Unfortunately the v1-patches were only send to the maintainers and not
to the official mailinglist.
Am 21.07.2018 um 01:25 schrieb Grygorii Strashko:
On 07/18/2018 03:46 AM, Janine Hagemann wrote:
- Remove 0004-Net-phy-ti-Fix-fifo_depth-register-write.patch because
of the change from 0005-net-phy-ti-Recover-from-port-mirroring-
N-A-MODE4.patch it isn't needed anymore. Before, the MII_DP83867_
PHYCTRL-register wasn't write correctly without the fix-patch.
I can't find v1 of this series, so above comment looks strange.
What's wrong exactly with "PHYCTRL-register wasn't write correctly"?
- correct commit reference format
Janine Hagemann (11):
arch: arm: mach-rockchip: rk3288: Enable regulators in board_init
config: phycore-rk3288_defconfig: add PHY_TI
net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii
net: phy: ti: Add lane swapping support in the DP83867 TI's PHY
driver
net: phy: ti: Recover from "port mirroring" N/A MODE4
net: phy: ti: add workaround for incorrect RX_CTRL pin strap
net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID
drivers: net: designware: Add reading of DT phy-handle node
net: phy: ti: Add binding for the CLK_OUT pin muxing
ARM: dts: rockchip: ADD dp83867 CLK_OUT muxing
rockchip: rk3288-phycore: set flash1 iodomain to 1.8V
arch/arm/dts/rk3288-phycore-som.dtsi | 1 +
arch/arm/mach-rockchip/rk3288-board.c | 6 ++
board/phytec/phycore_rk3288/phycore-rk3288.c | 16 +++++
configs/phycore-rk3288_defconfig | 1 +
doc/device-tree-bindings/net/ti,dp83867.txt | 3 +
drivers/net/designware.c | 11 ++-
drivers/net/designware.h | 1 +
drivers/net/gmac_rockchip.c | 80
++++++++++++++++-----
drivers/net/phy/ti.c | 104
++++++++++++++++++++++++++-
include/dt-bindings/net/ti-dp83867.h | 15 ++++
10 files changed, 219 insertions(+), 19 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
