Hi, On 12 October 2018 at 01:00, Ryder Lee <ryder....@mediatek.com> wrote: > From: Weijie Gao <weijie....@mediatek.com> > > This adds a general board file based on MT7623 SoCs from MediaTek. > > As this u-boot is loaded by preloader, there is no low level > initializtion codes. > > Signed-off-by: Weijie Gao <weijie....@mediatek.com> > Signed-off-by: Ryder Lee <ryder....@mediatek.com> > Tested-by: Matthias Brugger <matthias....@gmail.com> > --- > arch/arm/mach-mediatek/Kconfig | 8 +++ > arch/arm/mach-mediatek/Makefile | 1 + > arch/arm/mach-mediatek/mt7623/Makefile | 4 ++ > arch/arm/mach-mediatek/mt7623/init.c | 54 +++++++++++++++ > arch/arm/mach-mediatek/mt7623/lowlevel_init.S | 22 ++++++ > arch/arm/mach-mediatek/mt7623/preloader.h | 99 > +++++++++++++++++++++++++++ > board/mediatek/mt7623/Kconfig | 13 ++++ > board/mediatek/mt7623/MAINTAINERS | 7 ++ > board/mediatek/mt7623/Makefile | 3 + > board/mediatek/mt7623/mt7623_rfb.c | 16 +++++ > configs/mt7623n_bpir2_defconfig | 53 ++++++++++++++ > include/configs/mt7623.h | 61 +++++++++++++++++ > 12 files changed, 341 insertions(+) > create mode 100644 arch/arm/mach-mediatek/mt7623/Makefile > create mode 100644 arch/arm/mach-mediatek/mt7623/init.c > create mode 100644 arch/arm/mach-mediatek/mt7623/lowlevel_init.S > create mode 100644 arch/arm/mach-mediatek/mt7623/preloader.h > create mode 100644 board/mediatek/mt7623/Kconfig > create mode 100644 board/mediatek/mt7623/MAINTAINERS > create mode 100644 board/mediatek/mt7623/Makefile > create mode 100644 board/mediatek/mt7623/mt7623_rfb.c > create mode 100644 configs/mt7623n_bpir2_defconfig > create mode 100644 include/configs/mt7623.h >
There is a new SPL handoff and bloblist feature that I hope will land in the next release. Can you please look at using this instead of an SoC-specififc mechanism? See u-boot-dm/spl-working Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot