a10.c
>>> @@ -1,6 +1,6 @@
>>> // SPDX-License-Identifier: GPL-2.0+
>>> /*
>>> - * Copyright (C) 2012 Altera Corporation <www.altera.com>
>>> + * Copyright (C) 2012-2018 Altera Corporation <www.altera.com>
>>> */
>>>
>>> #include <common.h>
>>> @@ -23,6 +23,10 @@
>>> #include <fdtdec.h>
>>> #include <watchdog.h>
>>> #include <asm/arch/pinmux.h>
>>> +#include <asm/arch/fpga_manager.h>
>>> +#include <mmc.h>
>>> +
>>> +#define RBF 0
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> @@ -73,6 +77,49 @@ void spl_board_init(void)
>>> WATCHDOG_RESET();
>>>
>>> arch_early_init_r();
>>> +
>>> + /* If the full FPGA is already loaded, ie.from EPCQ,
>>> config fpga pins */
>>> + if (is_fpgamgr_user_mode()) {
>>> + config_pins(gd->fdt_blob, "shared");
>>> + config_pins(gd->fdt_blob, "fpga");
>>> + } else if (!is_fpgamgr_early_user_mode()) {
>>> + /* Program IOSSM(early IO release) or full FPGA */
>>> + fpga_fs_info fpga_fsinfo;
>>> + char buf[16 * 1024] __aligned(ARCH_DMA_MINALIGN);
>>> + struct spl_boot_device bootdev;
>>> + int len = 0;
>>> +
>>> + bootdev.boot_device = spl_boot_device();
>>> +
>>> + /* Init MMC driver before reading FPGA bitstream
>>> from flash */
>>> + if (bootdev.boot_device == BOOT_DEVICE_MMC1) {
>>> + struct mmc *mmc = NULL;
>>> + int err = 0;
>>> +
>>> + err = spl_mmc_find_device(&mmc,
>>> bootdev.boot_device);
>>> + if (err)
>>> + return;
>>> +
>>> + err = mmc_init(mmc);
>> I thought all this backend specific stuff would be hidden in the FW
>> loader.
> The backend supported by FW loader is up to generic file system
> interface layer. flash driver init is expected done by SPL/U-Boot
> common init sequence framwork or user. Unfortunately, fw loader need to
> access flash before init sequence.
This is actually accessing eMMC though , not flash . If we need this
huge boilerplate code every time we use the FW loader, than the FW
loader needs fixing. I can understand the spl_boot_device() being
outside of the FW loader, but not the mmc_init() and co.
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
