This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/mach-kirkwood/Kconfig | 1 -
board/Seagate/nas220/Kconfig | 12 ---
board/Seagate/nas220/MAINTAINERS | 6 --
board/Seagate/nas220/Makefile | 7 --
board/Seagate/nas220/kwbimage.cfg | 151 ------------------------------
board/Seagate/nas220/nas220.c | 118 -----------------------
configs/nas220_defconfig | 42 ---------
include/configs/nas220.h | 112 ----------------------
8 files changed, 449 deletions(-)
delete mode 100644 board/Seagate/nas220/Kconfig
delete mode 100644 board/Seagate/nas220/MAINTAINERS
delete mode 100644 board/Seagate/nas220/Makefile
delete mode 100644 board/Seagate/nas220/kwbimage.cfg
delete mode 100644 board/Seagate/nas220/nas220.c
delete mode 100644 configs/nas220_defconfig
delete mode 100644 include/configs/nas220.h
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 63fd39881ed..d4afdaccd3b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -82,7 +82,6 @@ source "board/LaCie/netspace_v2/Kconfig"
source "board/raidsonic/ib62x0/Kconfig"
source "board/Seagate/dockstar/Kconfig"
source "board/Seagate/goflexhome/Kconfig"
-source "board/Seagate/nas220/Kconfig"
source "board/zyxel/nsa310s/Kconfig"
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
diff --git a/board/Seagate/nas220/Kconfig b/board/Seagate/nas220/Kconfig
deleted file mode 100644
index 0fa529cde11..00000000000
--- a/board/Seagate/nas220/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_NAS220
-
-config SYS_BOARD
- default "nas220"
-
-config SYS_VENDOR
- default "Seagate"
-
-config SYS_CONFIG_NAME
- default "nas220"
-
-endif
diff --git a/board/Seagate/nas220/MAINTAINERS b/board/Seagate/nas220/MAINTAINERS
deleted file mode 100644
index f2df7ea64f2..00000000000
--- a/board/Seagate/nas220/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-NAS220 BOARD
-M: Evgeni Dobrev <evg...@studio-punkt.com>
-S: Maintained
-F: board/Seagate/nas220/
-F: include/configs/nas220.h
-F: configs/nas220_defconfig
diff --git a/board/Seagate/nas220/Makefile b/board/Seagate/nas220/Makefile
deleted file mode 100644
index 9de73e6f5ea..00000000000
--- a/board/Seagate/nas220/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Copyright (C) 2014 Evgeni Dobrev <evg...@studio-punkt.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := nas220.o
diff --git a/board/Seagate/nas220/kwbimage.cfg
b/board/Seagate/nas220/kwbimage.cfg
deleted file mode 100644
index dbbfb9c0204..00000000000
--- a/board/Seagate/nas220/kwbimage.cfg
+++ /dev/null
@@ -1,151 +0,0 @@
-#
-# Copyright (C) 2014 Evgeni Dobrev <evg...@studio-punkt.com>
-#
-# Based on sheevaplug/kwbimage.cfg originally written by
-# Prafulla Wadaskar <prafu...@marvell.com>
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Refer doc/README.kwbimage for more details about how-to configure
-# and create kirkwood boot image
-#
-
-# Boot Media configurations
-BOOT_FROM nand
-NAND_ECC_MODE default
-NAND_PAGE_SIZE 0x0200
-
-# SOC registers configuration using bootrom header extension
-# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
-
-# Configure RGMII-0 interface pad voltage to 1.8V
-DATA 0xFFD100e0 0x1b1b1b9b
-
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-DATA 0xFFD01400 0x43000618 # DDR Configuration register
-# bit13-0: 0xa00 (2560 DDR2 clks refresh rate)
-# bit23-14: zero
-# bit24: 1= enable exit self refresh mode on DDR access
-# bit25: 1 required
-# bit29-26: zero
-# bit31-30: 01
-
-DATA 0xFFD01404 0x35143000 # DDR Controller Control Low
-# bit 4: 0=addr/cmd in smame cycle
-# bit 5: 0=clk is driven during self refresh, we don't care for APX
-# bit 6: 0=use recommended falling edge of clk for addr/cmd
-# bit14: 0=input buffer always powered up
-# bit18: 1=cpu lock transaction enabled
-# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
-# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered
DIMM
-# bit30-28: 3 required
-# bit31: 0=no additional STARTBURST delay
-
-DATA 0xFFD01408 0x11012227 # DDR Timing (Low) (active cycles value +1)
-# bit7-4: TRCD
-# bit11- 8: TRP
-# bit15-12: TWR
-# bit19-16: TWTR
-# bit20: TRAS msb
-# bit23-21: 0x0
-# bit27-24: TRRD
-# bit31-28: TRTP
-
-DATA 0xFFD0140C 0x00000819 # DDR Timing (High)
-# bit6-0: TRFC
-# bit8-7: TR2R
-# bit10-9: TR2W
-# bit12-11: TW2W
-# bit31-13: zero required
-
-
-DATA 0xFFD01410 0x0000000d # DDR Address Control
-# bit1-0: 00, Cs0width=x8
-# bit3-2: 11, Cs0size=1Gb
-# bit5-4: 00, Cs1width=nonexistent
-# bit7-6: 00, Cs1size =nonexistent
-# bit9-8: 00, Cs2width=nonexistent
-# bit11-10: 00, Cs2size =nonexistent
-# bit13-12: 00, Cs3width=nonexistent
-# bit15-14: 00, Cs3size =nonexistent
-# bit16: 0, Cs0AddrSel
-# bit17: 0, Cs1AddrSel
-# bit18: 0, Cs2AddrSel
-# bit19: 0, Cs3AddrSel
-# bit31-20: 0 required
-
-DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
-# bit0: 0, OpenPage enabled
-# bit31-1: 0 required
-
-DATA 0xFFD01418 0x00000000 # DDR Operation
-# bit3-0: 0x0, DDR cmd
-# bit31-4: 0 required
-
-DATA 0xFFD0141C 0x00000632 # DDR Mode
-# bit2-0: 2, BurstLen=2 required
-# bit3: 0, BurstType=0 required
-# bit6-4: 4, CL=5
-# bit7: 0, TestMode=0 normal
-# bit8: 0, DLL reset=0 normal
-# bit11-9: 6, auto-precharge write recovery ????????????
-# bit12: 0, PD must be zero
-# bit31-13: 0 required
-
-
-DATA 0xFFD01420 0x00000040 # DDR Extended Mode
-# bit0: 0, DDR DLL enabled
-# bit1: 0, DDR drive strenght normal
-# bit2: 0, DDR ODT control lsd (disabled)
-# bit5-3: 000, required
-# bit6: 1, DDR ODT control msb, (disabled)
-# bit9-7: 000, required
-# bit10: 0, differential DQS enabled
-# bit11: 0, required
-# bit12: 0, DDR output buffer enabled
-# bit31-13: 0 required
-
-DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
-# bit2-0: 111, required
-# bit3 : 1 , MBUS Burst Chop disabled
-# bit6-4: 111, required
-# bit7 : 0
-# bit8 : 0
-# bit9 : 0 , no half clock cycle addition to dataout
-# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
-# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
-# bit15-12: 1111 required
-# bit31-16: 0 required
-
-DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
-# bit0: 1, Window enabled
-# bit1: 0, Write Protect disabled
-# bit3-2: 00, CS0 hit selected
-# bit23-4: ones, required
-# bit31-24: 0x07, Size (i.e. 128MB)
-
-DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0
-
-DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
-
-DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
-DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
-
-DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
-DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
-# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
-# bit3-2: 01, ODT1 active NEVER!
-# bit31-4: zero, required
-
-DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
-
-DATA 0xFFD01480 0x00000001 # DDR Initialization Control
-#bit0=1, enable DDR init upon this register write
-
-DATA 0xffd01620 0x00465000
-
-# End of Header extension
-DATA 0x0 0x0
-
diff --git a/board/Seagate/nas220/nas220.c b/board/Seagate/nas220/nas220.c
deleted file mode 100644
index 1e6c43b1fab..00000000000
--- a/board/Seagate/nas220/nas220.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2014 Evgeni Dobrev <evg...@studio-punkt.com>
- *
- * Based on sheevaplug.c originally written by
- * Prafulla Wadaskar <prafu...@marvell.com>
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <asm/mach-types.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /*
- * default gpio configuration
- */
- mvebu_config_gpio(NAS220_GE_OE_VAL_LOW, NAS220_GE_OE_VAL_HIGH,
- NAS220_GE_OE_LOW, NAS220_GE_OE_HIGH);
-
- /* Multi-Purpose Pins Functionality configuration */
- static const u32 kwmpp_config[] = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_SPI_SCn,
- MPP8_TW_SDA,
- MPP9_TW_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO,
- MPP13_GPIO,
- MPP14_GPIO,
- MPP15_SATA0_ACTn,
- MPP16_SATA1_ACTn,
- MPP17_SATA0_PRESENTn,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_GPIO,
- MPP21_GPIO,
- MPP22_GPIO,
- MPP23_GPIO,
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO,
- MPP27_GPIO,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPIO,
- MPP34_GPIO,
- MPP35_GPIO,
- 0
- };
- kirkwood_mpp_conf(kwmpp_config, NULL);
- return 0;
-}
-
-int board_init(void)
-{
- /*
- * arch number of board
- */
- gd->bd->bi_arch_number = MACH_TYPE_RD88F6192_NAS;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
- u16 reg;
- u16 devadr;
- char *name = "egiga0";
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
- printf("Err..%s could not read PHY dev address\n", __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- miiphy_reset(name, devadr);
-
- printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
deleted file mode 100644
index 6bd308bb826..00000000000
--- a/configs/nas220_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-CONFIG_KIRKWOOD=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_TARGET_NAS220=y
-CONFIG_IDENT_STRING="\nNAS 220"
-CONFIG_NR_DRAM_BANKS=2
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="nas220> "
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
-# CONFIG_MMC is not set
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_MV=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
diff --git a/include/configs/nas220.h b/include/configs/nas220.h
deleted file mode 100644
index bdfa42fd30c..00000000000
--- a/include/configs/nas220.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 Evgeni Dobrev <evg...@studio-punkt.com>
- *
- * based on work from:
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
- */
-
-#ifndef _CONFIG_NAS220_H
-#define _CONFIG_NAS220_H
-
-/*
- * Machine type ID
- */
-#define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion
*/
-#define CONFIG_KW88F6192 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
-/* power-on led, regulator, sata0, sata1 */
-#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
-#define NAS220_GE_OE_VAL_HIGH (0)
-#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
-#define NAS220_GE_OE_HIGH (~(0))
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-/*
- * Commands configuration
- */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-/*
- * Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#endif
-
-#define CONFIG_ENV_SIZE 0x10000
-#define CONFIG_ENV_OFFSET 0xa0000
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTCOMMAND ""
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs=console=ttyS0,115200\0" \
- "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
- "0x010000@0xa0000(env),"\
- "0x500000@0xc0000(uimage),"\
- "0x1a40000@0x5c0000(rootfs)\0" \
- "mtdids=nand0=orion_nand\0"\
- "autostart=no\0"\
- "autoload=no\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR 8
-#endif /* CONFIG_CMD_NET */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
-#define CONFIG_EHCI_IS_TDI
-#endif /* CONFIG_CMD_USB */
-
-/*
- * File system
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_LZO
-
-/*
- * SATA
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif
-
-/*
- * EFI partition
- */
-
-#define CONFIG_KIRKWOOD_GPIO
-
-#endif /* _CONFIG_NAS220_H */
-
--
2.19.1.1215.g8438c0b245-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
