On Mon, 2018-11-19 at 08:53 -0700, Simon Glass wrote:
> This board has not been converted to CONFIG_DM_BLK by the deadline.
> Remove it.
NAK. I started working on PXA MMC driver which so far is not DM
enabled. Hopefully, I have something ready later this week.
> Signed-off-by: Simon Glass <s...@chromium.org>
> ---
>
> arch/arm/Kconfig | 1 -
> board/toradex/colibri_pxa270/Kconfig | 23 ---
> board/toradex/colibri_pxa270/MAINTAINERS | 6 -
> board/toradex/colibri_pxa270/Makefile | 7 -
> board/toradex/colibri_pxa270/colibri_pxa270.c | 138 -------------
> configs/colibri_pxa270_defconfig | 40 ----
> include/configs/colibri_pxa270.h | 188 ----------------
> --
> 7 files changed, 403 deletions(-)
> delete mode 100644 board/toradex/colibri_pxa270/Kconfig
> delete mode 100644 board/toradex/colibri_pxa270/MAINTAINERS
> delete mode 100644 board/toradex/colibri_pxa270/Makefile
> delete mode 100644 board/toradex/colibri_pxa270/colibri_pxa270.c
> delete mode 100644 configs/colibri_pxa270_defconfig
> delete mode 100644 include/configs/colibri_pxa270.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 76f9977eda9..740897539e8 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1530,7 +1530,6 @@ source "board/spear/x600/Kconfig"
> source "board/st/stv0991/Kconfig"
> source "board/tcl/sl50/Kconfig"
> source "board/ucRobotics/bubblegum_96/Kconfig"
> -source "board/toradex/colibri_pxa270/Kconfig"
> source "board/vscom/baltos/Kconfig"
> source "board/woodburn/Kconfig"
> source "board/xilinx/Kconfig"
> diff --git a/board/toradex/colibri_pxa270/Kconfig
> b/board/toradex/colibri_pxa270/Kconfig
> deleted file mode 100644
> index f646baa3f05..00000000000
> --- a/board/toradex/colibri_pxa270/Kconfig
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -if TARGET_COLIBRI_PXA270
> -
> -config SYS_BOARD
> - default "colibri_pxa270"
> -
> -config SYS_VENDOR
> - default "toradex"
> -
> -config SYS_CONFIG_NAME
> - default "colibri_pxa270"
> -
> -config TDX_CFG_BLOCK
> - default y
> -
> -config TDX_HAVE_NOR
> - default y
> -
> -config TDX_CFG_BLOCK_OFFSET
> - default "262144"
> -
> -source "board/toradex/common/Kconfig"
> -
> -endif
> diff --git a/board/toradex/colibri_pxa270/MAINTAINERS
> b/board/toradex/colibri_pxa270/MAINTAINERS
> deleted file mode 100644
> index b378d7be5a4..00000000000
> --- a/board/toradex/colibri_pxa270/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -COLIBRI_PXA270 BOARD
> -M: Marek Vasut <marek.va...@gmail.com>
> -S: Maintained
> -F: board/toradex/colibri_pxa270/
> -F: include/configs/colibri_pxa270.h
> -F: configs/colibri_pxa270_defconfig
> diff --git a/board/toradex/colibri_pxa270/Makefile
> b/board/toradex/colibri_pxa270/Makefile
> deleted file mode 100644
> index ea610cfea92..00000000000
> --- a/board/toradex/colibri_pxa270/Makefile
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# Toradex Colibri PXA270 Support
> -#
> -# Copyright (C) 2010 Marek Vasut <marek.va...@gmail.com>
> -
> -obj-y := colibri_pxa270.o
> diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c
> b/board/toradex/colibri_pxa270/colibri_pxa270.c
> deleted file mode 100644
> index e9e17508a57..00000000000
> --- a/board/toradex/colibri_pxa270/colibri_pxa270.c
> +++ /dev/null
> @@ -1,138 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Toradex Colibri PXA270 Support
> - *
> - * Copyright (C) 2010 Marek Vasut <marek.va...@gmail.com>
> - * Copyright (C) 2016 Marcel Ziswiler <marcel.ziswi...@toradex.com>
> - */
> -
> -#include <common.h>
> -#include <dm.h>
> -#include <asm/arch/hardware.h>
> -#include <asm/arch/pxa.h>
> -#include <asm/arch/regs-mmc.h>
> -#include <asm/arch/regs-uart.h>
> -#include <asm/io.h>
> -#include <dm/platdata.h>
> -#include <dm/platform_data/serial_pxa.h>
> -#include <netdev.h>
> -#include <serial.h>
> -#include <usb.h>
> -#include <asm/mach-types.h>
> -#include "../common/tdx-common.h"
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -int board_init(void)
> -{
> - /* We have RAM, disable cache */
> - dcache_disable();
> - icache_disable();
> -
> - /* arch number of Toradex Colibri PXA270 */
> - gd->bd->bi_arch_number = MACH_TYPE_COLIBRI;
> -
> - /* adress of boot parameters */
> - gd->bd->bi_boot_params = 0xa0000100;
> -
> - return 0;
> -}
> -
> -int checkboard(void)
> -{
> - puts("Model: Toradex Colibri PXA270\n");
> -
> - return 0;
> -}
> -
> -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
> -int ft_board_setup(void *blob, bd_t *bd)
> -{
> - return ft_common_board_setup(blob, bd);
> -}
> -#endif
> -
> -int dram_init(void)
> -{
> - pxa2xx_dram_init();
> - gd->ram_size = PHYS_SDRAM_1_SIZE;
> - return 0;
> -}
> -
> -#ifdef CONFIG_CMD_USB
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> - writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
> - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 |
> UHCHR_SSE),
> - UHCHR);
> -
> - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
> -
> - while (UHCHR & UHCHR_FSBIR)
> - ;
> -
> - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
> - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
> -
> - /* Clear any OTG Pin Hold */
> - if (readl(PSSR) & PSSR_OTGPH)
> - writel(readl(PSSR) | PSSR_OTGPH, PSSR);
> -
> - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
> - writel(readl(UHCRHDA) | 0x100, UHCRHDA);
> -
> - /* Set port power control mask bits, only 3 ports. */
> - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
> -
> - /* enable port 2 */
> - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
> - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
> -
> - return 0;
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> - return 0;
> -}
> -
> -void usb_board_stop(void)
> -{
> - writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
> - udelay(11);
> - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
> -
> - writel(readl(UHCCOMS) | 1, UHCCOMS);
> - udelay(10);
> -
> - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
> -
> - return;
> -}
> -#endif
> -
> -#ifdef CONFIG_DRIVER_DM9000
> -int board_eth_init(bd_t *bis)
> -{
> - return dm9000_initialize(bis);
> -}
> -#endif
> -
> -#ifdef CONFIG_CMD_MMC
> -int board_mmc_init(bd_t *bis)
> -{
> - pxa_mmc_register(0);
> - return 0;
> -}
> -#endif
> -
> -static const struct pxa_serial_platdata serial_platdata = {
> - .base = (struct pxa_uart_regs *)FFUART_BASE,
> - .port = FFUART_INDEX,
> - .baudrate = CONFIG_BAUDRATE,
> -};
> -
> -U_BOOT_DEVICE(pxa_serials) = {
> - .name = "serial_pxa",
> - .platdata = &serial_platdata,
> -};
> diff --git a/configs/colibri_pxa270_defconfig
> b/configs/colibri_pxa270_defconfig
> deleted file mode 100644
> index 2ff489f4a92..00000000000
> --- a/configs/colibri_pxa270_defconfig
> +++ /dev/null
> @@ -1,40 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_TARGET_COLIBRI_PXA270=y
> -CONFIG_SYS_TEXT_BASE=0x0
> -CONFIG_ENV_VARS_UBOOT_CONFIG=y
> -CONFIG_NR_DRAM_BANKS=1
> -CONFIG_USE_BOOTARGS=y
> -CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
> -# CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_DISPLAY_BOARDINFO_LATE=y
> -# CONFIG_CMDLINE_EDITING is not set
> -# CONFIG_AUTO_COMPLETE is not set
> -# CONFIG_SYS_LONGHELP is not set
> -CONFIG_SYS_PROMPT="$ "
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_EXPORTENV is not set
> -# CONFIG_CMD_IMPORTENV is not set
> -# CONFIG_CMD_LOADB is not set
> -# CONFIG_CMD_LOADS is not set
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_ENV_IS_IN_FLASH=y
> -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_DM=y
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_SYS_FLASH_PROTECTION=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_DM_SERIAL=y
> -CONFIG_PXA_SERIAL=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -# CONFIG_REGEX is not set
> -CONFIG_OF_LIBFDT=y
> -# CONFIG_EFI_LOADER is not set
> diff --git a/include/configs/colibri_pxa270.h
> b/include/configs/colibri_pxa270.h
> deleted file mode 100644
> index 622b02492dd..00000000000
> --- a/include/configs/colibri_pxa270.h
> +++ /dev/null
> @@ -1,188 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Toradex Colibri PXA270 configuration file
> - *
> - * Copyright (C) 2010 Marek Vasut <marek.va...@gmail.com>
> - * Copyright (C) 2015-2016 Marcel Ziswiler <mar...@ziswiler.com>
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Board Configuration Options
> - */
> -#define CONFIG_CPU_PXA27X 1 /* Marvell
> PXA270 CPU */
> -/* Avoid overwriting factory configuration block */
> -#define CONFIG_BOARD_SIZE_LIMIT 0x40000
> -
> -/* We will never enable dcache because we have to setup MMU first */
> -#define CONFIG_SYS_DCACHE_OFF
> -
> -/*
> - * Environment settings
> - */
> -#define CONFIG_ENV_OVERWRITE
> -#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
> -#define CONFIG_ARCH_CPU_INIT
> -#define CONFIG_BOOTCOMMAND
> \
> - "if fatload mmc 0 0xa0000000 uImage; then "
> \
> - "bootm 0xa0000000; "
> \
> - "fi; "
> \
> - "if usb reset && fatload usb 0 0xa0000000 uImage; then "
> \
> - "bootm 0xa0000000; "
> \
> - "fi; "
> \
> - "bootm 0xc0000;"
> -#define CONFIG_TIMESTAMP
> -#define CONFIG_CMDLINE_TAG
> -#define CONFIG_SETUP_MEMORY_TAGS
> -
> -/*
> - * Serial Console Configuration
> - */
> -
> -/*
> - * Bootloader Components Configuration
> - */
> -
> -/* I2C support */
> -#ifdef CONFIG_SYS_I2C
> -#define CONFIG_SYS_I2C_PXA
> -#define CONFIG_PXA_STD_I2C
> -#define CONFIG_PXA_PWR_I2C
> -#define CONFIG_SYS_I2C_SPEED 100000
> -#endif
> -
> -/* LCD support */
> -#ifdef CONFIG_LCD
> -#define CONFIG_PXA_LCD
> -#define CONFIG_PXA_VGA
> -#define CONFIG_LCD_LOGO
> -#endif
> -
> -/*
> - * Networking Configuration
> - */
> -#ifdef CONFIG_CMD_NET
> -
> -#define CONFIG_DRIVER_DM9000 1
> -#define CONFIG_DM9000_BASE 0x08000000
> -#define DM9000_IO (CONFIG_DM9000_BASE)
> -#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
> -#define CONFIG_NET_RETRY_COUNT 10
> -
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#endif
> -
> -#define CONFIG_SYS_DEVICE_NULLDEV 1
> -
> -/*
> - * Clock Configuration
> - */
> -#define CONFIG_SYS_CPUSPEED 0x290
> /* 520MHz */
> -
> -/*
> - * DRAM Map
> - */
> -#define PHYS_SDRAM_1 0xa0000000
> /* SDRAM Bank #1 */
> -#define PHYS_SDRAM_1_SIZE 0x04000000 /*
> 64 MB */
> -
> -#define CONFIG_SYS_DRAM_BASE 0xa0000000
> /* CS0 */
> -#define CONFIG_SYS_DRAM_SIZE 0x04000000
> /* 64 MB DRAM */
> -
> -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest
> works on */
> -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4
> ... 8 MB in DRAM */
> -
> -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
> -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
> -
> -/*
> - * NOR FLASH
> - */
> -#ifdef CONFIG_CMD_FLASH
> -#define PHYS_FLASH_1 0x00000000
> /* Flash Bank #1 */
> -#define PHYS_FLASH_SIZE 0x02000000
> /* 32 MB */
> -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
> -
> -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
> -
> -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
> -#define CONFIG_SYS_MAX_FLASH_BANKS 1
> -
> -#define CONFIG_SYS_FLASH_ERASE_TOUT (25 *
> CONFIG_SYS_HZ)
> -#define CONFIG_SYS_FLASH_WRITE_TOUT (25 *
> CONFIG_SYS_HZ)
> -#define CONFIG_SYS_FLASH_LOCK_TOUT (25 *
> CONFIG_SYS_HZ)
> -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 *
> CONFIG_SYS_HZ)
> -#endif
> -
> -#define CONFIG_SYS_MONITOR_BASE 0x0
> -#define CONFIG_SYS_MONITOR_LEN 0x40000
> -
> -/* Skip factory configuration block */
> -#define CONFIG_ENV_ADDR \
> - (CONFIG_SYS_MONITOR_BASE +
> CONFIG_SYS_MONITOR_LEN + 0x40000)
> -#define CONFIG_ENV_SIZE 0x40000
> -#define CONFIG_ENV_SECT_SIZE 0x40000
> -
> -/*
> - * GPIO settings
> - */
> -#define CONFIG_SYS_GPSR0_VAL 0x00000000
> -#define CONFIG_SYS_GPSR1_VAL 0x00020000
> -#define CONFIG_SYS_GPSR2_VAL 0x0002c000
> -#define CONFIG_SYS_GPSR3_VAL 0x00000000
> -
> -#define CONFIG_SYS_GPCR0_VAL 0x00000000
> -#define CONFIG_SYS_GPCR1_VAL 0x00000000
> -#define CONFIG_SYS_GPCR2_VAL 0x00000000
> -#define CONFIG_SYS_GPCR3_VAL 0x00000000
> -
> -#define CONFIG_SYS_GPDR0_VAL 0xc8008000
> -#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
> -#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
> -#define CONFIG_SYS_GPDR3_VAL 0x0061e804
> -
> -#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
> -#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
> -#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
> -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
> -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
> -#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
> -#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
> -#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
> -
> -#define CONFIG_SYS_PSSR_VAL 0x30
> -
> -/*
> - * Clock settings
> - */
> -#define CONFIG_SYS_CKEN 0x00500240
> -#define CONFIG_SYS_CCCR 0x02000290
> -
> -/*
> - * Memory settings
> - */
> -#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
> -#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
> -#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
> -#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
> -#define CONFIG_SYS_MDREFR_VAL 0x2003a031
> -#define CONFIG_SYS_MDMRS_VAL 0x00220022
> -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
> -#define CONFIG_SYS_SXCNFG_VAL 0x40044004
> -
> -/*
> - * PCMCIA and CF Interfaces
> - */
> -#define CONFIG_SYS_MECR_VAL 0x00000000
> -#define CONFIG_SYS_MCMEM0_VAL 0x00028307
> -#define CONFIG_SYS_MCMEM1_VAL 0x00014307
> -#define CONFIG_SYS_MCATT0_VAL 0x00038787
> -#define CONFIG_SYS_MCATT1_VAL 0x0001c787
> -#define CONFIG_SYS_MCIO0_VAL 0x0002830f
> -#define CONFIG_SYS_MCIO1_VAL 0x0001430f
> -
> -#include "pxa-common.h"
> -
> -#endif /* __CONFIG_H */
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
