This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.
Signed-off-by: Simon Glass <s...@chromium.org> --- arch/arm/mach-omap2/Kconfig | 1 - board/ti/am335x/Kconfig | 24 - board/ti/am335x/MAINTAINERS | 12 - board/ti/am335x/Makefile | 11 - board/ti/am335x/README | 205 ----- board/ti/am335x/board.c | 1073 ---------------------- board/ti/am335x/board.h | 97 -- board/ti/am335x/mux.c | 413 --------- board/ti/am335x/u-boot.lds | 164 ---- configs/am335x_boneblack_defconfig | 51 - configs/am335x_boneblack_vboot_defconfig | 56 -- configs/am335x_evm_defconfig | 64 -- configs/am335x_evm_nor_defconfig | 53 -- configs/am335x_evm_norboot_defconfig | 50 - configs/am335x_evm_spiboot_defconfig | 48 - configs/am335x_evm_usbspl_defconfig | 56 -- include/configs/am335x_evm.h | 343 ------- 17 files changed, 2721 deletions(-) delete mode 100644 board/ti/am335x/Kconfig delete mode 100644 board/ti/am335x/MAINTAINERS delete mode 100644 board/ti/am335x/Makefile delete mode 100644 board/ti/am335x/README delete mode 100644 board/ti/am335x/board.c delete mode 100644 board/ti/am335x/board.h delete mode 100644 board/ti/am335x/mux.c delete mode 100644 board/ti/am335x/u-boot.lds delete mode 100644 configs/am335x_boneblack_defconfig delete mode 100644 configs/am335x_boneblack_vboot_defconfig delete mode 100644 configs/am335x_evm_defconfig delete mode 100644 configs/am335x_evm_nor_defconfig delete mode 100644 configs/am335x_evm_norboot_defconfig delete mode 100644 configs/am335x_evm_spiboot_defconfig delete mode 100644 configs/am335x_evm_usbspl_defconfig delete mode 100644 include/configs/am335x_evm.h diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 438cbb30419..3b4cb157d4d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -183,7 +183,6 @@ source "board/siemens/rut/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" -source "board/ti/am335x/Kconfig" source "board/compulab/cm_t335/Kconfig" config SPL_LDSCRIPT diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig deleted file mode 100644 index b66ca1a5798..00000000000 --- a/board/ti/am335x/Kconfig +++ /dev/null @@ -1,24 +0,0 @@ -if TARGET_AM335X_EVM - -config SYS_BOARD - default "am335x" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "am335x_evm" - -config NOR - bool "Support for NOR flash" - help - The AM335x SoC supports having a NOR flash connected to the GPMC. - In practice this is seen as a NOR flash module connected to the - "memory cape" for the BeagleBone family. - -source "board/ti/common/Kconfig" - -endif diff --git a/board/ti/am335x/MAINTAINERS b/board/ti/am335x/MAINTAINERS deleted file mode 100644 index c99e06dc10b..00000000000 --- a/board/ti/am335x/MAINTAINERS +++ /dev/null @@ -1,12 +0,0 @@ -AM335X BOARD -M: Tom Rini <tr...@konsulko.com> -S: Maintained -F: board/ti/am335x/ -F: include/configs/am335x_evm.h -F: configs/am335x_boneblack_defconfig -F: configs/am335x_boneblack_vboot_defconfig -F: configs/am335x_evm_defconfig -F: configs/am335x_evm_nor_defconfig -F: configs/am335x_evm_norboot_defconfig -F: configs/am335x_evm_spiboot_defconfig -F: configs/am335x_evm_usbspl_defconfig diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile deleted file mode 100644 index c34b9b1dd8a..00000000000 --- a/board/ti/am335x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - -ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) -obj-y := mux.o -endif - -obj-y += board.o diff --git a/board/ti/am335x/README b/board/ti/am335x/README deleted file mode 100644 index 19e0eccbac9..00000000000 --- a/board/ti/am335x/README +++ /dev/null @@ -1,205 +0,0 @@ -Summary -======= - -This document covers various features of the 'am335x_evm' build, and some of -the related build targets (am335x_evm_uartN, etc). - -Hardware -======== - -The binary produced by this board supports, based on parsing of the EEPROM -documented in TI's reference designs: -- AM335x GP EVM -- AM335x EVM SK -- Beaglebone White -- Beaglebone Black - -Customization -============= - -Given that all of the above boards are reference platforms (and the -Beaglebone platforms are OSHA), it is likely that this platform code and -configuration will be used as the basis of a custom platform. It is -worth noting that aside from things such as NAND or MMC only being -required if a custom platform makes use of these blocks, the following -are required, depending on design: - -- GPIO is only required if DDR3 power is controlled in a way similar to - EVM SK -- SPI is only required for SPI flash, or exposing the SPI bus. - -The following blocks are required: -- I2C, to talk with the PMIC and ensure that we do not run afoul of - errata 1.0.24. - -When removing options as part of customization, -CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your -needs and to remove no longer relevant options as in some cases we -define additional text blocks (such as for NAND or DFU strings). Also -note that all of the SPL options are grouped together, rather than with -the IP blocks, so both areas will need their choices updated to reflect -the custom design. - -NAND -==== - -The AM335x GP EVM ships with a 256MiB NAND available in most profiles. In -this example to program the NAND we assume that an SD card has been -inserted with the files to write in the first SD slot and that mtdparts -have been configured correctly for the board. All images are first loaded -into memory, then written to NAND. - -Step-1: Building u-boot for NAND boot - Set following CONFIGxx options for NAND device. - CONFIG_SYS_NAND_PAGE_SIZE number of main bytes in NAND page - CONFIG_SYS_NAND_OOBSIZE number of OOB bytes in NAND page - CONFIG_SYS_NAND_BLOCK_SIZE number of bytes in NAND erase-block - CONFIG_SYS_NAND_ECCPOS ECC map for NAND page - CONFIG_NAND_OMAP_ECCSCHEME (refer doc/README.nand) - -Step-2: Flashing NAND via MMC/SD - # select BOOTSEL to MMC/SD boot and boot from MMC/SD card - U-Boot # mmc rescan - # erase flash - U-Boot # nand erase.chip - U-Boot # env default -f -a - U-Boot # saveenv - # flash MLO. Redundant copies of MLO are kept for failsafe - U-Boot # load mmc 0 0x82000000 MLO - U-Boot # nand write 0x82000000 0x00000 0x20000 - U-Boot # nand write 0x82000000 0x20000 0x20000 - U-Boot # nand write 0x82000000 0x40000 0x20000 - U-Boot # nand write 0x82000000 0x60000 0x20000 - # flash u-boot.img - U-Boot # load mmc 0 0x82000000 u-boot.img - U-Boot # nand write 0x82000000 0x80000 0x60000 - # flash kernel image - U-Boot # load mmc 0 0x82000000 uImage - U-Boot # nand write 0x82000000 ${nandsrcaddr} ${nandimgsize} - # flash filesystem image - U-Boot # load mmc 0 0x82000000 filesystem.img - U-Boot # nand write 0x82000000 ${loadaddress} 0x300000 - -Step-3: Set BOOTSEL pin to select NAND boot, and POR the device. - The device should boot from images flashed on NAND device. - -NOR -=== - -The Beaglebone White can be equipped with a "memory cape" that in turn can -have a NOR module plugged into it. In this case it is then possible to -program and boot from NOR. Note that due to how U-Boot is designed we -must build a specific version of U-Boot that knows we have NOR flash. This -build is named 'am335x_evm_nor'. Further, we have a 'am335x_evm_norboot' -build that will assume that the environment is on NOR rather than NAND. In -the following example we assume that and SD card has been populated with -MLO and u-boot.img from a 'am335x_evm_nor' build and also contains the -'u-boot.bin' from a 'am335x_evm_norboot' build. When booting from NOR, a -binary must be written to the start of NOR, with no header or similar -prepended. In the following example we use a size of 512KiB (0x80000) -as that is how much space we set aside before the environment, as per -the config file. - -U-Boot # mmc rescan -U-Boot # load mmc 0 ${loadaddr} u-boot.bin -U-Boot # protect off 08000000 +80000 -U-Boot # erase 08000000 +80000 -U-Boot # cp.b ${loadaddr} 08000000 ${filesize} - -Falcon Mode -=========== - -The default build includes "Falcon Mode" (see doc/README.falcon) via NAND, -eMMC (or raw SD cards) and FAT SD cards. Our default behavior currently is -to read a 'c' on the console while in SPL at any point prior to loading the -OS payload (so as soon as possible) to opt to booting full U-Boot. Also -note that while one can program Falcon Mode "in place" great care needs to -be taken by the user to not 'brick' their setup. As these are all eval -boards with multiple boot methods, recovery should not be an issue in this -worst-case however. - -Falcon Mode: eMMC -================= - -The recommended layout in this case is: - -MMC BLOCKS |--------------------------------| LOCATION IN BYTES -0x0000 - 0x007F : MBR or GPT table : 0x000000 - 0x020000 -0x0080 - 0x00FF : ARGS or FDT file : 0x010000 - 0x020000 -0x0100 - 0x01FF : SPL.backup1 (first copy used) : 0x020000 - 0x040000 -0x0200 - 0x02FF : SPL.backup2 (second copy used) : 0x040000 - 0x060000 -0x0300 - 0x06FF : U-Boot : 0x060000 - 0x0e0000 -0x0700 - 0x08FF : U-Boot Env + Redundant : 0x0e0000 - 0x120000 -0x0900 - 0x28FF : Kernel : 0x120000 - 0x520000 - -Note that when we run 'spl export' it will prepare to boot the kernel. -This includes relocation of the uImage from where we loaded it to the entry -point defined in the header. As these locations overlap by default, it -would leave us with an image that if written to MMC will not boot, so -instead of using the loadaddr variable we use 0x81000000 in the following -example. In this example we are loading from the network, for simplicity, -and assume a valid partition table already exists and 'mmc dev' has already -been run to select the correct device. Also note that if you previously -had a FAT partition (such as on a Beaglebone Black) it is not enough to -write garbage into the area, you must delete it from the partition table -first. - -# Ensure we are able to talk with this mmc device -U-Boot # mmc rescan -U-Boot # tftp 81000000 am335x/MLO -# Write to two of the backup locations ROM uses -U-Boot # mmc write 81000000 100 100 -U-Boot # mmc write 81000000 200 100 -# Write U-Boot to the location set in the config -U-Boot # tftp 81000000 am335x/u-boot.img -U-Boot # mmc write 81000000 300 400 -# Load kernel and device tree into memory, perform export -U-Boot # tftp 81000000 am335x/uImage -U-Boot # run findfdt -U-Boot # tftp ${fdtaddr} am335x/${fdtfile} -U-Boot # run mmcargs -U-Boot # spl export fdt 81000000 - ${fdtaddr} -# Write the updated device tree to MMC -U-Boot # mmc write ${fdtaddr} 80 80 -# Write the uImage to MMC -U-Boot # mmc write 81000000 900 2000 - -Falcon Mode: FAT SD cards -========================= - -In this case the additional file is written to the filesystem. In this -example we assume that the uImage and device tree to be used are already on -the FAT filesystem (only the uImage MUST be for this to function -afterwards) along with a Falcon Mode aware MLO and the FAT partition has -already been created and marked bootable: - -U-Boot # mmc rescan -# Load kernel and device tree into memory, perform export -U-Boot # load mmc 0:1 ${loadaddr} uImage -U-Boot # run findfdt -U-Boot # load mmc 0:1 ${fdtaddr} ${fdtfile} -U-Boot # run mmcargs -U-Boot # spl export fdt ${loadaddr} - ${fdtaddr} - -This will print a number of lines and then end with something like: - Using Device Tree in place at 80f80000, end 80f85928 - Using Device Tree in place at 80f80000, end 80f88928 -So then you: - -U-Boot # fatwrite mmc 0:1 0x80f80000 args 8928 - -Falcon Mode: NAND -================= - -In this case the additional data is written to another partition of the -NAND. In this example we assume that the uImage and device tree to be are -already located on the NAND somewhere (such as filesystem or mtd partition) -along with a Falcon Mode aware MLO written to the correct locations for -booting and mtdparts have been configured correctly for the board: - -U-Boot # nand read ${loadaddr} kernel -U-Boot # load nand rootfs ${fdtaddr} /boot/am335x-evm.dtb -U-Boot # run nandargs -U-Boot # spl export fdt ${loadaddr} - ${fdtaddr} -U-Boot # nand erase.part u-boot-spl-os -U-Boot # nand write ${fdtaddr} u-boot-spl-os diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c deleted file mode 100644 index 13845251afb..00000000000 --- a/board/ti/am335x/board.c +++ /dev/null @@ -1,1073 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board.c - * - * Board functions for TI AM335X based boards - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#include <common.h> -#include <dm.h> -#include <errno.h> -#include <spl.h> -#include <serial.h> -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/omap.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/clock.h> -#include <asm/arch/clk_synthesizer.h> -#include <asm/arch/gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mem.h> -#include <asm/io.h> -#include <asm/emif.h> -#include <asm/gpio.h> -#include <asm/omap_common.h> -#include <asm/omap_sec_common.h> -#include <asm/omap_mmc.h> -#include <i2c.h> -#include <miiphy.h> -#include <cpsw.h> -#include <power/tps65217.h> -#include <power/tps65910.h> -#include <environment.h> -#include <watchdog.h> -#include <environment.h> -#include "../common/board_detect.h" -#include "board.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPIO that controls power to DDR on EVM-SK */ -#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio)) -#define GPIO_DDR_VTT_EN GPIO_TO_PIN(0, 7) -#define ICE_GPIO_DDR_VTT_EN GPIO_TO_PIN(0, 18) -#define GPIO_PR1_MII_CTRL GPIO_TO_PIN(3, 4) -#define GPIO_MUX_MII_CTRL GPIO_TO_PIN(3, 10) -#define GPIO_FET_SWITCH_CTRL GPIO_TO_PIN(0, 7) -#define GPIO_PHY_RESET GPIO_TO_PIN(2, 5) -#define GPIO_ETH0_MODE GPIO_TO_PIN(0, 11) -#define GPIO_ETH1_MODE GPIO_TO_PIN(1, 26) - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -#define GPIO0_RISINGDETECT (AM33XX_GPIO0_BASE + OMAP_GPIO_RISINGDETECT) -#define GPIO1_RISINGDETECT (AM33XX_GPIO1_BASE + OMAP_GPIO_RISINGDETECT) - -#define GPIO0_IRQSTATUS1 (AM33XX_GPIO0_BASE + OMAP_GPIO_IRQSTATUS1) -#define GPIO1_IRQSTATUS1 (AM33XX_GPIO1_BASE + OMAP_GPIO_IRQSTATUS1) - -#define GPIO0_IRQSTATUSRAW (AM33XX_GPIO0_BASE + 0x024) -#define GPIO1_IRQSTATUSRAW (AM33XX_GPIO1_BASE + 0x024) - -/* - * Read header information from EEPROM into global structure. - */ -#ifdef CONFIG_TI_I2C_BOARD_DETECT -void do_board_detect(void) -{ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - - if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, - CONFIG_EEPROM_CHIP_ADDRESS)) - printf("ti_i2c_eeprom_init failed\n"); -} -#endif - -#ifndef CONFIG_DM_SERIAL -struct serial_device *default_serial_console(void) -{ - if (board_is_icev2()) - return &eserial4_device; - else - return &eserial1_device; -} -#endif - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -static const struct ddr_data ddr2_data = { - .datardsratio0 = MT47H128M16RT25E_RD_DQS, - .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, - .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr2_cmd_ctrl_data = { - .cmd0csratio = MT47H128M16RT25E_RATIO, - - .cmd1csratio = MT47H128M16RT25E_RATIO, - - .cmd2csratio = MT47H128M16RT25E_RATIO, -}; - -static const struct emif_regs ddr2_emif_reg_data = { - .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, - .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, - .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, - .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, - .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, -}; - -static const struct emif_regs ddr2_evm_emif_reg_data = { - .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, - .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, - .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, - .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, - .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, - .ocp_config = EMIF_OCP_CONFIG_AM335X_EVM, - .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = MT41J128MJT125_RD_DQS, - .datawdsratio0 = MT41J128MJT125_WR_DQS, - .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, - .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, -}; - -static const struct ddr_data ddr3_beagleblack_data = { - .datardsratio0 = MT41K256M16HA125E_RD_DQS, - .datawdsratio0 = MT41K256M16HA125E_WR_DQS, - .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, - .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -}; - -static const struct ddr_data ddr3_evm_data = { - .datardsratio0 = MT41J512M8RH125_RD_DQS, - .datawdsratio0 = MT41J512M8RH125_WR_DQS, - .datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE, - .datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA, -}; - -static const struct ddr_data ddr3_icev2_data = { - .datardsratio0 = MT41J128MJT125_RD_DQS_400MHz, - .datawdsratio0 = MT41J128MJT125_WR_DQS_400MHz, - .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE_400MHz, - .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA_400MHz, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = MT41J128MJT125_RATIO, - .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, - - .cmd1csratio = MT41J128MJT125_RATIO, - .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, - - .cmd2csratio = MT41J128MJT125_RATIO, - .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, -}; - -static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = { - .cmd0csratio = MT41K256M16HA125E_RATIO, - .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd1csratio = MT41K256M16HA125E_RATIO, - .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd2csratio = MT41K256M16HA125E_RATIO, - .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -}; - -static const struct cmd_control ddr3_evm_cmd_ctrl_data = { - .cmd0csratio = MT41J512M8RH125_RATIO, - .cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT, - - .cmd1csratio = MT41J512M8RH125_RATIO, - .cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT, - - .cmd2csratio = MT41J512M8RH125_RATIO, - .cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT, -}; - -static const struct cmd_control ddr3_icev2_cmd_ctrl_data = { - .cmd0csratio = MT41J128MJT125_RATIO_400MHz, - .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT_400MHz, - - .cmd1csratio = MT41J128MJT125_RATIO_400MHz, - .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT_400MHz, - - .cmd2csratio = MT41J128MJT125_RATIO_400MHz, - .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT_400MHz, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = MT41J128MJT125_EMIF_SDCFG, - .ref_ctrl = MT41J128MJT125_EMIF_SDREF, - .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, - .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, - .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, - .zq_config = MT41J128MJT125_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -static struct emif_regs ddr3_beagleblack_emif_reg_data = { - .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, - .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, - .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, - .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, - .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, - .ocp_config = EMIF_OCP_CONFIG_BEAGLEBONE_BLACK, - .zq_config = MT41K256M16HA125E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, -}; - -static struct emif_regs ddr3_evm_emif_reg_data = { - .sdram_config = MT41J512M8RH125_EMIF_SDCFG, - .ref_ctrl = MT41J512M8RH125_EMIF_SDREF, - .sdram_tim1 = MT41J512M8RH125_EMIF_TIM1, - .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, - .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, - .ocp_config = EMIF_OCP_CONFIG_AM335X_EVM, - .zq_config = MT41J512M8RH125_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -static struct emif_regs ddr3_icev2_emif_reg_data = { - .sdram_config = MT41J128MJT125_EMIF_SDCFG_400MHz, - .ref_ctrl = MT41J128MJT125_EMIF_SDREF_400MHz, - .sdram_tim1 = MT41J128MJT125_EMIF_TIM1_400MHz, - .sdram_tim2 = MT41J128MJT125_EMIF_TIM2_400MHz, - .sdram_tim3 = MT41J128MJT125_EMIF_TIM3_400MHz, - .zq_config = MT41J128MJT125_ZQ_CFG_400MHz, - .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY_400MHz | - PHY_EN_DYN_PWRDN, -}; - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ -#ifdef CONFIG_SPL_SERIAL_SUPPORT - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; -#endif - -#ifdef CONFIG_SPL_ENV_SUPPORT - env_init(); - env_load(); - if (env_get_yesno("boot_os") != 1) - return 1; -#endif - - return 0; -} -#endif - -const struct dpll_params *get_dpll_ddr_params(void) -{ - int ind = get_sys_clk_index(); - - if (board_is_evm_sk()) - return &dpll_ddr3_303MHz[ind]; - else if (board_is_pb() || board_is_bone_lt() || board_is_icev2()) - return &dpll_ddr3_400MHz[ind]; - else if (board_is_evm_15_or_later()) - return &dpll_ddr3_303MHz[ind]; - else - return &dpll_ddr2_266MHz[ind]; -} - -static u8 bone_not_connected_to_ac_power(void) -{ - if (board_is_bone()) { - uchar pmic_status_reg; - if (tps65217_reg_read(TPS65217_STATUS, - &pmic_status_reg)) - return 1; - if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) { - puts("No AC power, switching to default OPP\n"); - return 1; - } - } - return 0; -} - -const struct dpll_params *get_dpll_mpu_params(void) -{ - int ind = get_sys_clk_index(); - int freq = am335x_get_efuse_mpu_max_freq(cdev); - - if (bone_not_connected_to_ac_power()) - freq = MPUPLL_M_600; - - if (board_is_pb() || board_is_bone_lt()) - freq = MPUPLL_M_1000; - - switch (freq) { - case MPUPLL_M_1000: - return &dpll_mpu_opp[ind][5]; - case MPUPLL_M_800: - return &dpll_mpu_opp[ind][4]; - case MPUPLL_M_720: - return &dpll_mpu_opp[ind][3]; - case MPUPLL_M_600: - return &dpll_mpu_opp[ind][2]; - case MPUPLL_M_500: - return &dpll_mpu_opp100; - case MPUPLL_M_300: - return &dpll_mpu_opp[ind][0]; - } - - return &dpll_mpu_opp[ind][0]; -} - -static void scale_vcores_bone(int freq) -{ - int usb_cur_lim, mpu_vdd; - - /* - * Only perform PMIC configurations if board rev > A1 - * on Beaglebone White - */ - if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) - return; - - if (i2c_probe(TPS65217_CHIP_PM)) - return; - - /* - * On Beaglebone White we need to ensure we have AC power - * before increasing the frequency. - */ - if (bone_not_connected_to_ac_power()) - freq = MPUPLL_M_600; - - /* - * Override what we have detected since we know if we have - * a Beaglebone Black it supports 1GHz. - */ - if (board_is_pb() || board_is_bone_lt()) - freq = MPUPLL_M_1000; - - switch (freq) { - case MPUPLL_M_1000: - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; - break; - case MPUPLL_M_800: - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; - break; - case MPUPLL_M_720: - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1200MV; - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; - break; - case MPUPLL_M_600: - case MPUPLL_M_500: - case MPUPLL_M_300: - default: - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1100MV; - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; - break; - } - - if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, - TPS65217_POWER_PATH, - usb_cur_lim, - TPS65217_USB_INPUT_CUR_LIMIT_MASK)) - puts("tps65217_reg_write failure\n"); - - /* Set DCDC3 (CORE) voltage to 1.10V */ - if (tps65217_voltage_update(TPS65217_DEFDCDC3, - TPS65217_DCDC_VOLT_SEL_1100MV)) { - puts("tps65217_voltage_update failure\n"); - return; - } - - /* Set DCDC2 (MPU) voltage */ - if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { - puts("tps65217_voltage_update failure\n"); - return; - } - - /* - * Set LDO3, LDO4 output voltage to 3.3V for Beaglebone. - * Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black. - */ - if (board_is_bone()) { - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, - TPS65217_DEFLS1, - TPS65217_LDO_VOLTAGE_OUT_3_3, - TPS65217_LDO_MASK)) - puts("tps65217_reg_write failure\n"); - } else { - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, - TPS65217_DEFLS1, - TPS65217_LDO_VOLTAGE_OUT_1_8, - TPS65217_LDO_MASK)) - puts("tps65217_reg_write failure\n"); - } - - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, - TPS65217_DEFLS2, - TPS65217_LDO_VOLTAGE_OUT_3_3, - TPS65217_LDO_MASK)) - puts("tps65217_reg_write failure\n"); -} - -void scale_vcores_generic(int freq) -{ - int sil_rev, mpu_vdd; - - /* - * The GP EVM, IDK and EVM SK use a TPS65910 PMIC. For all - * MPU frequencies we support we use a CORE voltage of - * 1.10V. For MPU voltage we need to switch based on - * the frequency we are running at. - */ - if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) - return; - - /* - * Depending on MPU clock and PG we will need a different - * VDD to drive at that speed. - */ - sil_rev = readl(&cdev->deviceid) >> 28; - mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev, freq); - - /* Tell the TPS65910 to use i2c */ - tps65910_set_i2c_control(); - - /* First update MPU voltage. */ - if (tps65910_voltage_update(MPU, mpu_vdd)) - return; - - /* Second, update the CORE voltage. */ - if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_0)) - return; - -} - -void gpi2c_init(void) -{ - /* When needed to be invoked prior to BSS initialization */ - static bool first_time = true; - - if (first_time) { - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, - CONFIG_SYS_OMAP24_I2C_SLAVE); - first_time = false; - } -} - -void scale_vcores(void) -{ - int freq; - - gpi2c_init(); - freq = am335x_get_efuse_mpu_max_freq(cdev); - - if (board_is_beaglebonex()) - scale_vcores_bone(freq); - else - scale_vcores_generic(freq); -} - -void set_uart_mux_conf(void) -{ -#if CONFIG_CONS_INDEX == 1 - enable_uart0_pin_mux(); -#elif CONFIG_CONS_INDEX == 2 - enable_uart1_pin_mux(); -#elif CONFIG_CONS_INDEX == 3 - enable_uart2_pin_mux(); -#elif CONFIG_CONS_INDEX == 4 - enable_uart3_pin_mux(); -#elif CONFIG_CONS_INDEX == 5 - enable_uart4_pin_mux(); -#elif CONFIG_CONS_INDEX == 6 - enable_uart5_pin_mux(); -#endif -} - -void set_mux_conf_regs(void) -{ - enable_board_pin_mux(); -} - -const struct ctrl_ioregs ioregs_evmsk = { - .cm0ioctl = MT41J128MJT125_IOCTRL_VALUE, - .cm1ioctl = MT41J128MJT125_IOCTRL_VALUE, - .cm2ioctl = MT41J128MJT125_IOCTRL_VALUE, - .dt0ioctl = MT41J128MJT125_IOCTRL_VALUE, - .dt1ioctl = MT41J128MJT125_IOCTRL_VALUE, -}; - -const struct ctrl_ioregs ioregs_bonelt = { - .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -}; - -const struct ctrl_ioregs ioregs_evm15 = { - .cm0ioctl = MT41J512M8RH125_IOCTRL_VALUE, - .cm1ioctl = MT41J512M8RH125_IOCTRL_VALUE, - .cm2ioctl = MT41J512M8RH125_IOCTRL_VALUE, - .dt0ioctl = MT41J512M8RH125_IOCTRL_VALUE, - .dt1ioctl = MT41J512M8RH125_IOCTRL_VALUE, -}; - -const struct ctrl_ioregs ioregs = { - .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, - .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, - .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, - .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, - .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -}; - -void sdram_init(void) -{ - if (board_is_evm_sk()) { - /* - * EVM SK 1.2A and later use gpio0_7 to enable DDR3. - * This is safe enough to do on older revs. - */ - gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); - gpio_direction_output(GPIO_DDR_VTT_EN, 1); - } - - if (board_is_icev2()) { - gpio_request(ICE_GPIO_DDR_VTT_EN, "ddr_vtt_en"); - gpio_direction_output(ICE_GPIO_DDR_VTT_EN, 1); - } - - if (board_is_evm_sk()) - config_ddr(303, &ioregs_evmsk, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); - else if (board_is_pb() || board_is_bone_lt()) - config_ddr(400, &ioregs_bonelt, - &ddr3_beagleblack_data, - &ddr3_beagleblack_cmd_ctrl_data, - &ddr3_beagleblack_emif_reg_data, 0); - else if (board_is_evm_15_or_later()) - config_ddr(303, &ioregs_evm15, &ddr3_evm_data, - &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0); - else if (board_is_icev2()) - config_ddr(400, &ioregs_evmsk, &ddr3_icev2_data, - &ddr3_icev2_cmd_ctrl_data, &ddr3_icev2_emif_reg_data, - 0); - else if (board_is_gp_evm()) - config_ddr(266, &ioregs, &ddr2_data, - &ddr2_cmd_ctrl_data, &ddr2_evm_emif_reg_data, 0); - else - config_ddr(266, &ioregs, &ddr2_data, - &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); -} -#endif - -#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))) -static void request_and_set_gpio(int gpio, char *name, int val) -{ - int ret; - - ret = gpio_request(gpio, name); - if (ret < 0) { - printf("%s: Unable to request %s\n", __func__, name); - return; - } - - ret = gpio_direction_output(gpio, 0); - if (ret < 0) { - printf("%s: Unable to set %s as output\n", __func__, name); - goto err_free_gpio; - } - - gpio_set_value(gpio, val); - - return; - -err_free_gpio: - gpio_free(gpio); -} - -#define REQUEST_AND_SET_GPIO(N) request_and_set_gpio(N, #N, 1); -#define REQUEST_AND_CLR_GPIO(N) request_and_set_gpio(N, #N, 0); - -/** - * RMII mode on ICEv2 board needs 50MHz clock. Given the clock - * synthesizer With a capacitor of 18pF, and 25MHz input clock cycle - * PLL1 gives an output of 100MHz. So, configuring the div2/3 as 2 to - * give 50MHz output for Eth0 and 1. - */ -static struct clk_synth cdce913_data = { - .id = 0x81, - .capacitor = 0x90, - .mux = 0x6d, - .pdiv2 = 0x2, - .pdiv3 = 0x2, -}; -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_CONTROL) && \ - defined(CONFIG_DM_ETH) && defined(CONFIG_DRIVER_TI_CPSW) - -#define MAX_CPSW_SLAVES 2 - -/* At the moment, we do not want to stop booting for any failures here */ -int ft_board_setup(void *fdt, bd_t *bd) -{ - const char *slave_path, *enet_name; - int enetnode, slavenode, phynode; - struct udevice *ethdev; - char alias[16]; - u32 phy_id[2]; - int phy_addr; - int i, ret; - - /* phy address fixup needed only on beagle bone family */ - if (!board_is_beaglebonex()) - goto done; - - for (i = 0; i < MAX_CPSW_SLAVES; i++) { - sprintf(alias, "ethernet%d", i); - - slave_path = fdt_get_alias(fdt, alias); - if (!slave_path) - continue; - - slavenode = fdt_path_offset(fdt, slave_path); - if (slavenode < 0) - continue; - - enetnode = fdt_parent_offset(fdt, slavenode); - enet_name = fdt_get_name(fdt, enetnode, NULL); - - ethdev = eth_get_dev_by_name(enet_name); - if (!ethdev) - continue; - - phy_addr = cpsw_get_slave_phy_addr(ethdev, i); - - /* check for phy_id as well as phy-handle properties */ - ret = fdtdec_get_int_array_count(fdt, slavenode, "phy_id", - phy_id, 2); - if (ret == 2) { - if (phy_id[1] != phy_addr) { - printf("fixing up phy_id for %s, old: %d, new: %d\n", - alias, phy_id[1], phy_addr); - - phy_id[0] = cpu_to_fdt32(phy_id[0]); - phy_id[1] = cpu_to_fdt32(phy_addr); - do_fixup_by_path(fdt, slave_path, "phy_id", - phy_id, sizeof(phy_id), 0); - } - } else { - phynode = fdtdec_lookup_phandle(fdt, slavenode, - "phy-handle"); - if (phynode < 0) - continue; - - ret = fdtdec_get_int(fdt, phynode, "reg", -ENOENT); - if (ret < 0) - continue; - - if (ret != phy_addr) { - printf("fixing up phy-handle for %s, old: %d, new: %d\n", - alias, ret, phy_addr); - - fdt_setprop_u32(fdt, phynode, "reg", - cpu_to_fdt32(phy_addr)); - } - } - } - -done: - return 0; -} -#endif - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ -#if defined(CONFIG_HW_WATCHDOG) - hw_watchdog_init(); -#endif - - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -#if defined(CONFIG_NOR) || defined(CONFIG_NAND) - gpmc_init(); -#endif - -#if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))) - if (board_is_icev2()) { - int rv; - u32 reg; - - REQUEST_AND_SET_GPIO(GPIO_PR1_MII_CTRL); - /* Make J19 status available on GPIO1_26 */ - REQUEST_AND_CLR_GPIO(GPIO_MUX_MII_CTRL); - - REQUEST_AND_SET_GPIO(GPIO_FET_SWITCH_CTRL); - /* - * Both ports can be set as RMII-CPSW or MII-PRU-ETH using - * jumpers near the port. Read the jumper value and set - * the pinmux, external mux and PHY clock accordingly. - * As jumper line is overridden by PHY RX_DV pin immediately - * after bootstrap (power-up/reset), we need to sample - * it during PHY reset using GPIO rising edge detection. - */ - REQUEST_AND_SET_GPIO(GPIO_PHY_RESET); - /* Enable rising edge IRQ on GPIO0_11 and GPIO 1_26 */ - reg = readl(GPIO0_RISINGDETECT) | BIT(11); - writel(reg, GPIO0_RISINGDETECT); - reg = readl(GPIO1_RISINGDETECT) | BIT(26); - writel(reg, GPIO1_RISINGDETECT); - /* Reset PHYs to capture the Jumper setting */ - gpio_set_value(GPIO_PHY_RESET, 0); - udelay(2); /* PHY datasheet states 1uS min. */ - gpio_set_value(GPIO_PHY_RESET, 1); - - reg = readl(GPIO0_IRQSTATUSRAW) & BIT(11); - if (reg) { - writel(reg, GPIO0_IRQSTATUS1); /* clear irq */ - /* RMII mode */ - printf("ETH0, CPSW\n"); - } else { - /* MII mode */ - printf("ETH0, PRU\n"); - cdce913_data.pdiv3 = 4; /* 25MHz PHY clk */ - } - - reg = readl(GPIO1_IRQSTATUSRAW) & BIT(26); - if (reg) { - writel(reg, GPIO1_IRQSTATUS1); /* clear irq */ - /* RMII mode */ - printf("ETH1, CPSW\n"); - gpio_set_value(GPIO_MUX_MII_CTRL, 1); - } else { - /* MII mode */ - printf("ETH1, PRU\n"); - cdce913_data.pdiv2 = 4; /* 25MHz PHY clk */ - } - - /* disable rising edge IRQs */ - reg = readl(GPIO0_RISINGDETECT) & ~BIT(11); - writel(reg, GPIO0_RISINGDETECT); - reg = readl(GPIO1_RISINGDETECT) & ~BIT(26); - writel(reg, GPIO1_RISINGDETECT); - - rv = setup_clock_synthesizer(&cdce913_data); - if (rv) { - printf("Clock synthesizer setup failed %d\n", rv); - return rv; - } - - /* reset PHYs */ - gpio_set_value(GPIO_PHY_RESET, 0); - udelay(2); /* PHY datasheet states 1uS min. */ - gpio_set_value(GPIO_PHY_RESET, 1); - } -#endif - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#if !defined(CONFIG_SPL_BUILD) - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; -#endif - -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - char *name = NULL; - - if (board_is_bone_lt()) { - /* BeagleBoard.org BeagleBone Black Wireless: */ - if (!strncmp(board_ti_get_rev(), "BWA", 3)) { - name = "BBBW"; - } - /* SeeedStudio BeagleBone Green Wireless */ - if (!strncmp(board_ti_get_rev(), "GW1", 3)) { - name = "BBGW"; - } - /* BeagleBoard.org BeagleBone Blue */ - if (!strncmp(board_ti_get_rev(), "BLA", 3)) { - name = "BBBL"; - } - } - - if (board_is_bbg1()) - name = "BBG1"; - if (board_is_bben()) - name = "BBEN"; - set_board_info_env(name); - - /* - * Default FIT boot on HS devices. Non FIT images are not allowed - * on HS devices. - */ - if (get_device_type() == HS_DEVICE) - env_set("boot_fit", "1"); -#endif - -#if !defined(CONFIG_SPL_BUILD) - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (!env_get("ethaddr")) { - printf("<ethaddr> not set. Validating first E-fuse MAC\n"); - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - mac_lo = readl(&cdev->macid1l); - mac_hi = readl(&cdev->macid1h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (!env_get("eth1addr")) { - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("eth1addr", mac_addr); - } -#endif - - if (!env_get("serial#")) { - char *board_serial = env_get("board_serial"); - char *ethaddr = env_get("ethaddr"); - - if (!board_serial || !strncmp(board_serial, "unknown", 7)) - env_set("serial#", ethaddr); - else - env_set("serial#", board_serial); - } - - return 0; -} -#endif - -#ifndef CONFIG_DM_ETH - -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; -#endif - -#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) &&\ - defined(CONFIG_SPL_BUILD)) || \ - ((defined(CONFIG_DRIVER_TI_CPSW) || \ - defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ - !defined(CONFIG_SPL_BUILD)) - -/* - * This function will: - * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr - * in the environment - * Perform fixups to the PHY present on certain boards. We only need this - * function in: - * - SPL with either CPSW or USB ethernet support - * - Full U-Boot, with either CPSW or USB ethernet - * Build in only these cases to avoid warnings about unused variables - * when we build an SPL that has neither option but full U-Boot will. - */ -int board_eth_init(bd_t *bis) -{ - int rv, n = 0; -#if defined(CONFIG_USB_ETHER) && \ - (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - /* - * use efuse mac address for USB ethernet as we know that - * both CPSW and USB ethernet will never be active at the same time - */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; -#endif - - -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - -#ifdef CONFIG_DRIVER_TI_CPSW - if (board_is_bone() || board_is_bone_lt() || board_is_bben() || - board_is_idk()) { - writel(MII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_MII; - } else if (board_is_icev2()) { - writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII; - cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII; - cpsw_slaves[0].phy_addr = 1; - cpsw_slaves[1].phy_addr = 3; - } else { - writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_RGMII; - } - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; -#endif - - /* - * - * CPSW RGMII Internal Delay Mode is not supported in all PVT - * operating points. So we must set the TX clock delay feature - * in the AR8051 PHY. Since we only support a single ethernet - * device in U-Boot, we only do this for the first instance. - */ -#define AR8051_PHY_DEBUG_ADDR_REG 0x1d -#define AR8051_PHY_DEBUG_DATA_REG 0x1e -#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 -#define AR8051_RGMII_TX_CLK_DLY 0x100 - - if (board_is_evm_sk() || board_is_gp_evm() || board_is_bben()) { - const char *devname; - devname = miiphy_get_current_dev(); - - miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, - AR8051_DEBUG_RGMII_CLK_DLY_REG); - miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, - AR8051_RGMII_TX_CLK_DLY); - } -#endif -#if defined(CONFIG_USB_ETHER) && \ - (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER)) - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("usbnet_devaddr", mac_addr); - - rv = usb_eth_initialize(bis); - if (rv < 0) - printf("Error %d registering USB_ETHER\n", rv); - else - n += rv; -#endif - return n; -} -#endif - -#endif /* CONFIG_DM_ETH */ - -#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ - if (board_is_gp_evm() && !strcmp(name, "am335x-evm")) - return 0; - else if (board_is_bone() && !strcmp(name, "am335x-bone")) - return 0; - else if (board_is_bone_lt() && !strcmp(name, "am335x-boneblack")) - return 0; - else if (board_is_pb() && !strcmp(name, "am335x-pocketbeagle")) - return 0; - else if (board_is_evm_sk() && !strcmp(name, "am335x-evmsk")) - return 0; - else if (board_is_bbg1() && !strcmp(name, "am335x-bonegreen")) - return 0; - else if (board_is_icev2() && !strcmp(name, "am335x-icev2")) - return 0; - else - return -1; -} -#endif - -#ifdef CONFIG_TI_SECURE_DEVICE -void board_fit_image_post_process(void **p_image, size_t *p_size) -{ - secure_boot_verify_image(p_image, p_size); -} -#endif - -#if !CONFIG_IS_ENABLED(OF_CONTROL) -static const struct omap_hsmmc_plat am335x_mmc0_platdata = { - .base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE, - .cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_4BIT, - .cfg.f_min = 400000, - .cfg.f_max = 52000000, - .cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195, - .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, -}; - -U_BOOT_DEVICE(am335x_mmc0) = { - .name = "omap_hsmmc", - .platdata = &am335x_mmc0_platdata, -}; - -static const struct omap_hsmmc_plat am335x_mmc1_platdata = { - .base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE, - .cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_8BIT, - .cfg.f_min = 400000, - .cfg.f_max = 52000000, - .cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195, - .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, -}; - -U_BOOT_DEVICE(am335x_mmc1) = { - .name = "omap_hsmmc", - .platdata = &am335x_mmc1_platdata, -}; -#endif diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h deleted file mode 100644 index 48df914af96..00000000000 --- a/board/ti/am335x/board.h +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * TI AM335x boards information header - * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/** - * AM335X (EMIF_4D) EMIF REG_COS_COUNT_1, REG_COS_COUNT_2, and - * REG_PR_OLD_COUNT values to avoid LCDC DMA FIFO underflows and Frame - * Synchronization Lost errors. The values are the biggest that work - * reliably with offered video modes and the memory subsystem on the - * boards. These register have are briefly documented in "7.3.3.5.2 - * Command Starvation" section of AM335x TRM. The REG_COS_COUNT_1 and - * REG_COS_COUNT_2 do not have any effect on current versions of - * AM335x. - */ -#define EMIF_OCP_CONFIG_BEAGLEBONE_BLACK 0x00141414 -#define EMIF_OCP_CONFIG_AM335X_EVM 0x003d3d3d - -static inline int board_is_bone(void) -{ - return board_ti_is("A335BONE"); -} - -static inline int board_is_bone_lt(void) -{ - return board_ti_is("A335BNLT"); -} - -static inline int board_is_pb(void) -{ - return board_ti_is("A335PBGL"); -} - -static inline int board_is_bbg1(void) -{ - return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4); -} - -static inline int board_is_bben(void) -{ - return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "SE", 2); -} - -static inline int board_is_beaglebonex(void) -{ - return board_is_pb() || board_is_bone() || board_is_bone_lt() || - board_is_bbg1() || board_is_bben(); -} - -static inline int board_is_evm_sk(void) -{ - return board_ti_is("A335X_SK"); -} - -static inline int board_is_idk(void) -{ - return !strncmp(board_ti_get_config(), "SKU#02", 6); -} - -static inline int board_is_gp_evm(void) -{ - return board_ti_is("A33515BB"); -} - -static inline int board_is_evm_15_or_later(void) -{ - return (board_is_gp_evm() && - strncmp("1.5", board_ti_get_rev(), 3) <= 0); -} - -static inline int board_is_icev2(void) -{ - return board_ti_is("A335_ICE") && !strncmp("2", board_ti_get_rev(), 1); -} - -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_uart1_pin_mux(void); -void enable_uart2_pin_mux(void); -void enable_uart3_pin_mux(void); -void enable_uart4_pin_mux(void); -void enable_uart5_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -#endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c deleted file mode 100644 index 41333f93f40..00000000000 --- a/board/ti/am335x/mux.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * mux.c - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <common.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/hardware.h> -#include <asm/arch/mux.h> -#include <asm/io.h> -#include <i2c.h> -#include "../common/board_detect.h" -#include "board.h" - -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ - {-1}, -}; - -static struct module_pin_mux uart1_pin_mux[] = { - {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ - {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ - {-1}, -}; - -static struct module_pin_mux uart2_pin_mux[] = { - {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ - {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ - {-1}, -}; - -static struct module_pin_mux uart3_pin_mux[] = { - {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ - {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ - {-1}, -}; - -static struct module_pin_mux uart4_pin_mux[] = { - {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ - {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ - {-1}, -}; - -static struct module_pin_mux uart5_pin_mux[] = { - {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ - {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ - {-1}, -}; - -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ - {OFFSET(spi0_cs1), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* GPIO0_6 */ - {-1}, -}; - -static struct module_pin_mux mmc0_no_cd_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ - {-1}, -}; - -static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ - {-1}, -}; - -static struct module_pin_mux mmc1_pin_mux[] = { - {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ - {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ - {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ - {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ - {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ - {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ - {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ - {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_CD */ - {-1}, -}; - -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - -static struct module_pin_mux i2c1_pin_mux[] = { - {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - -static struct module_pin_mux spi0_pin_mux[] = { - {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ - {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | - PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ - {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ - {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | - PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ - {-1}, -}; - -static struct module_pin_mux gpio0_7_pin_mux[] = { - {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */ - {-1}, -}; - -static struct module_pin_mux gpio0_18_pin_mux[] = { - {OFFSET(usb0_drvvbus), (MODE(7) | PULLUDEN)}, /* GPIO0_18 */ - {-1}, -}; - -static struct module_pin_mux rgmii1_pin_mux[] = { - {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ - {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ - {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ - {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ - {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ - {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ - {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ - {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ - {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ - {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ - {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ - {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - -static struct module_pin_mux mii1_pin_mux[] = { - {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ - {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ - {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ - {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ - {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ - {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ - {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ - {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ - {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ - {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ - {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - -static struct module_pin_mux rmii1_pin_mux[] = { - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* MII1_CRS */ - {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* MII1_RXERR */ - {OFFSET(mii1_txen), MODE(1)}, /* MII1_TXEN */ - {OFFSET(mii1_txd1), MODE(1)}, /* MII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(1)}, /* MII1_TXD0 */ - {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* MII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* MII1_RXD0 */ - {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ - {-1}, -}; - -#ifdef CONFIG_NAND -static struct module_pin_mux nand_pin_mux[] = { - {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */ - {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */ - {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */ - {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */ - {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */ - {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */ - {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */ - {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */ -#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT - {OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8 */ - {OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9 */ - {OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */ - {OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */ - {OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */ - {OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */ - {OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */ - {OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */ -#endif - {OFFSET(gpmc_wait0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* nWAIT */ - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, /* nWP */ - {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* nCS */ - {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, /* WEN */ - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, /* OE */ - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, /* ADV_ALE */ - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, /* BE_CLE */ - {-1}, -}; -#elif defined(CONFIG_NOR) -static struct module_pin_mux bone_norcape_pin_mux[] = { - {OFFSET(gpmc_a0), MODE(0) | PULLUDDIS}, /* NOR_A0 */ - {OFFSET(gpmc_a1), MODE(0) | PULLUDDIS}, /* NOR_A1 */ - {OFFSET(gpmc_a2), MODE(0) | PULLUDDIS}, /* NOR_A2 */ - {OFFSET(gpmc_a3), MODE(0) | PULLUDDIS}, /* NOR_A3 */ - {OFFSET(gpmc_a4), MODE(0) | PULLUDDIS}, /* NOR_A4 */ - {OFFSET(gpmc_a5), MODE(0) | PULLUDDIS}, /* NOR_A5 */ - {OFFSET(gpmc_a6), MODE(0) | PULLUDDIS}, /* NOR_A6 */ - {OFFSET(gpmc_a7), MODE(0) | PULLUDDIS}, /* NOR_A7 */ - {OFFSET(gpmc_ad0), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD0 */ - {OFFSET(gpmc_ad1), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD1 */ - {OFFSET(gpmc_ad2), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD2 */ - {OFFSET(gpmc_ad3), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD3 */ - {OFFSET(gpmc_ad4), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD4 */ - {OFFSET(gpmc_ad5), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD5 */ - {OFFSET(gpmc_ad6), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD6 */ - {OFFSET(gpmc_ad7), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD7 */ - {OFFSET(gpmc_ad8), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD8 */ - {OFFSET(gpmc_ad9), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD9 */ - {OFFSET(gpmc_ad10), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD10 */ - {OFFSET(gpmc_ad11), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD11 */ - {OFFSET(gpmc_ad12), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD12 */ - {OFFSET(gpmc_ad13), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD13 */ - {OFFSET(gpmc_ad14), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD14 */ - {OFFSET(gpmc_ad15), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD15 */ - {OFFSET(gpmc_csn0), MODE(0) | PULLUDEN | PULLUP_EN}, /* CE */ - {OFFSET(gpmc_advn_ale), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* ALE */ - {OFFSET(gpmc_oen_ren), MODE(0) | PULLUDEN | PULLDOWN_EN},/* OEn_REN */ - {OFFSET(gpmc_be0n_cle), MODE(0) | PULLUDEN | PULLDOWN_EN},/* unused */ - {OFFSET(gpmc_wen), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* WEN */ - {OFFSET(gpmc_wait0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE},/*WAIT*/ - {-1}, -}; -#endif - -static struct module_pin_mux uart3_icev2_pin_mux[] = { - {OFFSET(mii1_rxd3), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ - {OFFSET(mii1_rxd2), MODE(1) | PULLUDEN}, /* UART3_TXD */ - {-1}, -}; - -#if defined(CONFIG_NOR_BOOT) -void enable_norboot_pin_mux(void) -{ - configure_module_pin_mux(bone_norcape_pin_mux); -} -#endif - -void enable_uart0_pin_mux(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void enable_uart1_pin_mux(void) -{ - configure_module_pin_mux(uart1_pin_mux); -} - -void enable_uart2_pin_mux(void) -{ - configure_module_pin_mux(uart2_pin_mux); -} - -void enable_uart3_pin_mux(void) -{ - configure_module_pin_mux(uart3_pin_mux); -} - -void enable_uart4_pin_mux(void) -{ - configure_module_pin_mux(uart4_pin_mux); -} - -void enable_uart5_pin_mux(void) -{ - configure_module_pin_mux(uart5_pin_mux); -} - -void enable_i2c0_pin_mux(void) -{ - configure_module_pin_mux(i2c0_pin_mux); -} - -/* - * The AM335x GP EVM, if daughter card(s) are connected, can have 8 - * different profiles. These profiles determine what peripherals are - * valid and need pinmux to be configured. - */ -#define PROFILE_NONE 0x0 -#define PROFILE_0 (1 << 0) -#define PROFILE_1 (1 << 1) -#define PROFILE_2 (1 << 2) -#define PROFILE_3 (1 << 3) -#define PROFILE_4 (1 << 4) -#define PROFILE_5 (1 << 5) -#define PROFILE_6 (1 << 6) -#define PROFILE_7 (1 << 7) -#define PROFILE_MASK 0x7 -#define PROFILE_ALL 0xFF - -/* CPLD registers */ -#define I2C_CPLD_ADDR 0x35 -#define CFG_REG 0x10 - -static unsigned short detect_daughter_board_profile(void) -{ - unsigned short val; - - if (i2c_probe(I2C_CPLD_ADDR)) - return PROFILE_NONE; - - if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2)) - return PROFILE_NONE; - - return (1 << (val & PROFILE_MASK)); -} - -void enable_board_pin_mux(void) -{ - /* Do board-specific muxes. */ - if (board_is_bone()) { - /* Beaglebone pinmux */ - configure_module_pin_mux(mii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); -#if defined(CONFIG_NAND) - configure_module_pin_mux(nand_pin_mux); -#elif defined(CONFIG_NOR) - configure_module_pin_mux(bone_norcape_pin_mux); -#else - configure_module_pin_mux(mmc1_pin_mux); -#endif - } else if (board_is_gp_evm()) { - /* General Purpose EVM */ - unsigned short profile = detect_daughter_board_profile(); - configure_module_pin_mux(rgmii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); - /* In profile #2 i2c1 and spi0 conflict. */ - if (profile & ~PROFILE_2) - configure_module_pin_mux(i2c1_pin_mux); - /* Profiles 2 & 3 don't have NAND */ -#ifdef CONFIG_NAND - if (profile & ~(PROFILE_2 | PROFILE_3)) - configure_module_pin_mux(nand_pin_mux); -#endif - else if (profile == PROFILE_2) { - configure_module_pin_mux(mmc1_pin_mux); - configure_module_pin_mux(spi0_pin_mux); - } - } else if (board_is_idk()) { - /* Industrial Motor Control (IDK) */ - configure_module_pin_mux(mii1_pin_mux); - configure_module_pin_mux(mmc0_no_cd_pin_mux); - } else if (board_is_evm_sk()) { - /* Starter Kit EVM */ - configure_module_pin_mux(i2c1_pin_mux); - configure_module_pin_mux(gpio0_7_pin_mux); - configure_module_pin_mux(rgmii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux_sk_evm); - } else if (board_is_bone_lt()) { - if (board_is_bben()) { - /* SanCloud Beaglebone LT Enhanced pinmux */ - configure_module_pin_mux(rgmii1_pin_mux); - } else { - /* Beaglebone LT pinmux */ - configure_module_pin_mux(mii1_pin_mux); - } - /* Beaglebone LT pinmux */ - configure_module_pin_mux(mii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); -#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT) - configure_module_pin_mux(nand_pin_mux); -#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT) - configure_module_pin_mux(bone_norcape_pin_mux); -#else - configure_module_pin_mux(mmc1_pin_mux); -#endif - } else if (board_is_pb()) { - configure_module_pin_mux(mii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); - } else if (board_is_icev2()) { - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(gpio0_18_pin_mux); - configure_module_pin_mux(uart3_icev2_pin_mux); - configure_module_pin_mux(rmii1_pin_mux); - configure_module_pin_mux(spi0_pin_mux); - } else { - /* Unknown board. We might still be able to boot. */ - puts("Bad EEPROM or unknown board, cannot configure pinmux."); - } -} diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds deleted file mode 100644 index 03c1d5f73b3..00000000000 --- a/board/ti/am335x/u-boot.lds +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <ga...@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - *(.__image_copy_start) - *(.vectors) - CPUDIR/start.o (.text*) - board/ti/am335x/built-in.o (.text*) - } - - /* This needs to come before *(.text*) */ - .__efi_runtime_start : { - *(.__efi_runtime_start) - } - - .efi_runtime : { - *(.text.efi_runtime*) - *(.rodata.efi_runtime*) - *(.data.efi_runtime*) - } - - .__efi_runtime_stop : { - *(.__efi_runtime_stop) - } - - .text_rest : - { - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN(4); - - .efi_runtime_rel_start : - { - *(.__efi_runtime_rel_start) - } - - .efi_runtime_rel : { - *(.rel*.efi_runtime) - *(.rel*.efi_runtime.*) - } - - .efi_runtime_rel_stop : - { - *(.__efi_runtime_rel_stop) - } - - . = ALIGN(4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - .hash : { *(.hash*) } - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - /* - * Deprecated: this MMU section is used by pxa at present but - * should not be used by new boards/CPUs. - */ - . = ALIGN(4096); - .mmutable : { - *(.mmutable) - } - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .gnu.hash : { *(.gnu.hash) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig deleted file mode 100644 index 90ccf9adfe1..00000000000 --- a/configs/am335x_boneblack_defconfig +++ /dev/null @@ -1,51 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SPL=y -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_TFTP=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=1 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig deleted file mode 100644 index d625599461f..00000000000 --- a/configs/am335x_boneblack_vboot_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT_SIGNATURE=y -CONFIG_FIT_VERBOSE=y -CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SPL=y -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_BLK is not set -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DM_ETH=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig deleted file mode 100644 index b6cd49a469f..00000000000 --- a/configs/am335x_evm_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SPL_LOAD_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00080000 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" -CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2" -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -# CONFIG_BLK is not set -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_NAND=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_DM_I2C=y -CONFIG_MISC=y -CONFIG_DM_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DM_ETH=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_TI=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_DYNAMIC_CRC_TABLE=y -CONFIG_RSA=y -CONFIG_LZO=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig deleted file mode 100644 index 54dc7dff780..00000000000 --- a/configs/am335x_evm_nor_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_NOR=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00080000 -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_NAND=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig deleted file mode 100644 index 5d7ccf0c5a7..00000000000 --- a/configs/am335x_evm_norboot_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SYS_THUMB_BUILD is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x08000000 -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_NOR=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NOR_BOOT=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:512k(u-boot),128k(u-boot-env1),128k(u-boot-env2),4m(kernel),-(rootfs)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_MTD_DEVICE=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00" -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig deleted file mode 100644 index 10a935f0c0b..00000000000 --- a/configs/am335x_evm_spiboot_defconfig +++ /dev/null @@ -1,48 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" -CONFIG_SPI_BOOT=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_SPI_LOAD=y -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=m25p80-flash.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=m25p80-flash.0:128k(SPL),512k(u-boot),128k(u-boot-env1),128k(u-boot-env2),3464k(kernel),-(rootfs)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD_DEVICE=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig deleted file mode 100644 index ec72538ddc0..00000000000 --- a/configs/am335x_evm_usbspl_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_TI_COMMON_CMD_OPTIONS=y -CONFIG_AM33XX=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_ANDROID_BOOT_IMAGE is not set -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_CONSOLE_MUX=y -CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_MUSB_NEW_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_NET_SUPPORT=y -CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL" -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_USB_GADGET_SUPPORT=y -CONFIG_SPL_USB_ETHER=y -# CONFIG_SPL_YMODEM_SUPPORT is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00080000 -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_NETCONSOLE=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DFU_MMC=y -CONFIG_DFU_NAND=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h deleted file mode 100644 index 5d5b09bbd1e..00000000000 --- a/include/configs/am335x_evm.h +++ /dev/null @@ -1,343 +0,0 @@ -/* - * am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_AM335X_EVM_H -#define __CONFIG_AM335X_EVM_H - -#include <configs/ti_am335x_common.h> -#include <linux/sizes.h> - -#ifndef CONFIG_SPL_BUILD -# define CONFIG_TIMESTAMP -#endif - -#define CONFIG_SYS_BOOTM_LEN SZ_16M - -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -/* Custom script for NOR */ -#define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds" - -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE SZ_128K - -#ifdef CONFIG_NAND -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ - "nand read ${loadaddr} NAND.kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#else -#define NANDARGS "" -#endif - -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance"; "\ - "setenv bootpart " #instance":2 ; "\ - "run mmcboot\0" - -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel "=" \ - "run nandboot\0" - -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#if CONFIG_IS_ENABLED(CMD_PXE) -# define BOOT_TARGET_PXE(func) func(PXE, pxe, na) -#else -# define BOOT_TARGET_PXE(func) -#endif - -#if CONFIG_IS_ENABLED(CMD_DHCP) -# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na) -#else -# define BOOT_TARGET_DHCP(func) -#endif - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(MMC, mmc, 1) \ - func(LEGACY_MMC, legacy_mmc, 1) \ - func(NAND, nand, 0) \ - BOOT_TARGET_PXE(func) \ - BOOT_TARGET_DHCP(func) - -#include <config_distro_bootcmd.h> - -#ifndef CONFIG_SPL_BUILD -#include <environment/ti/dfu.h> -#include <environment/ti/mmc.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=undefined\0" \ - "console=ttyO0,115200n8\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=bootloader,start=384K,size=1792K," \ - "uuid=${uuid_gpt_bootloader};" \ - "name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ - "ramroot=/dev/ram0 rw\0" \ - "ramrootfstype=ext2\0" \ - "spiroot=/dev/mtdblock4 rw\0" \ - "spirootfstype=jffs2\0" \ - "spisrcaddr=0xe0000\0" \ - "spiimgsize=0x362000\0" \ - "spibusno=0\0" \ - "spiargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${spiroot} " \ - "rootfstype=${spirootfstype}\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "spiboot=echo Booting from spi ...; " \ - "run spiargs; " \ - "sf probe ${spibusno}:0; " \ - "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ - "bootz ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ - "findfdt="\ - "if test $board_name = A335BONE; then " \ - "setenv fdtfile am335x-bone.dtb; fi; " \ - "if test $board_name = A335BNLT; then " \ - "setenv fdtfile am335x-boneblack.dtb; fi; " \ - "if test $board_name = A335PBGL; then " \ - "setenv fdtfile am335x-pocketbeagle.dtb; fi; " \ - "if test $board_name = BBBW; then " \ - "setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \ - "if test $board_name = BBG1; then " \ - "setenv fdtfile am335x-bonegreen.dtb; fi; " \ - "if test $board_name = BBGW; then " \ - "setenv fdtfile am335x-bonegreen-wireless.dtb; fi; " \ - "if test $board_name = BBBL; then " \ - "setenv fdtfile am335x-boneblue.dtb; fi; " \ - "if test $board_name = BBEN; then " \ - "setenv fdtfile am335x-sancloud-bbe.dtb; fi; " \ - "if test $board_name = A33515BB; then " \ - "setenv fdtfile am335x-evm.dtb; fi; " \ - "if test $board_name = A335X_SK; then " \ - "setenv fdtfile am335x-evmsk.dtb; fi; " \ - "if test $board_name = A335_ICE; then " \ - "setenv fdtfile am335x-icev2.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ - "init_console=" \ - "if test $board_name = A335_ICE; then "\ - "setenv console ttyO3,115200n8;" \ - "else " \ - "setenv console ttyO0,115200n8;" \ - "fi;\0" \ - NANDARGS \ - NETARGS \ - DFUARGS \ - BOOTENV -#endif - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* PMIC support */ -#define CONFIG_POWER_TPS65217 -#define CONFIG_POWER_TPS65910 - -/* SPL */ -#ifndef CONFIG_NOR_BOOT -/* Bootcount using the RTC block */ -#define CONFIG_SYS_BOOTCOUNT_BE - -/* USB gadget RNDIS */ -#endif - -#ifdef CONFIG_NAND -/* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -/* NAND: driver related configs */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 -/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif -#endif /* !CONFIG_NAND */ - -/* - * For NOR boot, we must set this to the start of where NOR is mapped - * in memory. - */ - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#undef CONFIG_DM_USB -#endif - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER) -/* Remove other SPL modes. */ -/* disable host part of MUSB in SPL */ -/* disable EFI partitions and partition UUID support */ -#endif - -/* USB Device Firmware Update support */ -#ifndef CONFIG_SPL_BUILD -#define DFUARGS \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_NAND -#endif - -/* - * Default to using SPI for environment, etc. - * 0x000000 - 0x020000 : SPL (128KiB) - * 0x020000 - 0x0A0000 : U-Boot (512KiB) - * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) - * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) - * 0x0E0000 - 0x442000 : Linux Kernel - * 0x442000 - 0x800000 : Userland - */ -#if defined(CONFIG_SPI_BOOT) -/* SPL related */ -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 - -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ -#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ -#elif defined(CONFIG_EMMC_BOOT) -#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 0 -#define CONFIG_ENV_OFFSET 0x260000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_SYS_MMC_MAX_DEVICE 2 -#elif defined(CONFIG_NOR_BOOT) -#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ -#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ -#elif defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_OFFSET 0x001c0000 -#define CONFIG_ENV_OFFSET_REDUND 0x001e0000 -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#endif - -/* SPI flash. */ -#define CONFIG_SF_DEFAULT_SPEED 24000000 - -/* Network. */ -#define CONFIG_PHY_SMSC -/* Enable Atheros phy driver */ -#define CONFIG_PHY_ATHEROS - -/* - * NOR Size = 16 MiB - * Number of Sectors/Blocks = 128 - * Sector Size = 128 KiB - * Word length = 16 bits - * Default layout: - * 0x000000 - 0x07FFFF : U-Boot (512 KiB) - * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) - * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) - * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) - * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) - */ -#if defined(CONFIG_NOR) -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#endif /* NOR support */ - -#ifdef CONFIG_DRIVER_TI_CPSW -#define CONFIG_CLOCK_SYNTHESIZER -#define CLK_SYNTHESIZER_I2C_ADDR 0x65 -#endif - -#endif /* ! __CONFIG_AM335X_EVM_H */ -- 2.19.1.1215.g8438c0b245-goog _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
