We have to use RK3328_RXCLK_DLY_ENA_GMAC_ENABLE instead of
RK3328_RXCLK_DLY_ENA_GMAC_MASK in rk3328_gmac_set_to_rgmii()
to enable the RX delay.
The MASK was used in a wrong way.
Signed-off-by: Janine Hagemann <j.hagem...@phytec.de>
---
v2: No changes
---
drivers/net/gmac_rockchip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c
index 30a24d1..0f91731 100644
--- a/drivers/net/gmac_rockchip.c
+++ b/drivers/net/gmac_rockchip.c
@@ -350,7 +350,7 @@ static void rk3328_gmac_set_to_rgmii(struct
gmac_rockchip_platdata *pdata)
RK3328_RXCLK_DLY_ENA_GMAC_MASK |
RK3328_TXCLK_DLY_ENA_GMAC_MASK,
RK3328_GMAC_PHY_INTF_SEL_RGMII |
- RK3328_RXCLK_DLY_ENA_GMAC_MASK |
+ RK3328_RXCLK_DLY_ENA_GMAC_ENABLE |
RK3328_TXCLK_DLY_ENA_GMAC_ENABLE);
rk_clrsetreg(&grf->mac_con[0],
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
