Hi Bin, On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote: > This series adds QEMU RISC-V 'virt' board target support, with the > hope of helping people easily test U-Boot on RISC-V. > > Some existing RISC-V codes have been changed to make it easily to > support new targets. Some spotted coding style issues are fixed. > > This series is available at u-boot-x86/riscv-working for testing. > > Changes in v3: > - net patch to print the relocation address in cmd 'bdinfo' > - new patch to imply DM support for some common drivers > - reword the reset message a little, and call hang() in the end > > Changes in v2: > - Change Linux kernel entry parameters' type to support 32/64 bit > - new patch to remove CSR read/write defines in encoding.h > - new patch to pass mhartid CSR value to kernel > - new patch to move do_reset() to a common place >
One more thing, I wanted to let you know about. I am already able to boot Linux in QEMU with this patch series, and u-boot master now. I had to make minor changes to the board config / environment to enable FIT images, though jumping directly to bbl + Linux with 'go' should work as well. I did modify QEMU slightly so that it also loads binaries instead of just ELF files. I am planning to start sending my patches to u-boot and QEMU next week. Thanks, Lukas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
