This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.
Signed-off-by: Simon Glass <s...@chromium.org> --- arch/arm/mach-imx/mx7/Kconfig | 1 - board/technexion/pico-imx7d/Kconfig | 15 -- board/technexion/pico-imx7d/MAINTAINERS | 16 -- board/technexion/pico-imx7d/Makefile | 4 - board/technexion/pico-imx7d/README | 64 ----- board/technexion/pico-imx7d/pico-imx7d.c | 315 ----------------------- board/technexion/pico-imx7d/spl.c | 122 --------- configs/pico-hobbit-imx7d_defconfig | 60 ----- configs/pico-imx7d_defconfig | 60 ----- configs/pico-pi-imx7d_defconfig | 60 ----- include/configs/pico-imx7d.h | 151 ----------- 11 files changed, 868 deletions(-) delete mode 100644 board/technexion/pico-imx7d/Kconfig delete mode 100644 board/technexion/pico-imx7d/MAINTAINERS delete mode 100644 board/technexion/pico-imx7d/Makefile delete mode 100644 board/technexion/pico-imx7d/README delete mode 100644 board/technexion/pico-imx7d/pico-imx7d.c delete mode 100644 board/technexion/pico-imx7d/spl.c delete mode 100644 configs/pico-hobbit-imx7d_defconfig delete mode 100644 configs/pico-imx7d_defconfig delete mode 100644 configs/pico-pi-imx7d_defconfig delete mode 100644 include/configs/pico-imx7d.h diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 329a4acaebb..63b90f99500 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -67,7 +67,6 @@ config SYS_SOC source "board/compulab/cl-som-imx7/Kconfig" source "board/freescale/mx7dsabresd/Kconfig" -source "board/technexion/pico-imx7d/Kconfig" source "board/toradex/colibri_imx7/Kconfig" endif diff --git a/board/technexion/pico-imx7d/Kconfig b/board/technexion/pico-imx7d/Kconfig deleted file mode 100644 index f4ae18ca62f..00000000000 --- a/board/technexion/pico-imx7d/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_PICO_IMX7D - -config SYS_BOARD - default "pico-imx7d" - -config SYS_VENDOR - default "technexion" - -config SYS_SOC - default "mx7" - -config SYS_CONFIG_NAME - default "pico-imx7d" - -endif diff --git a/board/technexion/pico-imx7d/MAINTAINERS b/board/technexion/pico-imx7d/MAINTAINERS deleted file mode 100644 index f9a1dfc05ec..00000000000 --- a/board/technexion/pico-imx7d/MAINTAINERS +++ /dev/null @@ -1,16 +0,0 @@ -TechNexion PICO-IMX7D board -M: Vanessa Maegima <vanessa.maeg...@nxp.com> -S: Maintained -F: board/technexion/pico-imx7d/ -F: include/configs/pico-imx7d.h -F: configs/pico-imx7d_defconfig - -TechNexion PICO-HOBBIT-IMX7 -M: Otavio Salvador <ota...@ossystems.com.br> -S: Maintained -F: configs/pico-hobbit-imx7d_defconfig - -TechNexion PICO-PI-IMX7 -M: Otavio Salvador <ota...@ossystems.com.br> -S: Maintained -F: configs/pico-pi-imx7d_defconfig diff --git a/board/technexion/pico-imx7d/Makefile b/board/technexion/pico-imx7d/Makefile deleted file mode 100644 index 4ae3d606b58..00000000000 --- a/board/technexion/pico-imx7d/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# (C) Copyright 2017 NXP Semiconductors - -obj-y := pico-imx7d.o spl.o diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README deleted file mode 100644 index 24eb97e82cc..00000000000 --- a/board/technexion/pico-imx7d/README +++ /dev/null @@ -1,64 +0,0 @@ -How to update U-Boot on pico-imx7d board ----------------------------------------- - -Required software on the host PC: - -- imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader - -Build U-Boot for pico: - -$ make mrproper -$ make pico-imx7d_defconfig -$ make - -This generates the SPL and u-boot.img binaries. - -1. Loading U-Boot via USB Serial Download Protocol - -Note: This method is convenient for development purposes. -If the eMMC has already a U-Boot flashed with DFU support then -the user can go to step 2 below in order to update U-Boot. - -Put pico board in USB download mode (refer to the PICO-iMX7D Quick Start Guide -page 3) - -Connect a USB to serial adapter between the host PC and pico. - -Connect a USB cable between the OTG pico port and the host PC. - -Open a terminal program such as minicom. - -Copy SPL and u-boot.img to the imx_usb_loader folder. - -Load the SPL binary via USB: - -$ sudo ./imx_usb SPL - -Load the u-boot.img binary via USB: - -$ sudo ./imx_usb u-boot.img - -Then U-Boot starts and its messages appear in the console program. - -Use the default environment variables: - -=> env default -f -a -=> saveenv - -2. Flashing U-Boot into the eMMC - -Run the DFU agent so we can flash the new images using dfu-util tool: - -=> dfu 0 mmc 0 - -Flash SPL and u-boot.img into the eMMC running the following commands on a PC: - -$ sudo dfu-util -D SPL -a spl - -$ sudo dfu-util -D u-boot.img -a u-boot - -Remove power from the pico board. - -Put pico board into normal boot mode. - -Power up the board and the new updated U-Boot should boot from eMMC. diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c deleted file mode 100644 index 53e14693a53..00000000000 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ /dev/null @@ -1,315 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2017 NXP Semiconductors - */ - -#include <asm/arch/clock.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx7-pins.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <asm/io.h> -#include <common.h> -#include <fsl_esdhc.h> -#include <i2c.h> -#include <miiphy.h> -#include <mmc.h> -#include <netdev.h> -#include <usb.h> -#include <power/pmic.h> -#include <power/pfuze3000_pmic.h> -#include "../../freescale/common/pfuze.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ - PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) -#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) - -#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) - -#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) - -#ifdef CONFIG_SYS_I2C_MXC -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C4 for PMIC */ -static struct i2c_pads_info i2c_pad_info4 = { - .scl = { - .i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC, - .gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC, - .gp = IMX_GPIO_NR(6, 16), - }, - .sda = { - .i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC, - .gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC, - .gp = IMX_GPIO_NR(6, 17), - }, -}; -#endif - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -#ifdef CONFIG_POWER -#define I2C_PMIC 3 -int power_init_board(void) -{ - struct pmic *p; - int ret; - unsigned int reg, rev_id; - - ret = power_pfuze3000_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("PFUZE3000"); - ret = pmic_probe(p); - if (ret) - return ret; - - pmic_reg_read(p, PFUZE3000_DEVICEID, ®); - pmic_reg_read(p, PFUZE3000_REVID, &rev_id); - printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); - - /* disable Low Power Mode during standby mode */ - pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); - reg |= 0x1; - pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); - - /* SW1A/1B mode set to APS/APS */ - reg = 0x8; - pmic_reg_write(p, PFUZE3000_SW1AMODE, reg); - pmic_reg_write(p, PFUZE3000_SW1BMODE, reg); - - /* SW1A/1B standby voltage set to 1.025V */ - reg = 0xd; - pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg); - pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg); - - /* decrease SW1B normal voltage to 0.975V */ - pmic_reg_read(p, PFUZE3000_SW1BVOLT, ®); - reg &= ~0x1f; - reg |= PFUZE3000_SW1AB_SETP(975); - pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg); - - return 0; -} -#endif - -static iomux_v3_cfg_t const wdog_pads[] = { - MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const uart5_pads[] = { - MX7D_PAD_I2C4_SCL__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { - MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -#ifdef CONFIG_FEC_MXC -static iomux_v3_cfg_t const fec1_pads[] = { - MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX7D_PAD_SD3_STROBE__GPIO6_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -#define FEC1_RST_GPIO IMX_GPIO_NR(6, 11) - -static void setup_iomux_fec(void) -{ - imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); - - gpio_direction_output(FEC1_RST_GPIO, 0); - udelay(500); - gpio_set_value(FEC1_RST_GPIO, 1); -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_fec(); - - return fecmxc_initialize_multi(bis, 0, - CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); -} - -static int setup_fec(void) -{ - struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs - = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17] */ - clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], - (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | - IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); - - return set_clk_enet(ENET_125MHZ); -} - -int board_phy_config(struct phy_device *phydev) -{ - unsigned short val; - - /* To enable AR8035 ouput a 125MHz clk from CLK_25M */ - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016); - phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007); - - val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe); - val &= 0xffe7; - val |= 0x18; - phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val); - - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); - - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} -#endif - -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); -} - -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC3_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - /* Assume uSDHC3 emmc is always present */ - return 1; -} - -int board_mmc_init(bd_t *bis) -{ - imx_iomux_v3_setup_multiple_pads( - usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} - -int board_early_init_f(void) -{ - setup_iomux_uart(); - -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); -#endif - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - -#ifdef CONFIG_FEC_MXC - setup_fec(); -#endif - - return 0; -} - -int board_late_init(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - /* - * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), - * since we use PMIC_PWRON to reset the board. - */ - clrsetbits_le16(&wdog->wcr, 0, 0x10); - - return 0; -} - -int checkboard(void) -{ - puts("Board: i.MX7D PICOSOM\n"); - - return 0; -} - -static iomux_v3_cfg_t const usb_otg2_pads[] = { - MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_ehci_hcd_init(int port) -{ - switch (port) { - case 0: - break; - case 1: - imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, - ARRAY_SIZE(usb_otg2_pads)); - break; - default: - return -EINVAL; - } - return 0; -} - -int board_usb_phy_mode(int port) -{ - switch (port) { - case 0: - return USB_INIT_DEVICE; - case 1: - return USB_INIT_HOST; - default: - return -EINVAL; - } - return 0; -} diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c deleted file mode 100644 index 8c3443875de..00000000000 --- a/board/technexion/pico-imx7d/spl.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Technexion Ltd. - * - * Author: Richard Hu <richard...@technexion.com> - */ - -#include <asm/arch/imx-regs.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch-mx7/mx7-ddr.h> -#include <asm/gpio.h> -#include <spl.h> - -#if defined(CONFIG_SPL_BUILD) - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ - return 0; -} -#endif - -static struct ddrc ddrc_regs_val = { - .mstr = 0x01040001, - .rfshtmg = 0x00400046, - .init1 = 0x00690000, - .init0 = 0x00020083, - .init3 = 0x09300004, - .init4 = 0x04080000, - .init5 = 0x00100004, - .rankctl = 0x0000033F, - .dramtmg0 = 0x09081109, - .dramtmg1 = 0x0007020d, - .dramtmg2 = 0x03040407, - .dramtmg3 = 0x00002006, - .dramtmg4 = 0x04020205, - .dramtmg5 = 0x03030202, - .dramtmg8 = 0x00000803, - .zqctl0 = 0x00800020, - .dfitmg0 = 0x02098204, - .dfitmg1 = 0x00030303, - .dfiupd0 = 0x80400003, - .dfiupd1 = 0x00100020, - .dfiupd2 = 0x80100004, - .addrmap4 = 0x00000F0F, - .odtcfg = 0x06000604, - .odtmap = 0x00000001, - .rfshtmg = 0x00400046, - .dramtmg0 = 0x09081109, - .addrmap0 = 0x0000001f, - .addrmap1 = 0x00080808, - .addrmap4 = 0x00000f0f, - .addrmap5 = 0x07070707, - .addrmap6 = 0x0f0f0707, -}; - -static struct ddrc_mp ddrc_mp_val = { - .pctrl_0 = 0x00000001, -}; - -static struct ddr_phy ddr_phy_regs_val = { - .phy_con0 = 0x17420f40, - .phy_con1 = 0x10210100, - .phy_con4 = 0x00060807, - .mdll_con0 = 0x1010007e, - .drvds_con0 = 0x00000d6e, - .cmd_sdll_con0 = 0x00000010, - .offset_lp_con0 = 0x0000000f, - .offset_rd_con0 = 0x08080808, - .offset_wr_con0 = 0x08080808, -}; - -static struct mx7_calibration calib_param = { - .num_val = 5, - .values = { - 0x0E407304, - 0x0E447304, - 0x0E447306, - 0x0E447304, - 0x0E447304, - }, -}; - -static void gpr_init(void) -{ - struct iomuxc_gpr_base_regs *gpr_regs = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - writel(0x4F400005, &gpr_regs->gpr[1]); -} - -static bool is_1g(void) -{ - gpio_direction_input(IMX_GPIO_NR(1, 12)); - return !gpio_get_value(IMX_GPIO_NR(1, 12)); -} - -static void ddr_init(void) -{ - if (is_1g()) - ddrc_regs_val.addrmap6 = 0x0f070707; - - mx7_dram_cfg(&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val, - &calib_param); -} - -void board_init_f(ulong dummy) -{ - arch_cpu_init(); - gpr_init(); - board_early_init_f(); - timer_init(); - preloader_console_init(); - ddr_init(); - memset(__bss_start, 0, __bss_end - __bss_start); - board_init_r(NULL, 0); -} - -void reset_cpu(ulong addr) -{ -} -#endif diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig deleted file mode 100644 index b02cae52379..00000000000 --- a/configs/pico-hobbit-imx7d_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TARGET_PICO_IMX7D=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ARMV7_BOOT_SEC_DEFAULT=y -CONFIG_IMX_RDC=y -CONFIG_IMX_BOOTAUX=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" -CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb" -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_USB_HOST_SUPPORT=y -CONFIG_SPL_USB_GADGET_SUPPORT=y -CONFIG_SPL_USB_SDP_SUPPORT=y -# CONFIG_CMD_BOOTD is not set -CONFIG_CMD_BOOTMENU=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_WRITE_SIZE=0x20000 -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_SDP=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MII is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_DFU_MMC=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_FASTBOOT_BUF_SIZE=0x10000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="FSL" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_OF_LIBFDT=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig deleted file mode 100644 index f355f07be7e..00000000000 --- a/configs/pico-imx7d_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TARGET_PICO_IMX7D=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ARMV7_BOOT_SEC_DEFAULT=y -CONFIG_IMX_RDC=y -CONFIG_IMX_BOOTAUX=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" -CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="ask" -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_USB_HOST_SUPPORT=y -CONFIG_SPL_USB_GADGET_SUPPORT=y -CONFIG_SPL_USB_SDP_SUPPORT=y -# CONFIG_CMD_BOOTD is not set -CONFIG_CMD_BOOTMENU=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_WRITE_SIZE=0x20000 -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_SDP=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MII is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_DFU_MMC=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_FASTBOOT_BUF_SIZE=0x10000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="FSL" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_OF_LIBFDT=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig deleted file mode 100644 index 3a182dcb810..00000000000 --- a/configs/pico-pi-imx7d_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_TARGET_PICO_IMX7D=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_ARMV7_BOOT_SEC_DEFAULT=y -CONFIG_IMX_RDC=y -CONFIG_IMX_BOOTAUX=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" -CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb" -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_USB_HOST_SUPPORT=y -CONFIG_SPL_USB_GADGET_SUPPORT=y -CONFIG_SPL_USB_SDP_SUPPORT=y -# CONFIG_CMD_BOOTD is not set -CONFIG_CMD_BOOTMENU=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_WRITE_SIZE=0x20000 -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_SDP=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MII is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_DFU_MMC=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_FASTBOOT_BUF_SIZE=0x10000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FSL_ESDHC=y -CONFIG_PHYLIB=y -CONFIG_MII=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="FSL" -CONFIG_USB_GADGET_VENDOR_NUM=0x0525 -CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_CI_UDC=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h deleted file mode 100644 index 2bc42a04a04..00000000000 --- a/include/configs/pico-imx7d.h +++ /dev/null @@ -1,151 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 NXP Semiconductors - * - * Configuration settings for the i.MX7D Pico board. - */ - -#ifndef __PICO_IMX7D_CONFIG_H -#define __PICO_IMX7D_CONFIG_H - -#include "mx7_common.h" - -#include "imx7_spl.h" - -#ifdef CONFIG_SPL_OS_BOOT -/* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000 - -/* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) - -#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR - -/* Network */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 1 - -#define CONFIG_PHY_ATHEROS - -/* ENET1 */ -#define IMX_FEC_BASE ENET_IPS_BASE_ADDR - -/* MMC Config */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -#define CONFIG_DFU_ENV_SETTINGS \ - "dfu_alt_info=" \ - "spl raw 0x2 0x400;" \ - "u-boot raw 0x8a 0x400;" \ - "/boot/zImage ext4 0 1;" \ - "/boot/imx7d-pico-hobbit.dtb ext4 0 1;" \ - "/boot/imx7d-pico-pi.dtb ext4 0 1;" \ - "rootfs part 0 1\0" \ - -#define BOOTMENU_ENV \ - "bootmenu_0=Boot using PICO-Hobbit baseboard=" \ - "setenv fdtfile imx7d-pico-hobbit.dtb\0" \ - "bootmenu_1=Boot using PICO-Pi baseboard=" \ - "setenv fdtfile imx7d-pico-pi.dtb\0" \ - -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc4\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - BOOTMENU_ENV \ - "fdt_addr=0x83000000\0" \ - "fdt_addr_r=0x83000000\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "ramdisk_addr_r=0x83000000\0" \ - "ramdiskaddr=0x83000000\0" \ - "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ - CONFIG_DFU_ENV_SETTINGS \ - "findfdt=" \ - "if test $fdtfile = ask ; then " \ - "bootmenu -1; fi;" \ - "if test $fdtfile != ask ; then " \ - "saveenv; fi;\0" \ - "finduuid=part uuid mmc 0:1 uuid\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ - "fastboot_partition_alias_system=rootfs\0" \ - "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* I2C configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 -#define CONFIG_SYS_I2C_MXC_I2C2 -#define CONFIG_SYS_I2C_MXC_I2C3 -#define CONFIG_SYS_I2C_MXC_I2C4 -#define CONFIG_SYS_I2C_SPEED 100000 - -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE3000 -#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 - -/* FLASH and environment organization */ -#define CONFIG_ENV_SIZE SZ_8K - -#define CONFIG_ENV_OFFSET (8 * SZ_64K) -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 0 - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -#define CONFIG_IMX_THERMAL - -#endif -- 2.19.1.1215.g8438c0b245-goog _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
