On Tue, Aug 14, 2018 at 4:35 PM, Christian Gmeiner
<christian.gmei...@gmail.com> wrote:
> Am Di., 14. Aug. 2018 um 09:07 Uhr schrieb Bin Meng <bmeng...@gmail.com>:
>>
>> Hi Christian,
>>
>> On Tue, Aug 14, 2018 at 2:54 PM, Christian Gmeiner
>> <christian.gmei...@gmail.com> wrote:
>> > Am Fr., 10. Aug. 2018 um 11:40 Uhr schrieb Bin Meng <bmeng...@gmail.com>:
>> >>
>> >> At present if TSC frequency is provided in the device tree, it takes
>> >> precedence over hardware calibration result. This swaps the order to
>> >> try hardware calibration first and uses device tree as last resort.
>> >>
>> >> This can be helpful when a generic dts (eg: coreboot/efi payload) is
>> >> supposed to work on as many hardware as possible, including emulators
>> >> like QEMU where TSC hardware calibration sometimes fails.
>> >>
>> >> Signed-off-by: Bin Meng <bmeng...@gmail.com>
>> >> ---
>> >>
>> >> drivers/timer/tsc_timer.c | 27 ++++++++++++++++-----------
>> >> 1 file changed, 16 insertions(+), 11 deletions(-)
>> >>
>> >> diff --git a/drivers/timer/tsc_timer.c b/drivers/timer/tsc_timer.c
>> >> index 747f190..6473de2 100644
>> >> --- a/drivers/timer/tsc_timer.c
>> >> +++ b/drivers/timer/tsc_timer.c
>> >> @@ -341,16 +341,12 @@ static int tsc_timer_get_count(struct udevice *dev,
>> >> u64 *count)
>> >> return 0;
>> >> }
>> >>
>> >> -static void tsc_timer_ensure_setup(void)
>> >> +static void tsc_timer_ensure_setup(bool stop)
>> >> {
>> >> if (gd->arch.tsc_base)
>> >> return;
>> >> gd->arch.tsc_base = rdtsc();
>> >>
>> >> - /*
>> >> - * If there is no clock frequency specified in the device tree,
>> >> - * calibrate it by ourselves.
>> >> - */
>> >> if (!gd->arch.clock_rate) {
>> >> unsigned long fast_calibrate;
>> >>
>> >> @@ -366,7 +362,10 @@ static void tsc_timer_ensure_setup(void)
>> >> if (fast_calibrate)
>> >> goto done;
>> >>
>> >> - panic("TSC frequency is ZERO");
>> >> + if (stop)
>> >> + panic("TSC frequency is ZERO");
>> >> + else
>> >> + return;
>> >>
>> >> done:
>> >> gd->arch.clock_rate = fast_calibrate * 1000000;
>> >> @@ -377,11 +376,17 @@ static int tsc_timer_probe(struct udevice *dev)
>> >> {
>> >> struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
>> >>
>> >> - if (!uc_priv->clock_rate) {
>> >> - tsc_timer_ensure_setup();
>> >> - uc_priv->clock_rate = gd->arch.clock_rate;
>> >> + /* Try hardware calibration first */
>> >> + tsc_timer_ensure_setup(false);
>> >> + if (!gd->arch.clock_rate) {
>> >> + /*
>> >> + * Use the clock frequency specified in the
>> >> + * device tree as last resort
>> >> + */
>> >> + if (!uc_priv->clock_rate)
>> >
>> > Where gets uc_priv->clock_rate set to something? DM should set zero-out
>> > the whole uc_priv thing when bind/probe - or?
>> >
>>
>> uc_priv->clock_rate is set in timer_pre_probe()
>>
>
> Ah.. yes - with that new knowledge:
>
> Reviewed-by: Christian Gmeiner <christian.gmei...@gmail.com>
>
applied to u-boot-x86, thanks!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
