Hi Bin, On Thu, 2018-10-04 at 15:01 +0800, Bin Meng wrote: > Hi Lukas, > > On Thu, Oct 4, 2018 at 12:45 AM Auer, Lukas > <lukas.a...@aisec.fraunhofer.de> wrote: > > > > Hi Bin, > > > > On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote: > > > This series adds QEMU RISC-V 'virt' board target support, with > > > the > > > hope of helping people easily test U-Boot on RISC-V. > > > > > > Some existing RISC-V codes have been changed to make it easily to > > > support new targets. Some spotted coding style issues are fixed. > > > > > > This series is available at u-boot-x86/riscv-working for testing. > > > > > > Changes in v3: > > > - net patch to print the relocation address in cmd 'bdinfo' > > > - new patch to imply DM support for some common drivers > > > - reword the reset message a little, and call hang() in the end > > > > > > Changes in v2: > > > - Change Linux kernel entry parameters' type to support 32/64 bit > > > - new patch to remove CSR read/write defines in encoding.h > > > - new patch to pass mhartid CSR value to kernel > > > - new patch to move do_reset() to a common place > > > > > > > One more thing, I wanted to let you know about. I am already able > > to > > boot Linux in QEMU with this patch series, and u-boot master now. I > > had > > to make minor changes to the board config / environment to enable > > FIT > > images, though jumping directly to bbl + Linux with 'go' should > > work as > > well. > > Good to know. > > > I did modify QEMU slightly so that it also loads binaries instead > > of > > just ELF files. I am planning to start sending my patches to u-boot > > and > > QEMU next week. > > Do you mean QEMU's -kernel parameter? > > Regards, > Bin
Yes. I also modified the -bios parameter, though that's not strictly needed. Thanks, Lukas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
