Hi Simon, On 11/19/2018 9:23 PM, Simon Glass wrote: > This board has not been converted to CONFIG_DM_BLK by the deadline. > Remove it. > > Signed-off-by: Simon Glass <s...@chromium.org>
Not sure if this is by mistake, but I see CONFIG_BLK is enabled in both the configs. Am I missing something? ➜ u-boot git:(master) make am65x_evm_r5_defconfig;cat .config | grep BLK # # configuration written to .config # CONFIG_BLK=y CONFIG_SPL_BLK=y ➜ u-boot git:(master) make am65x_evm_a53_defconfig;cat .config | grep BLK # # configuration written to .config # CONFIG_BLK=y CONFIG_SPL_BLK=y Thanks and regards, Lokesh > --- > > arch/arm/mach-k3/Kconfig | 1 - > board/ti/am65x/Kconfig | 52 -------- > board/ti/am65x/MAINTAINERS | 7 -- > board/ti/am65x/Makefile | 8 -- > board/ti/am65x/README | 211 -------------------------------- > board/ti/am65x/evm.c | 68 ---------- > configs/am65x_evm_a53_defconfig | 71 ----------- > configs/am65x_evm_r5_defconfig | 87 ------------- > include/configs/am65x_evm.h | 75 ------------ > 9 files changed, 580 deletions(-) > delete mode 100644 board/ti/am65x/Kconfig > delete mode 100644 board/ti/am65x/MAINTAINERS > delete mode 100644 board/ti/am65x/Makefile > delete mode 100644 board/ti/am65x/README > delete mode 100644 board/ti/am65x/evm.c > delete mode 100644 configs/am65x_evm_a53_defconfig > delete mode 100644 configs/am65x_evm_r5_defconfig > delete mode 100644 include/configs/am65x_evm.h > > diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig > index e677a2e01b8..6b55b3c8c1f 100644 > --- a/arch/arm/mach-k3/Kconfig > +++ b/arch/arm/mach-k3/Kconfig > @@ -65,5 +65,4 @@ config SYS_K3_SPL_ATF > Enabling this will try to start Cortex-A (typically with ATF) > after SPL from R5. > > -source "board/ti/am65x/Kconfig" > endif > diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig > deleted file mode 100644 > index d4b36dbb42f..00000000000 > --- a/board/ti/am65x/Kconfig > +++ /dev/null > @@ -1,52 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ > -# Lokesh Vutla <lokeshvu...@ti.com> > - > -choice > - prompt "K3 AM65 based boards" > - optional > - > -config TARGET_AM654_A53_EVM > - bool "TI K3 based AM654 EVM running on A53" > - select ARM64 > - select SOC_K3_AM6 > - > -config TARGET_AM654_R5_EVM > - bool "TI K3 based AM654 EVM running on R5" > - select CPU_V7R > - select SYS_THUMB_BUILD > - select SOC_K3_AM6 > - select K3_AM654_DDRSS > - imply SYS_K3_SPL_ATF > - > -endchoice > - > -if TARGET_AM654_A53_EVM > - > -config SYS_BOARD > - default "am65x" > - > -config SYS_VENDOR > - default "ti" > - > -config SYS_CONFIG_NAME > - default "am65x_evm" > - > -endif > - > -if TARGET_AM654_R5_EVM > - > -config SYS_BOARD > - default "am65x" > - > -config SYS_VENDOR > - default "ti" > - > -config SYS_CONFIG_NAME > - default "am65x_evm" > - > -config SPL_LDSCRIPT > - default "arch/arm/mach-omap2/u-boot-spl.lds" > - > -endif > diff --git a/board/ti/am65x/MAINTAINERS b/board/ti/am65x/MAINTAINERS > deleted file mode 100644 > index 7c52e7599e0..00000000000 > --- a/board/ti/am65x/MAINTAINERS > +++ /dev/null > @@ -1,7 +0,0 @@ > -AM65x BOARD > -M: Lokesh Vutla <lokeshvu...@ti.com> > -S: Maintained > -F: board/ti/am65x/ > -F: include/configs/am65x_evm.h > -F: configs/am65x_evm_a53_defconfig > -F: configs/am65x_evm_r5_defconfig > diff --git a/board/ti/am65x/Makefile b/board/ti/am65x/Makefile > deleted file mode 100644 > index 94dddfcc4a5..00000000000 > --- a/board/ti/am65x/Makefile > +++ /dev/null > @@ -1,8 +0,0 @@ > -# > -# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ > -# Lokesh Vutla <lokeshvu...@ti.com> > -# > -# SPDX-License-Identifier: GPL-2.0+ > -# > - > -obj-y := evm.o > diff --git a/board/ti/am65x/README b/board/ti/am65x/README > deleted file mode 100644 > index 0b82bd557b5..00000000000 > --- a/board/ti/am65x/README > +++ /dev/null > @@ -1,211 +0,0 @@ > -Introduction: > -------------- > -The AM65x family of SoCs is the first device family from K3 Multicore > -SoC architecture, targeted for broad market and industrial control with > -aim to meet the complex processing needs of modern embedded products. > - > -The device is built over three domains, each containing specific processing > -cores, voltage domains and peripherals: > -1. Wake-up (WKUP) domain: > - - Device Management and Security Controller (DMSC) > -2. Microcontroller (MCU) domain: > - - Dual Core ARM Cortex-R5F processor > -3. MAIN domain: > - - Quad core 64-bit ARM Cortex-A53 > - > -More info can be found in TRM: http://www.ti.com/lit/pdf/spruid7 > - > -Boot Flow: > ----------- > -On AM65x family devices, ROM supports boot only via MCU(R5). This means that > -bootloader has to run on R5 core. In order to meet this constraint, and for > -the following reasons the boot flow is designed as mentioned: > -1. Need to move away from R5 asap, so that we want to start *any* > -firmware on the r5 cores like.... autosar can be loaded to receive CAN > -response and other safety operations to be started. This operation is > -very time critical and is applicable for all automotive use cases. > -2. U-Boot on A53 should start other remotecores for various > -applications. This should happen before running Linux. > -3. In production boot flow, we might not like to use full u-boot, > -instead use Flacon boot flow to reduce boot time. > - > -+------------------------------------------------------------------------+ > -| DMSC | R5 | A53 | > -+------------------------------------------------------------------------+ > -| +--------+ | | | > -| | Reset | | | | > -| +--------+ | | | > -| : | | | > -| +--------+ | +-----------+ | | > -| | *ROM* |----------|-->| Reset rls | | | > -| +--------+ | +-----------+ | | > -| | | | : | | > -| | ROM | | : | | > -| |services| | : | | > -| | | | +-------------+ | | > -| | | | | *R5 ROM* | | | > -| | | | +-------------+ | | > -| | |<---------|---|Load and auth| | | > -| | | | | tiboot3.bin | | | > -| | | | +-------------+ | | > -| | | | : | | > -| | | | : | | > -| | | | : | | > -| | | | +-------------+ | | > -| | | | | *R5 SPL* | | | > -| | | | +-------------+ | | > -| | | | | Load | | | > -| | | | | sysfw.itb | | | > -| | Start | | +-------------+ | | > -| | System |<---------|---| Start | | | > -| |Firmware| | | SYSFW | | | > -| +--------+ | +-------------+ | | > -| : | | | | | > -| +---------+ | | Load | | | > -| | *SYSFW* | | | system | | | > -| +---------+ | | Config data | | | > -| | |<--------|---| | | | > -| | | | +-------------+ | | > -| | | | | | | | > -| | | | | DDR | | | > -| | | | | config | | | > -| | | | +-------------+ | | > -| | | | | | | | > -| | |<--------|---| Start A53 | | | > -| | | | | and Reset | | | > -| | | | +-------------+ | | > -| | | | | +-----------+ | > -| | |---------|-----------------------|---->| Reset rls | | > -| | | | | +-----------+ | > -| | DMSC | | | : | > -| |Services | | | +-----------+ | > -| | |<--------|-----------------------|---->|*ATF/OPTEE*| | > -| | | | | +-----------+ | > -| | | | | : | > -| | | | | +-----------+ | > -| | |<--------|-----------------------|---->| *A53 SPL* | | > -| | | | | +-----------+ | > -| | | | | | Load | | > -| | | | | | u-boot.img| | > -| | | | | +-----------+ | > -| | | | | : | > -| | | | | +-----------+ | > -| | |<--------|-----------------------|---->| *U-Boot* | | > -| | | | | +-----------+ | > -| | | | | | prompt | | > -| | | | | +-----------+ | > -| +---------+ | | | > -| | | | > -+------------------------------------------------------------------------+ > - > -- Here DMSC acts as master and provides all the critical services. R5/A53 > -requests DMSC to get these services done as shown in the above diagram. > - > -Sources: > --------- > -1. SYSFW: > - Tree: git://git.ti.com/processor-firmware/system-firmware-image-gen.git > - Branch: master > - > -2. ATF: > - Tree: https://github.com/ARM-software/arm-trusted-firmware.git > - Branch: master > - > -3. OPTEE: > - Tree: https://github.com/OP-TEE/optee_os.git > - Branch: master > - > -4. U-Boot: > - Tree: http://git.denx.de/u-boot.git > - Branch: master > - > -Build procedure: > ----------------- > -1. SYSFW: > -$ make CROSS_COMPILE=arm-linux-gnueabihf- > - > -2. ATF: > -$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 > TARGET_BOARD=generic SPD=opteed > - > -3. OPTEE: > -$ make PLATFORM=k3-am65x CFG_ARM64_core=y > - > -4. U-Boot: > - > -4.1. R5: > -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig > O=/tmp/r5 > -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 > - > -4.2. A53: > -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig > O=/tmp/a53 > -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF > dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS > dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53 > - > -Target Images > --------------- > -Copy the below images to an SD card and boot: > -- sysfw.itb from step 1 > -- tiboot3.bin from step 4.1 > -- tispl.bin, u-boot.img from 4.2 > - > -Image formats: > --------------- > - > -- tiboot3.bin: > - +-----------------------+ > - | X.509 | > - | Certificate | > - | +-------------------+ | > - | | | | > - | | R5 | | > - | | u-boot-spl.bin | | > - | | | | > - | +-------------------+ | > - | | | | > - | | FIT header | | > - | | +---------------+ | | > - | | | | | | > - | | | DTB 1...N | | | > - | | +---------------+ | | > - | +-------------------+ | > - +-----------------------+ > - > -- tispl.bin > - +-----------------------+ > - | | > - | FIT HEADER | > - | +-------------------+ | > - | | | | > - | | A53 ATF | | > - | +-------------------+ | > - | | | | > - | | A53 OPTEE | | > - | +-------------------+ | > - | | | | > - | | A53 SPL | | > - | +-------------------+ | > - | | | | > - | | SPL DTB 1...N | | > - | +-------------------+ | > - +-----------------------+ > - > -- sysfw.itb > - +-----------------------+ > - | | > - | FIT HEADER | > - | +-------------------+ | > - | | | | > - | | sysfw.bin | | > - | +-------------------+ | > - | | | | > - | | board config | | > - | +-------------------+ | > - | | | | > - | | PM config | | > - | +-------------------+ | > - | | | | > - | | RM config | | > - | +-------------------+ | > - | | | | > - | | Secure config | | > - | +-------------------+ | > - +-----------------------+ > diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c > deleted file mode 100644 > index 784b2b0191d..00000000000 > --- a/board/ti/am65x/evm.c > +++ /dev/null > @@ -1,68 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0+ > -/* > - * Board specific initialization for AM654 EVM > - * > - * Copyright (C) 2017-2018 Texas Instruments Incorporated - > http://www.ti.com/ > - * Lokesh Vutla <lokeshvu...@ti.com> > - * > - */ > - > -#include <common.h> > -#include <asm/io.h> > -#include <spl.h> > - > -DECLARE_GLOBAL_DATA_PTR; > - > -int board_init(void) > -{ > - return 0; > -} > - > -int dram_init(void) > -{ > -#ifdef CONFIG_PHYS_64BIT > - gd->ram_size = 0x100000000; > -#else > - gd->ram_size = 0x80000000; > -#endif > - > - return 0; > -} > - > -ulong board_get_usable_ram_top(ulong total_size) > -{ > -#ifdef CONFIG_PHYS_64BIT > - /* Limit RAM used by U-Boot to the DDR low region */ > - if (gd->ram_top > 0x100000000) > - return 0x100000000; > -#endif > - > - return gd->ram_top; > -} > - > -int dram_init_banksize(void) > -{ > - /* Bank 0 declares the memory available in the DDR low region */ > - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; > - gd->bd->bi_dram[0].size = 0x80000000; > - > -#ifdef CONFIG_PHYS_64BIT > - /* Bank 1 declares the memory available in the DDR high region */ > - gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1; > - gd->bd->bi_dram[1].size = 0x80000000; > -#endif > - > - return 0; > -} > - > -#ifdef CONFIG_SPL_LOAD_FIT > -int board_fit_config_name_match(const char *name) > -{ > -#ifdef CONFIG_TARGET_AM654_A53_EVM > - if (!strcmp(name, "k3-am654-base-board")) > - return 0; > -#endif > - > - return -1; > -} > -#endif > diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig > deleted file mode 100644 > index a17cf7cb504..00000000000 > --- a/configs/am65x_evm_a53_defconfig > +++ /dev/null > @@ -1,71 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_K3=y > -CONFIG_SPL_LIBCOMMON_SUPPORT=y > -CONFIG_SPL_LIBGENERIC_SUPPORT=y > -CONFIG_SYS_MALLOC_F_LEN=0x2000 > -CONFIG_SOC_K3_AM6=y > -CONFIG_TARGET_AM654_A53_EVM=y > -CONFIG_SPL_MMC_SUPPORT=y > -CONFIG_SPL_SERIAL_SUPPORT=y > -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > -CONFIG_SPL_STACK_R_ADDR=0x82000000 > -CONFIG_SPL_FAT_SUPPORT=y > -CONFIG_SPL_LIBDISK_SUPPORT=y > -CONFIG_DISTRO_DEFAULTS=y > -CONFIG_NR_DRAM_BANKS=2 > -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > -CONFIG_SPL_LOAD_FIT=y > -CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run > get_kern_${boot}; run get_fdt_${boot}; run run_kern" > -# CONFIG_DISPLAY_CPUINFO is not set > -CONFIG_SPL_SYS_MALLOC_SIMPLE=y > -CONFIG_SPL_STACK_R=y > -CONFIG_SPL_SEPARATE_BSS=y > -CONFIG_SPL_I2C_SUPPORT=y > -CONFIG_SPL_DM_MAILBOX=y > -CONFIG_SPL_DM_RESET=y > -CONFIG_SPL_POWER_DOMAIN=y > -CONFIG_SPL_REMOTEPROC=y > -CONFIG_SPL_YMODEM_SUPPORT=y > -CONFIG_CMD_ASKENV=y > -# CONFIG_CMD_FLASH is not set > -CONFIG_CMD_MMC=y > -CONFIG_CMD_REMOTEPROC=y > -# CONFIG_CMD_SETEXPR is not set > -CONFIG_CMD_TIME=y > -# CONFIG_ISO_PARTITION is not set > -# CONFIG_EFI_PARTITION is not set > -CONFIG_OF_CONTROL=y > -CONFIG_SPL_OF_CONTROL=y > -CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board" > -CONFIG_SPL_MULTI_DTB_FIT=y > -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y > -CONFIG_ENV_IS_IN_FAT=y > -CONFIG_ENV_FAT_INTERFACE="mmc" > -CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" > -CONFIG_DM=y > -CONFIG_SPL_DM=y > -CONFIG_SPL_DM_SEQ_ALIAS=y > -CONFIG_CLK=y > -CONFIG_SPL_CLK=y > -CONFIG_CLK_TI_SCI=y > -CONFIG_TI_SCI_PROTOCOL=y > -CONFIG_DM_MAILBOX=y > -CONFIG_K3_SEC_PROXY=y > -CONFIG_MISC=y > -CONFIG_DM_MMC=y > -CONFIG_MMC_SDHCI=y > -CONFIG_MMC_SDHCI_K3_ARASAN=y > -CONFIG_PINCTRL=y > -# CONFIG_PINCTRL_GENERIC is not set > -CONFIG_SPL_PINCTRL=y > -# CONFIG_SPL_PINCTRL_GENERIC is not set > -CONFIG_PINCTRL_SINGLE=y > -CONFIG_POWER_DOMAIN=y > -CONFIG_TI_SCI_POWER_DOMAIN=y > -CONFIG_K3_SYSTEM_CONTROLLER=y > -CONFIG_REMOTEPROC_K3=y > -CONFIG_DM_RESET=y > -CONFIG_RESET_TI_SCI=y > -CONFIG_DM_SERIAL=y > -CONFIG_SYSRESET=y > -CONFIG_SYSRESET_TI_SCI=y > diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig > deleted file mode 100644 > index 237b9e8229b..00000000000 > --- a/configs/am65x_evm_r5_defconfig > +++ /dev/null > @@ -1,87 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_K3=y > -CONFIG_SPL_GPIO_SUPPORT=y > -CONFIG_SPL_LIBCOMMON_SUPPORT=y > -CONFIG_SPL_LIBGENERIC_SUPPORT=y > -CONFIG_SYS_MALLOC_F_LEN=0x2000 > -CONFIG_SOC_K3_AM6=y > -CONFIG_TARGET_AM654_R5_EVM=y > -CONFIG_SPL_MMC_SUPPORT=y > -CONFIG_SPL_SERIAL_SUPPORT=y > -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > -CONFIG_SPL_STACK_R_ADDR=0x82000000 > -CONFIG_SPL_FAT_SUPPORT=y > -CONFIG_SPL_LIBDISK_SUPPORT=y > -CONFIG_NR_DRAM_BANKS=2 > -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > -CONFIG_SPL_LOAD_FIT=y > -CONFIG_USE_BOOTCOMMAND=y > -# CONFIG_DISPLAY_CPUINFO is not set > -CONFIG_SPL_SYS_MALLOC_SIMPLE=y > -CONFIG_SPL_STACK_R=y > -CONFIG_SPL_SEPARATE_BSS=y > -CONFIG_SPL_I2C_SUPPORT=y > -CONFIG_SPL_DM_MAILBOX=y > -CONFIG_SPL_DM_RESET=y > -CONFIG_SPL_POWER_SUPPORT=y > -CONFIG_SPL_POWER_DOMAIN=y > -CONFIG_SPL_RAM_SUPPORT=y > -CONFIG_SPL_RAM_DEVICE=y > -CONFIG_SPL_REMOTEPROC=y > -CONFIG_SPL_YMODEM_SUPPORT=y > -CONFIG_HUSH_PARSER=y > -CONFIG_CMD_BOOTZ=y > -CONFIG_CMD_ASKENV=y > -# CONFIG_CMD_FLASH is not set > -CONFIG_CMD_MMC=y > -CONFIG_CMD_REMOTEPROC=y > -# CONFIG_CMD_SETEXPR is not set > -CONFIG_CMD_TIME=y > -CONFIG_CMD_FAT=y > -CONFIG_OF_CONTROL=y > -CONFIG_SPL_OF_CONTROL=y > -CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board" > -CONFIG_SPL_MULTI_DTB_FIT=y > -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y > -CONFIG_ENV_IS_IN_FAT=y > -CONFIG_ENV_FAT_INTERFACE="mmc" > -CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" > -CONFIG_DM=y > -CONFIG_SPL_DM=y > -CONFIG_SPL_DM_SEQ_ALIAS=y > -CONFIG_SPL_OF_TRANSLATE=y > -CONFIG_CLK=y > -CONFIG_SPL_CLK=y > -CONFIG_CLK_TI_SCI=y > -CONFIG_TI_SCI_PROTOCOL=y > -CONFIG_DM_GPIO=y > -CONFIG_DA8XX_GPIO=y > -CONFIG_DM_MAILBOX=y > -CONFIG_K3_SEC_PROXY=y > -CONFIG_MISC=y > -CONFIG_DM_MMC=y > -CONFIG_MMC_SDHCI=y > -CONFIG_MMC_SDHCI_K3_ARASAN=y > -CONFIG_PINCTRL=y > -# CONFIG_PINCTRL_GENERIC is not set > -CONFIG_SPL_PINCTRL=y > -# CONFIG_SPL_PINCTRL_GENERIC is not set > -CONFIG_PINCTRL_SINGLE=y > -CONFIG_POWER_DOMAIN=y > -CONFIG_TI_SCI_POWER_DOMAIN=y > -CONFIG_DM_REGULATOR=y > -CONFIG_SPL_DM_REGULATOR=y > -CONFIG_DM_REGULATOR_GPIO=y > -CONFIG_SPL_DM_REGULATOR_GPIO=y > -CONFIG_RAM=y > -CONFIG_SPL_RAM=y > -CONFIG_K3_SYSTEM_CONTROLLER=y > -CONFIG_REMOTEPROC_K3=y > -CONFIG_DM_RESET=y > -CONFIG_RESET_TI_SCI=y > -CONFIG_DM_SERIAL=y > -CONFIG_SYSRESET=y > -CONFIG_SYSRESET_TI_SCI=y > -CONFIG_TIMER=y > -CONFIG_SPL_TIMER=y > -CONFIG_OMAP_TIMER=y > diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h > deleted file mode 100644 > index 484c5ef2fe1..00000000000 > --- a/include/configs/am65x_evm.h > +++ /dev/null > @@ -1,75 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * Configuration header file for K3 AM654 EVM > - * > - * Copyright (C) 2017-2018 Texas Instruments Incorporated - > http://www.ti.com/ > - * Lokesh Vutla <lokeshvu...@ti.com> > - */ > - > -#ifndef __CONFIG_AM654_EVM_H > -#define __CONFIG_AM654_EVM_H > - > -#include <linux/sizes.h> > -#include <config_distro_bootcmd.h> > -#include <environment/ti/mmc.h> > - > -#define CONFIG_ENV_SIZE (128 << 10) > - > -/* DDR Configuration */ > -#define CONFIG_SYS_SDRAM_BASE1 0x880000000 > - > -/* SPL Loader Configuration */ > -#ifdef CONFIG_TARGET_AM654_A53_EVM > -#define CONFIG_SPL_TEXT_BASE 0x80080000 > -#else > -#define CONFIG_SPL_TEXT_BASE 0x41c00000 > -#endif > - > -#ifdef CONFIG_SYS_K3_SPL_ATF > -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" > -#endif > - > -#define CONFIG_SKIP_LOWLEVEL_INIT > - > -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE > -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ > - CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4) > - > -/* U-Boot general configuration */ > -#define EXTRA_ENV_AM65X_BOARD_SETTINGS > \ > - "findfdt=" \ > - "if test $board_name = am65x; then " \ > - "setenv name_fdt k3-am654-base-board.dtb; " \ > - "else if test $name_fdt = undefined; then " \ > - "echo WARNING: Could not determine device tree to use;"\ > - "fi; fi; " \ > - "setenv fdtfile ${name_fdt}\0" \ > - "loadaddr=0x80080000\0" \ > - "fdtaddr=0x82000000\0" \ > - "name_kern=Image\0" \ > - "console=ttyS2,115200n8\0" \ > - "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \ > - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" > - > -/* U-Boot MMC-specific configuration */ > -#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \ > - "boot=mmc\0" \ > - "mmcdev=1\0" \ > - "bootpart=1:2\0" \ > - "bootdir=/boot\0" \ > - "rd_spec=-\0" \ > - "init_mmc=run args_all args_mmc\0" \ > - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ > - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ > - "${bootdir}/${name_kern}\0" > - > -/* Incorporate settings into the U-Boot environment */ > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - DEFAULT_MMC_TI_ARGS \ > - EXTRA_ENV_AM65X_BOARD_SETTINGS \ > - EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC > - > -/* Now for the remaining common defines */ > -#include <configs/ti_armv7_common.h> > - > -#endif /* __CONFIG_AM654_EVM_H */ > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
